Can not disable windows and put an another activation code
I read on one of the threds here this
If it's an OEM license - No. OEM licenses are bound to the first computer, they are installed on and cannot be transferred to another computer.
It leads me to ask about my problem. I used my laptop OEM activation to activate the windows on my computer. He lets me activate and reported as authentic but a guy who helped me clean this model of think of malware, I have NON-genuine windows. Now I have another windows XP SP3 that I haven't used and I want to put this code, but XP won't let me.
When I do
before you perform the following steps:
1. click on start and then click Run.
2. in the Open box, type Regedit and then click OK.
3. in the left pane, search for, and then click the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\Current WPAEvents
4. in the right pane, right-click OOBETimer, and then click on edit.
5. change at least one digit of this value to deactivate Windows.
6. click on start and then click Run.
7. in the Open box, type the following command, and then click OK.
%systemroot%\system32\oobe\msoobe.exe /a
When I do that said windows is already activated. I can't start a new activation process.
This keeps back restore registry value
OOBETimer
I even tried KeyUpdateTool_enu.exe and said that the new activation number is the same as on the machine.
This is apparently a problem
Scan of MGADiag.exe
--> HWID data
N/A
Activation 1.0 data OEM-->
BIOS string matches: no
BIOS marker string: N/A
Marker of OEMBIOS string. DAT: GIGABYTE
Activation 2.0 data OEM-->
N/A
Any suggestions?
Hello Nicolas.
I'm sorry but I did another post to solve this problem.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/Hi-there-i-installed-a-new-Windows-is-this/49f8f2ec-c34f-4167-bef6-6356b45eb675
When I made a mistake was I activated by the phone which was in my laptop for the same number and then I couldn't access the second telephone activation because it wouldn't take me to the screen where I had the instalation numbers to type to get a new code "abcdefg". Idid clean reinstall and it's good now.
If this issue is resolved and you can close this thread.
Thank you very much.
C.
Tags: Windows
Similar Questions
-
I have lightroom on two computers, can I disable one and put it on another device
I have lightroom on two computers, can I disable one and put it on another device.
My dell desktop computer is broken and I want to use my lightroom on my other computer I have that its not let me because I have a two.
Assuming that you are talking about 6 Lightroom Lightroom CC (which version are you talking about?), you must use the Cloud on Sign Out creative application on a computer before you can install it on another computer.
-
Windows Vista restore
My phone fell, and I can not get Windows to start. The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?Have you had your laptop, checked by a technician?
If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.
-
* Original title: Windows 7 - CD to USB
I bought Windows 7 (the two CD 32 & 64) many years for use on my early 2008 MacBook Pro, with an optical drive, via BootCamp. It worked very well.
Now I have a new MacBook Pro without optical drive, but would like to install BootCamp and use Windows again.
How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?
Thanks in advance for your help.
Use Rufus:
Rufus - create USB bootable the easy way discs
Another solution:
http://www.AddictiveTips.com/Windows-tips/create-bootable-Windows-7-USB-flash-drive-from-DVD-disc/
-
I have a license of cs6 ps for windows but I change with mac, can I disable win and activate for mac?
Please check: a product for another language or version of trading platform
-
I can not disable on Windows 7 jump lists.
I can not disable on Windows 7 jump lists. I unchecked the box properties of the system, but the jumplists show always upward. How can I disable the jumplist?
You say jump lists do not display files recently opened by a particular program, but the jump list itself cannot be disabled. These lists were built by the creator of program that allow you of "jump right in" a task such as right-clicking on the mail program allows you to instantly create a new email without having to open the program first of all of the tasks.
-
At my computer crash. Have a license number for Adobe Acrobat 8 professional. New machine and it says active because I can not disable computer crashed.
You must have Adobe disable and reset your activation meter
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link below
Serial number and activation support (non - CC)
-
Inspiron N7010 can not disable the Touchpad
I have an Inspiron N7010, Windows 764 bit, it was determined that the hard drive was once again, therefore, dell sent me a new hard drive, I made an image of the system on an external hard drive, then installed the new hard drive without any problem. BUT after getting thru all the updates I noticed the touchpad has been activated and I always use a usb mouse, so I like the touch pad disabled.
She used to take a minute to turn it off, now nothing works going on at the control panel and mouse properties gives me NO option to turn it off, I'm pretty sure that the last time this happened a Dell technician downloaded a different driver and it sets like that, but I don't remember for sure. I went to Dells driver support and let Dells Diagnostic scan my computer and tell me what I need drivers. I down load them and installed what he said and it came that I already had newer drivers than those it says to download, I just download them anyway to make sure and NOT luck.
Is there maybe another driver I'm missing, or could I do something out of order, when I installed the new hard drive and loaded my system from the last hard disk image? Everything went very well, I thought, I have NO problem with my mouse external, other that I can not disable the touchpad or the touchpad and it makes me crazy lol. I sincerely appreciated any ideas or help with this.
Thank you in advance!
I GOT MY ANSWER!
I found my driver and Utilities disc provided with my computer and found the touchpad on the disk driver and installed it on my computer and after restarting, I went to my mouse and presto, now I have the RIGHT driver, so I'm HAPPY to REPORT that THIS has been RESOLVED!
Thank you and HAPPY HOLIDAYS!
-
Satellite L650-11R: I can not disable the WiFi using Fn + F8 module
Hello!
I have a rather strange problem: I can not disable the WiFi using Fn + F8 module.
