Can not get to work in Win7 homegroup sharing

Similar Questions

• Can not get debugging working

  Hello I'm here to ask another stupid question.

  I can run my code very well but can not get the debugging work. When I click on debug that code runs immediately but in flash builder it says launch ProjectName (percentage)

  and it takes quite awhile ~ 3-4 minutes and then I get the error message

  Unable to connect; session has expired.
  Ensure that:
  1. you compile your Flash application with debugging on.
  2. you run the debug version of Flash Player.

  any ideas?

  Hey chris,

  from the looks of it, two things can be wrong here. check your debug configurations and search two fields for the IP address and the IP address of host debug. Was that changes of IP address of your host (DHCP) and you need to update periodically in your flash builder settings. You can check your IP address using your command prompt and appropriate controls (ipconfig / ifconfig). Good luck!

• I can not get my work window Defender

  I hit the defender of the window and I can not go to work it says contact your computer peron and he says to activate Group Policy

  Hello anonymous 334,

  Thanks for posting on the Microsoft answers Forums.

  Make sure you have Windows Defender active:

  1. Open Windows Defender by clicking on the button start , clicking all programs, and then click Windows Defender.

  2. Click on tools and then click Options.

  3. Under the administrator options, select or clear the check box use Windows Defender and then click Save. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     Do you have any other type of antivirus installed on your computer? What other security products are installed on your host computer (anti-virus, anti-malware, anti-spam, firewall, etc.)?
     These can interfere and stop Windows Defender from work. I would try and disable the other product temporarily and see if Windows Defender starts.

     When you enter the Services (services.msc), the Windows Defender service applet is listed for the automatic start mode? This is shown as disabled, then it never starts.
     If it is shown as currently stopped (with automatic or manual startup mode), can manually start you it?

     You have errors where the viewer in the application log dealing with Windows defender? If so, then that can give you a clue as to what is perhaps the problem.

     If please reply back and let us know the results of your tests.

     Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BlackBerry smartphones can not get BBM working or the Facebook app

  A few months from my blackberry but I still can't work of BBM, I have a contract with 250 MB internet and I can use the normal when browser im out and about. I cannot use the Facebook app when I am connected to WiFi. My BBM says (waiting) when I add a person, and it does not show that I added them on their phone. I'm on Vodafone,

  Thank you

  so here is the question... you do not get a password business unless you are on a BES plan, it is for professional use... for personal use, you would use BIS (blackberry internet service)... to do this, you need a data plan activated BIS, chances are, your data plan is not for Blackberry use...
  I would give Vodafone a call and check your tariff plan.
  Once you have a plan active BIS, will allow you to have another option other than of the company e-mail configuration.

• Equium A300D - 13 X can not get any sound using Win7 32 bit

  Hello

  ive installed win 7 home premium 32 bit but can't get any sound.
  I downloaded the drivers available here but still no joy?

  I then started to vista only to find yet, I couldn't get all of her even if the drivers installed etc...
  Also read here that it's realtek hardware so I downloaded drivers off there website but still no joy.

  Any help would be appreiciated

  Thank you

  Hi mate

  You installed a wrong driver sound!
  The laptop supports the audio chip Conexant CX20561! It s NOT Realtek but Conexant!

  You must use the Conexant audio driver

  Please see the page of the European driver Toshiba again! The satellite * A300D box contains the correct Conexant audio driver!

  Welcome them

• I can not get my work access restrictions, regardless of what I do... can help you?

  I use a WRT54G Router I've had for almost two years.  It has the original firmware (v1.00.6, January 20, 2006) and worked perfectly, since I installed it.  Both of my two children (18 +) have NOW laptops, which they keep in their room, and I have problems with them staying up for most of the night on facebook or myspace, when they have to sleep.  I tried to just disable internet from 12:30 to 07:30 with access restrictions, but can't make it work little matter what I do.

  I use only one policy (called nolatenights).  I checked the button and the button, left the button checked, selected the button and selected, the time from 12:30 to 07:30 as the time setting.  I tried entered the MAC addresses of the two computers and set the "IP Range" of the "102 ~ 109.  BTW, I also have the "Wireless MAC Filter" active and the value of «Authorize only the computers listed...» »

  What I am doing wrong?

