Can't fix the driver AHCI, Windows 7

Similar Questions

• where can I find the driver of Windows 8 for mobile phone Pantech P6030?

  Where can I find the driver of Windows 8 for mobile phone Pantech P6030?

  Currently, there is no Windows 8 driver for mobile phone Pantech Renue P6030.  However, I download pictures from a Pantech Renue by connecting the mobile phone to a computer with Windows 8.  On the phone screen a menu popped up.  I chose mass storage link that connected to the computer, File Explorer.  From there, I did some limited tasks which enabled me to copy the images on my cloud.  Not all features are on the Explorer of files to allow downloading of all the pictures, but accomplished most of the tasks I wanted to finish.

• Satellite A300D-205 - where can I find the driver AHCI and ethernet?

  Can someone give me a link or something so that I finally turn on AHCI to my laptop and be able to run already installed sp3 from WXPMCE?

  I also have an ethernet controller with an exclamation mark, that seems not to have recognized with all the drivers that I downloaded.

  Thanks in advance

  Hello!

  It is easy enough to find the drivers because you have to search only on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  The AHCI driver is in the package of display driver for this laptop.

  In addition, if you have already installed Windows XP you can enable AHCI t. This feature must be enabled in BIOS before install XP otherwise you will get only a BSOD at startup.
  So if you are looking for the AHCI mode, you must reinstall Windows XP. The drivers must be loaded after booting from the XP installation disk and pressing F6. Now you can load the drivers from a floppy external drive or you use nLite to create your own installation disc.
  In the forum is already so many threads on this use please so the forum search. This procedure returns on each notebook with SATA HDD.

  Good bye

• Where can I find the driver for Windows Vista updates?

  Where can I find updates for Windows Vista 64-bit driver?

  Where can I find updates for Windows Vista 64-bit driver?

  Hello

  You should get your software driver from your computer or hardware manufacturer, not through Windows Update (with the exception of updates from Microsoft Hardware).

  Access the site on your computer or hardware manufacturer > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  See you soon

• HP laserjet 6 p: can not find the driver for windows 10

  I installed 10 windows and now my printer is not working. It doesn't seem to be a new driver out there.

  Hello

  First of all, I would like to make it clear: I do not work for any hardware vendor or software. Your printer/scanner worked perfectly for a few years or even decades, and now it won't do nothing or very little about due to a new operating system.

  Microsoft, Apple will never say "WARNING: using this new product, your existing hardware may NOT work at all. They say that their new product blah blah will... They promise everything and then put all the misfortune, blame for hardware vendors.

  I believe that the development of new products is a lot cheaper than the technical support of the former products and each product must have a life cycle and must die loudly or quietly operating systems will kill our faster hardware. Many people simply upgrade to a love of the 'cutting edge', never know and/or research what will work the investments existing at home or not.

  Just my 2 cents.

• How can I fix the rerror on window media player codc1199 message?

  I get an error message when trying to down load something in my windows media player.

  Hello

  Other players, such as iTunes and QuickTime, have been known to corrupt some files that
  then will cause this error.

  You received the C00D1199 error message using Windows Media Player. What follows
  information to help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1199&ContextId=68&OriginalID=80040218

  Windows Media Player C00D1199 - this also applies to Vista and WMP11
  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  C00D1199 errorhttp://www.updatexp.com/c00d1199.html
  
  ---------------------------------------------------------------------------------------------

  In addition to the information contained in the link above, you should probably update the codec.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ===============================

  Determine if 32 or 64 bits.

  Start - type in the search box-> Winver find upstairs and double click on - check version

  After that the foregoing, add codec - get these 32 bit if:

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ============================================
  ============================================

  If 64-bit:

  Read this 1st and go that route, or use the one below.

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit Vista - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 8.1.7 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack 5.6.0 (64-bit) (or newer)
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  ------------------------------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I get the driver for Windows 7 software?

  Trying to find how to get to Driver software on my PC. I have Windows 7. Thank you

  Original title: software

  Moved from the community involvement Center

  If you are looking for an application named "Driver support", you're better if it has been removed from your computer.  You don't need third-party 'support' for drivers.  You should never pay for a driver update.

