Can I use iMac runs El Cap as a wifi point instead of airport Time Capsule

Similar Questions

• Can I use Apple TV with airport Time Capsule 3 to 4

  Can I use Apple Airport Time Capsule 3 to with Apple TV 4 as available storage to stream my movies, etc.? I tried external hard drives but Apple TV will not read them.

  Not directly, it would have to be pointing at iTunes and listened to using home sharing

• I can't use the 'sharpness', the field is marked in gray instead of the stronger color when it is possible to use. If someone of you know why and how to fix it?

  I can't use the 'sharpness', the field is marked in gray instead of the stronger color when it is possible to use. If someone of you know why and how to fix it?

  Hi Eva,

  Could you please for the preferences of Photoshop, then tab Perfomance.

  In here please see, if the option "Use Graphics Processor" must be verified.

  These filters are largely dependent on the graphics card.

  Respect,

  Tanuj

• Time machine can finish no backup on airport time capsule

  Time machine can finish no backup on airport time capsule.

  explanation: there is no access to the/volumes/data-1/macbook diskcopiefile xxxx.sparsebundle that is used to back-up pro (error (null))

  The network failed to halfway through the backup.

  To resolve this problem, we need to know your complete network type.

  This modem do you have? Brand and model please.

  Who is your ISP? It is important for the IPv6 configuration.

  What model is the TC?

  What the configuration of TC in the network?

  How old is the MBP? If you have an ethernet port that you use it instead of wireless?

  Is this a first backup? Or were you works well for awhile and it's broken now?

• I just can't get my Airport time capsule on the internet.

  I bought an airport Time Capsule and a MacBook Air, have set up their, I access my files inside the airport TC, but I can't access the Web, away from home.

  What should I do?

  It is necessary to have a Mac at home connected to access?

  Setup using Airport utility it does not appear to me the ability to access over WAN. How can I do?

  I already configured the back to my mac option.

  Can someone help me?

  Please take a look at the following airport user tip for, at least, three methods to access your Time Capsule from a remote location.

• Step by step instructions using airport Time Capsule as backup for my Mac

  Step by step instructions using airport Time Capsule 2 TB as backup for my Mac

  Use Time Machine to back up or restore your Mac - Apple Support

• * Creating Cloud * [can I use two different applications of cloud on different computers at the same time for example Photoshop on one and on another InDesign?]

  So I know that you can have creative cloud up to two computer and its not of platform specific, so you can have it on a Mac and the Windows platform at the same time. BUUUT I know that you can not use them simutaniously, but which still apply to the when im I need to work on photoshop on only one computer and indesign on another who would always use them at the same time so he would evict me? or can be used on two different programs at the same time?

  Always there was confusion on this issue.

  Adobe said yes in 2012 and 2014.

  Running different applications - 2 computers, a single license

  Contradictory information on the simultaneous use of CC.

  Don't know the current position of Adobe.

• can I use airport express to extend the range of my Airport time capsule

  I want my airport express (model 1382) to be subordinated to the time capsule (ver. 7.7.3) and I'm on a different network. Is this possible?

  Do not know what you mean by 'subordinate' here... and you do not specify if the AirPort Express terminal connects to the Capsule using a permanent, wired Ethernet cables... or... If you want to try to have the AirPort Express to connect wireless to the time Capsule.

  The method cable would be far superior to the method wireless in terms of performance and 'slide' on the Time Capsule wireless.

  You also did not indicate what device... a Mac, an iPhone / iPad, etc that you want to use to configure the AirPort Express Terminal.

  So, when we have more information, we can provide you with an accurate answer to your question.

• can I use all in one series printer series to efax instead of fax data modem?

  Hello
  Can I use 'everything in a series' printers (printer, scanner, copier and Fax) to receive faxes in my Inbox? i.e. efax, otherwise let me know on the hardware that is used to receive faxes in computer science.

  You can get an Efax service but it's not free.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• How can I unforget airport Time Capsule?

  I was in the Airport utility and 'forgotten' my Time Capsule airport.  The most convenient airport seems to work very well, but I can see it is no longer in the graphical presentation.  How can I fix so that I see once more the airport?

  Try a cycle of complete nutrition of the network as follows:

  Power off all devices... modem, routers, computers, iPhones, printers, etc. in the order you want

  Wait a minute

  Start the modem and let it run alone for a few minutes

  The device connected to the modem to start and keep running a minute

  Keep the commissioning of the devices at once a minute outside until the entire network is back

  Check if the airport appears now and communicate your results.

  IF... the airport does not appear in the utility AirPort... are you still using OS X (10.7.4) on your Mac, you put in your profile, or you have updated to a more recent operating system?  If so, what system would be that?

• My Airport Time Capsule can act as a WIRELESS access point

  Hello.

  I brought a Time Capsule with my Mac Pro. It worked well since yesterday.

  I have set up the time Capsule as a WIFI, bypass at my local network access point. There is a router (cable) works at home.

  It's my Mac Pro AirPort Utility and my iPhone, my Time Capsule is displayed with an exclamation point saying "device not found". I can't connect to the disk on this subject by afp share, or smb. Time Machine function is gone too. He failed trying to connect to the share drive from another computer connected to the time Capsule by cable network.

  But at the same time, WiFi works well.

  I tried to recycle energy. Sharing disk will be available. But if I start the Time Machine backup, it will not be a few seconds.

  Any idea?

  Thank you.

  There are several posts here related the issue.

  Luckily, you have set up your new Time Capsule for Back to My Mac (BTMM)?

  If so, the 'temporary' solution is to delete/disable the option of the CCMM, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

  If you have not enabled CCMM, we have other options for you to try.

• Purchased airport Time Capsule in the USA and the cord specifies 125V. I can hook it up to 220 V?

  Bought time Capsule airport in the United States

  power cord said 125v

  Can I use it on 220 V?

  K Dolega

  Yes, Time Capsule will work on 100-240 v and 50-60 Hz automatically.  So, you may need an adapter to plug the power cord into the wall outlet, but you don't need a voltage converter.

  Some channels of wireless 5 GHz no longer used in the United States are not legal in other parts of the world, so it may be wise to use the lower 5 GHz channels numbered to avoid any problems.

• How can I connect my Airport time capsule to the nbn optus

  I just got the NBN Optus connected and time capsule doesn't seem to work, can anyone advice on how to connect. I connected to a modem (Sagem Fast 38640op) with cable but the mac does not expect a return to the top

  You should do a full factory reset on the TC...

  Repeat the installation... and it should work correctly in bridge and create a wireless network.

  The Sagemcom really poor wireless but you can leave it on... use it for your network wireless of comments.

  This is my normal configuration guide... but there are a few specific pieces to network problems with the operating system later as Yosemite or El Capo.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

• our airport time capsule connects to computers and the internet, but does not record on the usefulness of the airport as being there - is it dying or is their a reset?

  Our computers connect via wifi to a capsule of time to the airport and to the internet, but can't find the time capsule, nor can its hard drive. Y at - it a reset, we can try or he dies. It's only a couple of months.

  Turn about your Airport Extreme for 15 seconds and then power back on. As soon as you see the green light, you should be able to see him for a minute or two in the Airport utility. In the affirmative, and see if you have Back to My Mac active. If so, disable it by removing all the e-mail addresses of the back section of my Mac. Then update your Airport Extreme. Work quickly.

  Many have started having this problem within the last week, probably because Apple changed something in its servers CCMM. A real difficulty would come from Apple, but it should work if you currently have active CCMM.