  
  

• R7000-can not get to work with iptv

  Hi, I have problems to make my r7000 working with plusnets iptv... Recently signed to it and they sent me their shitty router that feeds their iptv perfectly but I can't figure out how to get the nighthawk for this...

  Current firmware 1.0.4.30. in advanced settings, there is an option allowing to the VLAN / bridge I had some success using: iptv works for a bit, but not internet traffic outside of iptv is passed to the youview box - so can't watch netflix etc. It stops also work after I have change the channel so it does not seem in any case the right fix

  PlusNet cannot provide me details for tag vlan, so don't know not where to go from there... every time I have activate the Internet is not just connect - tried VLAN 10, 101, 301 and the thing that I could think of...

  I read that there is an option to enable the VLAN / IPTV on some firmwares, but I don't see "enable VLAN / Bridge" on mine.
  This feature is still supported on the R7000? or would be running DD - WRT work?
  I hope someone can help
  Thank you

  bill1228 wrote:
  Cannot talk about DD - WRT and IPTV, but later XVortex firmware supports IPTV and is made to work. Of course, there is the matter of that will work with your provider?
  Link to this info:
  http://www.linksysinfo.org/index.php?threads/asuswrt-Merlin-on-NETGEAR-r7000.71108/page-11#post-2636...

  Link to the news of the firmware:
  http://www.linksysinfo.org/index.php?threads/asuswrt-Merlin-on-NETGEAR-r7000.71108/

  Works fine on my r7000.
  -Bill

  And we have a solution! Flashed the CFW, a quick reboot of the router, and a bit of higgery pokery - work with enabled IPTV YouView.

  Here's a note in case others run into this forum and fall into the same obstacle. These are the settings you need once you have flashed the CFW:

  You must configure 'Enable VPN + connection DHCP' to 'No' to the terms of the WAN option.

  Parameters used were:

  -Have the router to the latest firmware: 3.0.0.4.374.130

  -Use the following settings in the LAN > IPTV:

  -"Select the ISP profile" = None

  'Choose the Port STB IPTV' = None

  -"Use DHCP routes" = Microsoft

  -"Enable routing multicast (IGMP Proxy) = enable".

  'Enable the effective transfer of multicast (IGMP Snooping) = enable ".

  -' UDB Proxy (Udpxy) = 0

  I hope this proves use for others in the future and thank you for all your help.

• can not get netframe work 3.5 service pack 1 to install always get an error code ox643

  I have a hp windows xp x 86(32 bit) media center 2005, I tried for about 3 to 4 weeks to get to dragon speaking naturally premium to install on the computer > it will not install because it says I have to install netframe work 3.5 SP1 in order so that he can install it. . When I try to install the netframe 3.5 I get a code error message 0 x 643. Is it possible to get the netframe work 3.5 service pack 1 to install when the netframe who entered the computer is part of the operating system. I tried to eliminate the netframe 1.1 work with the system, but also many other programs is tied to it and would not be able to serve.

  HELP PLEASE!

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  If necessary:

  Order of relocation:

  1. .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
  2. .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  3. .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  4. .NET framework 4

  For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx

• Newbie #2 - got AnyConnect works, can not get to work computers

  This simple solution is beyond me!

  I got work AnyConnect successfully and I can get a VPN connection to my public static IP (69.x.x.x). I can ping devices on my home network (10.x.x.x) and surf the Internet from my PC at home, but I can't ping any computer on my work network (192.x.x.x).

  I added a NAT exemption rule (please see attached screenshot of the NAT exemption rule) and I entered the command management-access to the Interior of the ASDM, but I still cannot ping any computer work.

  Thank you!

  And also,.

  Just to make sure the connections/ICMP traffic works in what concerns the firewall settings.

  Make sure you have ICMP inspect enabled on your firewall.

  My firewall is the newest software, so I'm not 100% sure if the menus/options are named in the sameway about your ASDM software.

  Try to navigate in the following sections

  • Configuration (in the top bar of the WHPA)
  • Firewall (in the lower left button)
  • Policy rules (in the lefhand side with which is visible after the choice of the previous section "Firewall)
  • There should be something called "inspection_default" in the main window
    • Click to select
    • above, it is the "Edit" button, click it
    • In the opening window, go to "Rule Actions.
    • Check the box in the section "ICMP" and then apply the configurations

  There was also a 'Search' function in the ASDM. Somewhere in the upper part of the window of the ASDM may be. If you type write "inspect" it (without the quotes) you should get the results of a search that takes you to the section where you can change the configurations "inspect".