  In general, you need not - and should not - update drivers unless (1) you have a problem and you know a updated driver has a solution to your specific problem or (2) want or need some added functionality that is provided by an updated driver.

  If you need to replace or update a driver, you should get it (for free) on the site of the manufacturer of your computer or (if you have a custom computer or your computer manufacturer is no longer in business) from the Web site of the manufacturer of the hardware device in question.

• SFC/SCANNOW can't fix the corrupted - files windows 7

  SFC/SCANNOW finds corrupted files, but cannot fix them in Windows 7 ultimate.

  I don't have the installation disc.

  Thanks a lot for your help!

  Hi MarkmBha,

  Thank you for visiting Microsoft Community.

  According to the description of the issue scan sfc could not fix corrupted files. I suggest you to refer to the suggestions provided in the below threads and see if it helps you to solve the problem. Make sure that you follow the steps that is marked as answer.

  sfc/scannow detected some files corrupted... unable to fix... What do I do?

  Note: This thread deals with Windows Vista but also applies to Windows 7.

  Keep us.

  Kind regards

• How can I fix the window 32system and I don't have the disk to reboot

  I have an old pc xp window... when I start it upward it say window cannot start because window 32systemconf is missing or corrupted, it won't let me not in what that either... I don't have the disc and the axis of the driver is broken it doesn't hold the disc in place, if I had the drive... I really want to arriciate, if someone could help me

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• gamepad work on some games, but some don't. How to fix? where can I find the driver?

  gamepad work on some games, but some don't. How to fix? where can I find the driver? I want it to work like a xbox 360 gamepad, mines look like a playstation controller 2, its a pc gamepad heres link http://www.amazon.com/gp/product/B00IYEZUD6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 sqdeal I want to play a game called microvolts, but game do not see the gamepad even when you use the game software xpadder. S W A D do not work. How to make it work?

  Yes, thanks (NOT) to monopoly$ oft, most default games to the XBOX controllers these days.

  -There were several updates of XInput , who fixes for controllers that were compatible with

  XBOX several years ago.

  I do not exactly remember, but they are either through Windows updates 'important' updates, or

  the DirectX Web Installer, updater DX-

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  -The game should not have to recognize the controller. If the profiling software that comes

  That's all good it will emulate a keyboard.

  If the profiling software that comes with your controller cannot create a profile for the game

  which allows the stick or d - pad to function as the WSAD keys, you will need to ask at the support

  site for the mfg of the controller.

  Or, if you're lucky, here, someone can have experience with this brand controller.

  I had no problem in WSAD orders for games with my Logitech "dual action".

  the game controller software.

  I think that the new Logitech controllers, for example. - F310, identify the buttons and sticks of the same

  as an XBOX controller and can play most of the games which by default XBOX without using third-party software.

  .

• How can I fix the ati display driver

  How can I fix the display driver?

  Hello

  I thing the problem is related to Internet Explorer. Try to see (the Internet Explorer menu) if in the display menu, the Zoom is set to 100%, the text size is set to medium and style is set to the default style.

  What version of Internet Explorer you are using?

  Please post the results.

  Best regards

  Andrew

• How can I fix the link between adobe and windows if I see .pdf not win32 application

  How can I fix the link between adobe and windows if I see .pdf not win32 application, without the disc?

  "Adobe" is the name of the company that provides a great many different applications.

  Adobe Reader is free and allows you to view pdf files.

  Adobe Acrobat is expensive and allows you to create, edit and view pdf files.

  Assuming that you are referring to the reader, uninstall all the versions of it using the control panel > add or remove programs.  Then either

  1. go to http://get.adobe.com/reader/?promoid=BUIGO and download the current version (remember to uncheck the box to install McAfee Security Scan Plus.

  or

  2. go to http://www.foxitsoftware.com/Secure_PDF_Reader/ and download Foxit Reader, a small pdf reader and many more.

  Then, install the reader that you have downloaded.

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL

  Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL.

  It's sad to see how Samhrutha answer to the question in this way.

