Can't access previous computer with activation

Similar Questions

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• I can't access the internet with any browser without proxyfire

  I can't access the internet with any browser, without proxyfire software & internet option checked to see if the proxy server is marked or not. I think I checked everything I know now I will be honerd if someone help me with this problem.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  3. what version of Internet Explorer is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Try the following steps to turn off the Proxy connection and check if it works.

  Follow the steps to disable the proxy:

  a. open internet explorer.

  b. click on tools and then click Internet Options.

  c. click on the Connections tab, then click LAN settings.

  d. turn off the server to use a Proxy.

  e. click on apply then Ok to save the changes.

  Hope the information is useful.

• I can't access the computer on which I have installed the software the first time

  Hello, I have purchased a license with VIP account and installed on an iMac. Le computer crashed et I had to change it. I bought a new iMac et installed le creative cloud once again.
  Now I have to Install it on a laptop, but I can not do because the first permit is always connected iMac broken.
  I can not access the computer on which I installed the software the first time.
  
  How can I fix the problem ?
  
  Thank you very much

  Contact Adobe technical support (after the end of the week)

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Can I reformat a computer with vista media center edition on it and thenperform a new installation of xp? I don't like vista?

  Can I reformat a computer with vista media center edition on it and then perform a new installation of xp? I don't like vista and want to go back to xp.

  Hello

  If you have an XP disk and license, you can go back to XP

  but make sure that the manufacturer of your computer has XP drivers available for this model computer

  If you have not an XP license try to buy one at a computer repair shop

  you boot from the XP disc and format in this way:

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to perform a clean Installation of Windows XP - Part 1 of 4

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

• I am adadministrator but I can not access my computer functions

  2 days ago, I think I've accidentally changed my security settings for my: C drive while checking my computer ( don't know if this is the real reason however). I am the administrator on the computer and there is no other users. whenever I connect it denies access to my characteristics.  on the accounts in the control panel it says that I am administrator but he always tells me that I need to contact my administrator when using functions as the uninstall programs and features.  I ran an avg full deep scan off my computer and his own come so I'm almost certain that this is not a virus.  I'm running Windows Vista Home premium and I've never experienced this before.  whenever I start the computer, it starts to fuck as usual and then I get loads of pop ups for example:

  -Google Installer has stopped working
  -Apple sync notifier "could not start because corefoundation.dll was not found (I've never heard of corefoundation.dll)"
  -browserprotect.exe has stopped working (and whenever I close the pop up back to the top again)
  -When I go to access some of my files and applications it says 'you have insufficient access, please contact the administrator '.
  -When I try to access to my: C drive, it says ' not accessible, access is denied. "
  -When I go to access the features a bit it says "the parameter is incorrect" (not sure what that means)
  I'm usually a computer wiz and use of high-quality software, command prompt and all that, but I have trouble understanding it, so don't you worry I will understand any technical language, thanks :)

  Hi Oliver,

  Exactly how you have changed the security settings for the C: drive?

  Problems to work on files and folders in Windows can be caused by permissions issues, or even corrupt corrupted user accounts.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670#method4

  Method 2:
  If the problem is not resolved, I suggest you temporarily disable the security software and check if it helps.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  
  Method 3:
  If the problem persists, I suggest you try to run the system restore to point before that the problem began earlier and check if that helps.

  
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  
  Note: when you do the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• To access the befw11s4v4 with active e4200

  I have a Motorola modem cable with switch 8 ports, connected on it. I have also E4200 and BEFW11s4v4 connected to the switch. I used BEFW mainly ports to connect my directv box and blu - ray DVD player to the internet in another room.  I noticed a very good signal from befw11s4v4. I would like to turn it off or use the wifi b, but I forgot the password to it and I can not install befw11s4v4 with active E4200. (192.168.1.1 is taken by e4200). How can she (befw11s4v4)?  I don't want to reset befw11s4v4 because that would make its unsecured wifi. Can I use a laptop computer to install befw11s4v4 and change its IP 192.168.2.1 address, for example, but I would like to power access time (E4200 and befw11s4v4) to my desktop PC. Any advice will be greatly appreciated.

  Thanks for your reply. Of course, I couldn't access two gateways with one LAN port on my desktop at the same time. I have connected my laptop to BEFW so I was able to transform the 'b's broadcast, which was not connect in any case. I use my old router BEFW for 'tax' reasons, it works very well with my directv box and blu - ray. Don't want to spend the money immediately on another switch or run another 50 ft. of cable.

• my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

  My sony vaio laptop running windows vista has completed an automatic update and after that, I can't connect to my wireless network, I can access the internet with an ethernet cable.

  It worked perfectly fine before the update, I know that there is a problem with what I had the same problem in the past. The way it's been solved previously was to restore the laptop to an earlier point before the end of the update. Unfortunately I can't do that and the laptop has been completed, wiped and there is no backup where I can go to restore.

  I know I can remove some updates but don't know what 1, me it is another way to solve the problem.

  Your help would be much appreciated.

  Thank you

  Hi Nadzarif,

  You can try the following steps and check if it helps:

  Method 1:

  Because the wireless stopped working after windows update, you can check the Sony support link and try to install the latest version of the drivers for the wireless card and check if it helps:

  Sony support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Updated version has a problem in the history of the update.

  Step 1:

  You can check in the history of the update for the updates that are installed recently or before the show.

  a. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  See the Windows updates are installed

  Step 2:

  Uninstall recently installed updates and install the updates one at a time to understand what update is the cause of the problem.