  If you have the SAA in pretty basic configuration, you could simply "drop" these lines of the ASA configuration by choosing

  • Tools (from the toolbar above)
  • Command line interface
    • Choose several line
    • Copy and paste the below configurations
    • Press 'send '.

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  -Jouni

• Can not get to work harvest

  My crop tool won't work normally.

  Windows 7, Photoshop CS5

  Case No.: 182087691 I was instructed to remove the Photoshop CS5 file found in C:User\owner\AppData\Roaming\Adobe where I could find a file named Photoshop CS5.

  I was responsible for renaming it Photoshop CS5.old close the program and restart.

  Now, the problem resurfaced, and I can't find the file.

  The problem with the crop tool is that a ration fixed height width doesn't work. A dimension is dependent on the other not independent.

  [email protected]

  Thank you.

  You do not discuss Adobe here in the user forums.

  "File number" that you cite is totally meaningless here.

  Here is the solution for you, if:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Note: If this process doesn't work for you while you are using a wireless (Bluetooth) keyboard, attach a wired keyboard and try again.

  Important: If you re-create the preferences by removing the Adobe Photoshop CS6 settings file, make sure that you only delete this file. If you remove all of the settings folder, you also delete unsaved actions or presets.

  Reinstallation of Photoshop does not remove the preferences file. Before you reinstall Photoshop, re-create your preferences.

  NEW video! Julieanne Kost has created a video that takes you through two ways to reset your Photoshop preferences. Deleting manual preference file method is between 0:00 - 05:05. The keyboard shortcut method is between 05:05-08:18. The video can be found here.

  Mac OS

  Important: Apple made the library folder user hidden by default with the release of Mac OS X 10.7. If you need access to the files in the folder hidden to perform library related to troubleshooting Adobe, see How to access the hidden user library files.

• Can not get the work of tween movement!

  I'm new to Flash and work on creating a simple animation. I have prepared objects, but the problem is that I can't run motion tween. As a result, I tried a just very basic motion tween increase the size of text from one frame to the other and cannot even that work. I followed the basic steps, text converted to symbol etcetera objects. What is seen is for executives from 1 to 9 it does not change and in the frame of 10, there is a change suddenly in size. I also note that there is no "arrow" observed in the interpolation, as shown in an example tutorial.

  What is the problem and how can I solve this problem? Appreciate the pointers.

  Yes, you are looking in the correct place ("Inspector" is the official term - it is confusing because it is not at the top of the Panel).

  The reason why you don't see it is because you are using a new motion tween. Sorry, I thought you were in a classic tween, but then I realized it was someone else (they should seek scale option!)

  To resolve, all you need to do is move the playhead on the location of the span where you want the ladder at the end, and it fits. No keyframes required.

  I recommend watching the migration guide from the movement for the other differences between classic and new motion:

  http://www.Adobe.com/devnet/flash/articles/motion_migration_guide.html

• Windows Police Pro denies access to most of the tools. I can't boot mode safe. Can not get to work Bishop burned CDs by malware, but it does not work. Copied the files on the desktop malware and it still does not work. Does anyone have a solution?

  Other than the inability to get to the the Task Manager, Regedit and Safe Mode there are no further details.

  See the Remove Windows Police Pro (removal Guide) at bleepingcomputer.com

• I can work between my Mac and iPad, but can not get my iphone to receive transfers?

  I can work on spreadsheets Numbers between my Mac and iPad, but can not get my iphone to receive transfers?  The numbers icon at bottom left of the screen, but none of my worksheets appear on my iPhone.

  Did you numbers is synchronization correctly via iCloud on your iPhone?  You could check that the connection of numbers to iCloud is turned on at two places:

  Settings > iCloud > iCloud Drive > numbers

  and,

  Settings > numbers > use iCloud

  SG

• My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista.

  Original title: internet telephone

  My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista

  Hello

  1. What is the brand and model of the phone and Bluetooth adapter?
  2. what exactly happens when you access the internet via your phone?

  Please provide more information. This will help us assist you better.

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Also, please take a look at the below items that might help you.

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.