  The driver does simply not good.
  The only option to address this situation in the meantime a driver that works, disable features in ' Configure, Advanced tab "on the actual card.
  Different properties exist here. Try to enable / disable some of them. It helped for me on Win7 x 64 ASUS MB.
  Kind regards
  fundutzi

• Can't get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.

  Original title: driver HP DeskJet 5440 windows 7 32 bit

  I was unable to get the driver for 32-bit windows 7 HP DeskJet 5440 via windows update.  I also was unbale to find your compatibility Center.  Is there a link were I can down-load the driver directly from.

  Tony,

  In fact, I assumed that yours was always supported by HP * but I understand now that it's not [so I guess that it is more than 10 years because it is their general support period].  {* Mine is a DJ 2540 and is only a few years so I thought a 5440 DJ must be more recent}

  I see that HP gives you general instructions on installing drivers in http://support.hp.com/gb-en/product/hp-deskjet-5440-printer-series/445466/model/445467/document/c01796879/ I checked Microsoft update catalog service and nothing found for HP Deskjet 5440, that's why you're not having any success with the generic instructions, giving you these instructions seem to presuppose the existence of a Windows driver for this specific model.  {HP must have given up your specific model before that this catalogue has been compiled, because hardware manufacturers are those that connect to their drivers inside}

  However, my suggestions may solve your problem or maybe not.  They are simply the steps that seem more likely to be successful.  Personally, I'd a system image before you try each of these suggestions so that you can go back to square one if something goes terribly wrong.

  Suggestion 1 - go to the devices & Printers dialog box, click Add a printer, select HP then select HP Deskjet 5400 series [the sequence in the list is awkward, this entry is about 10% of the way to the bottom of the list], click on Next and follow the procedure of menus at its conclusion.  Even if it's completely successful, plan to run my Suggestion 4 below as well in case of future need.

  Suggestion 2 - out whatever the driver that shipped with your printer in the first place, try to install in compatibility mode [right click on its executable, click on the tab compatibility , the value of the check box for run this program in compatibility mode for... and select a BONE the printer worked correctly with.]  Then go to the executable, right-click and select run as administrator.  This idea is not frivolous, until he blew something internally, I was using my 1999/2000 HP Deskjet 1220C successfully on Windows 7 x 64 for four years [despite the HP user forums which implies that this was not possible].

  Suggestion 3 - go back to the HP site to http://support.hp.com/gb-en/drivers/selfservice/hp-deskjet-5440-printer-series/445466/model/445467 but select 10 Windows as your operating system.  In the results, the Diagnostics Utility Tools point contains now a setup generic [hppiw.exe] who described "HP for Windows printer setup wizard was created to help users Windows 10 download and install the software solution most appropriate for their printer and newer HP HP Windows 7 and Windows 8/8.1.   Simply run the tool and follow the on-screen instructions. " Download & run [run as Admin] of this file.

  Suggestion 4 - Connect to an Admin-level account first, then, using IE [there than IE], date back to the Microsoft update service catalog and search for HP Deskjet 5400 series.  It will give a lot of results, then click on the driver name in the left column of title to see details for each potential choice [especially if it is 32 or 64 bit].  The top of the list is [32-bit] Microsoft Update for HP Deskjet 5400 Series driver dated June 21, 2006.  [You might also download & file the second element, the 64-bit version, just in case you change computers in the future]  Add the chosen driver [s] to the "trash" then download - you will be asked to select a file to download first {it is at this stage that the process would be a break without further explanation or any error if you had not been connected to an Admin-level account before launching IE}.  I think that these drivers also work with Windows 10 thus, in the hope that your printer works for the years to come, it would be well worth your copies of maintenance of them filed there ready for your next computer use.

  Proposal 5 - go [back] to the forums of user HP Deskjets & find 5440.  See if any of the other suggestions can help you - unless you have already looked through them all the more relevant [I realize that you have been here once already as one of the threads that I just watched was of you].

  We know, in advance, which of these suggestions will lead to the best possible solution.  So please come back to this forum to explain what happened when you tried the.  Your experiences will benefit all users of HP Deskjet 5440 who come here looking for advice.

  Good luck