  For more information, see the articles:

  Remove an update

  Install Windows updates

• BlackBerry Smartphones can not access Media card with BB Desktop or Media Sync 9700

  The other day I received a Reburbed Bold 9700 update.

  I use Ver 6 Deskstop OS and the 9700 is running device code latest version 5.

  I have a Kingston 4 GB media card that I know is in place because the 9700 recognizes it and when I go to files and select the media card, I can see all the files on the card and when I take a picture it is written on the card so I know that memory is very good and he sees the 9700.

  The problem I have is BB Deskstop or latest version of Media Sync to see so I can transfer files to and from my PC and the media card.

  The error message that I receive on the two applications, it's that I have to turn on mass storage Mode.  When I look at my memory settings:

  Compression - enabled

  Map of media Support - on

  Mass Storage Mode Support - on

  Auto enable mass storage Mode when connected - Yes

  I formatted the card successfully on the BB.

  I tried another card memory (2 GB) and also properly formatted as well.

  I also tried another USB cable into another USB port.

  I had a BB hard reset by pulling on the battery... several times.

  I had another before Blackberrys and have never had a problem of access to the media card.  I would have thought that it is easier on the 9700.

  I did search endlessly on the Web and saw other people with similar problems but many were so simple that the card is not seated properly and it also had the symptom that the BB is not recognizing the media card.  My BB recognize media cards and use them, but I can't access the card through my PC.  I understand that I may not see a pendrive pop up in Windows Explorer, but I can't understand why the BB Desktop or Media Sync cannot access.

  I know that both of these applications communicate to the BB cause I get requests for passwords and the desktop, I can view all my applications and I used to update the device until the last OS level during the troubleshooting process.

  I just wanted to see if anyone has experience this problem and has tips, if not I will contact AT & T or go into a local store to see if they can help.  I just think I'm missing something that I can take care off instead of my own.

  Thank you!

  Hello

  Have you tried to connect the device on another computer?  If another computer to recognize the device, it may just be a case of bad USB drivers on your computer.

  Here are some KB articles that may be able to help:

  KB19717 - BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer

  KB10312 - impossible to display the map of support using the BlackBerry smartphone

  You also need to remove the USB ports on your computer (using Device Manager), and then restart the computer to reload the correct drivers.

  An alternative to this is to simply use a microSD card reader which allows you to use the microSD as a flash drive.

  I hope that this info is another starting point for you!

• How can I access the internet with my Apple TV

  Is it possible to access the Internet with my Apple TV which I can do with my laptop Smart TV and my Macbook Pro?

  Do you mean to display web pages?

  If AppleTV 1-3 have thus no such ability / AppleTV 4 does not have this capability built-in, if there is an application of browser for him however, you might be in luck.

• I lost my password. I can't access my computer

  I forgot my password to access my computer.how can I change my password

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• my ex loaded my computer data on his USB stick can it access my computer from his computer?

  my not my ex husband is bitter about the divorce.  He put my computer data on a USB key, it took him several days to do this, it is geek.  I have an icon on my desktop (lower-right on bar) that says USB manager and turned the RED yesterday. the two are connected and it is able to access my computer?  I think I am spied by him through my computer and I need to take action if this is the case.

  Hello

  "He put my computer data on a USB key, it took him several days to do this, it is geek.

  It does not take many days to put your data on a USB key.

  All we can offer is that you save your data and reinstall the operating system.

  If you continue to think that it spies on you, contact your local agency.

  See you soon.

• Can't access my computer vista laptop to network!

  I have a network home, defined as follows: Vista desktop connected to the Linksys WRT54G V2 router by ethernet. Windows 7 laptop connected through WIFI; Windows XP connected by WIFI.  I'm trying to share desktop with other computers printer.  I can access the files on two laptops in my office, but I can't access the desktop of a laptop.  If I map network one laptop computers, he said that the office is there, but it won't let me access it.  The map shows a switch between the Vista desktop and the routher which I do not know what it is.  I followed all of the ideas that I can find to make sure that the permissions are correct.  Anyone have any ideas?

  Hello

  ·        What security software do you use?

  Ensure that the file and printer sharing are allowed through the firewall.

  Check that network Vista share options are correct:

  File sharing: on

  Printer sharing: on

  Password protected sharing: Off

  I suggest you follow the steps mentioned in the articles below.

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Can't access ITUNES Store with the new Windows 8, WHY

  Try to install ITunes on new windows 8, but not compatible with my iphone, ipod or can not access my library, any chance of refund for this barrage of Windows 8.

  Hello

  ITunes (http://www.apple.com/itunes/ ) 10.7 is compatible with Windows 8.
  You should make a backup of your library before installing Windows 8.
  http://support.Apple.com/kb/HT1382
  to restore after installing Windows 8.
  I can also confirm that the iphone, ipod and ipad work with iTunes in Windows 8.
  So, try to describe your problem in detail, if you want a solution.
  Carlos

• I can't access my webmail with Godaddy using Windows 8.

  Can anyone help?  The Web page expires in permanently or just revolves with the timing of goDaddy.

  Thank you

  Hi Lisa,

  Please contact Microsoft.

  I would have you look at the article-

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897#top

  Applies to Internet Explorer 10.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If the problem persists, I would have you contac Go Daddy for help.

  Check out the link-

  support.GoDaddy.com/

  Back to us for any issues related to Windows in the future. We will be happy to help you.