It happens after reinstalling Windows. I installed Windows 7 Pro SP1 x 64 (MSDNAA). I installed the driver Broadcom WLAN, then Toshiba Value added package and Bluetooth Stack from Toshiba Web site.
When I press Fn + F8 there is only a Bluetooth icon, I can enable and disable. And there is no WiFi icon.
Wireless network card is listed in the Device Manager, it works.Before you reinstall Windows, when I had used pre-installed Windows 7 HP, it worked correctly: there were three icons, I could turn off/turn on WiFi, BT and the two WiFi + BT by pressing Fn + F8.
Does anyone have a problem like this?
Can someone help me?Thanks in advance.
Hmm generally the FN + F8 should switch on / off the Wlan correctly.
Maybe the WLan driver must be installed again even if the wireless network adapter is already visible in Device Manager.
Try itWelcome & good luck
-
How can I uninstall Vista and put Xp back on__
How can I uninstall Vista and put Xp on, Windows Installer could help to put Xp back on?
General information about replacing Vista with XP:
A. on a computer OEM (HP, Sony, etc.):
1. go to the OEM Web site and find the XP drivers for your specific model computer. If there is no XP drivers, you can not install XP. End of the story. If there are drivers, download them and store them on a CD - R or USB thumbdrive. you will need after installing XP.
2. check with the OEM - either since their technical support site, either as - to see if you will cancel your warranty if you do this. If void you your warranty, you make the decision.
3. If the OEM supports XP on the machine, call them and see if you can qualify to demotion and ask them to send you a XP restore disc. This is by far the easiest and best way to put XP on the machine.
4. if XP is supported on the machine but OEM does not have a disk to restore XP for you, understand that you will need to buy a copy of XP to your favorite online or brick/mortar store retail.
5. also understand that you will need to do a fresh install of XP, so if you have any data you want back first.
6. If none of the above applies to you because you can't run XP which return (see point 1 above), the computer of the machine and buy a running XP instead.
B. on a generic/home computer built (of the non - OEM company)-you will need the drivers for all your hardware. See the second link below for more details:
http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic! -
Why my computer can not find windows Defender?
Why my computer can not find windows Defender?
Hello
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
and read this information to microsoft:
Error message when you run Windows Defender: «Error 0x800106ba»
http://support.Microsoft.com/kb/931849
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial;
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this program;
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
How can I disable Windows 10 upgrade notice?
* Original title: 10?
How can I disable Windows 10 upgrade notice?
Microsoft Official method-->
How to manage Windows 10 notification and update options
Another (perhaps easier to use) method--> GWX Control Panel
-
my site is using dreamweaver cs4, I can copy all my and put them in dreamweaver cs6 without any problem?
The simplest way to use CS6 on a former site of CS4 on the same computer would be of...
1. open CS4 and choose Site > Manage Sites
2. Select the site and choose export
3. This will create a your site settings .ste file (no site file is stored in this)
4 close the CS4 and open CS6
5 CS6 hit Site > Manage Sites > import to bring these parameters from the .ste file
This will give you the same exact settings (FTP and otherwise) of CS4 in CS6 while using the same files the.
If you use another computer together, you will need to make a copy of your local site on the new machine folder, and then export/import the .ste as above with an extra step possible Reassociation the local site on the new machine folder, if the structure/location of the file is not the same between machines.
-
The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.
Depending on what you mean by "voice command", either:
Settings / general / accessibility / VoiceOver / OFF, or
Settings / Siri / OFF
As for your use of the battery, you can check what app pulls most of its use in the settings / battery. A new version of the app is sometimes problematic, not necessarily iOS or iPhone. If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes. If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:
Restore your iPhone, iPad or iPod touch from a backup - Apple Support
-
Boot Camp can not detect Windows software support
Hi guys!
1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:
http://postimg.org/image/9mly0tvjl/
2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!
http://postimg.org/image/tg97p5fu5/
3 and now it was time for step 3:
http://postimg.org/image/554gf7i3x/
After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...
It is said that: "Boot Camp can not detect Windows supports software.." and so on.
Where do you think the problem is? Is - this problem on the ISO file?
I would appreciate any kind of help,
Thank you.
What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .
Maybe you are looking for
-
How to connect USB 6259 so that I can generate trains of pulses of a meter
Hello We just bought NI USB-6259 BNC. We used to use BNC-2110, which integrates the connectors BNC for trigger and the meter so that we can send trains of pulses through it to our electric Stimulator. However, I find no terminal BNC for the output of
-
Main menu OSD on my hp pavilion f1703
Main menu osd blue overlaid with offset menu brightness/contrast in the center of the screen of my hp pavilion f1703 monitor. How can I remove it?
-
Outlook Express messages cannot be moved or deleted on XP
Original title: using XP and Outlook on PC. Cannot access Outlook Express all of a sudden. I can't move in my messages even remove. I get through my messages on my laptop but not my PC. Why he would just this work to quit smoking?
-
Color LaserJet 2605dn: changing the toner cartridge guaranteed?
Can someone help me to replace what seems to be a faulty cartridge? I could find absolutely no information on how to do it on HP's Support website to the regular address. Q6003A magenta toner cartridge prints very light. Looks pink instead of magenta
-
Parameters of endpoints of updating without reinstalling
Is it possible to change the settings for an endpoint through the registry rather than reinstall the end point? For example, the following settings are configured during the install: SERVERHOSTNAME, POLICYPROXYHOSTNAME, DEVICESERVERURL If so, which k