Solved: RV042 <>is QuickVPN

Summary: If the user account on the RV042 VPN, contains special characters (other than letters or numbers) you may not be able to connect to the RV042. The marker for this behavior will be when your password is displayed in plain text in C:\Program Files\Linksys\Linksys VPN Client\wget_error. It seems that the password field is poorly analyzed when the command line for 'wget' is created by QuickVPN. Three special characters I've initially included in my password of the VPN user account have been, #-the pound symbol! -Exclamation point /-oblique. Simply remove the special characters from the password VPN user account enabled me to connect.

I hope this information is useful to someone reading the forums. QuickVPN has so many points of failure, I am tempted to declare "not reliable." 8 ^)

The players in the circus of connection attempts are:

Client side:
MSI Wind Netbook with XP Home and customer QuickVPN 1.2.11
Cricket in wide band with Cal - Comp A600 USB Modem

Server-side:
RV042 with Firmware 1.3.12.6 - tm (May 28, 2008 17.52:01)
dyndns.org account

Dave.

Summary: Setting the MTU size to 1300 of WAN #1 (Cox broadband) and WAN #2 (Qwest DSL) allowed me to connect consistently to the RV042.

So, I no sooner opened an adult beverage to celebrate my RV042<==>QuickVPN connection above when my next attempt was a complete failure. I received the error "Check network" dreaded. The wget_request_error file showed "501 not implemented" at the request of CheckIsakmp.htm. Shit.

If I have more problems with the RV042 and QuickVPN I buy a professional solution to my VPN needs. My tolerance for this madness is done.

Dave.

Tags: Linksys Routers

Similar Questions

RV042 and QuickVPN?

I just bought a RV042 and am in the middle of the installation of a client. They have a small office with a couple of servers but they need about 10 remote engineers access to the servers. I was able to configure and get PPTP to work, but I understand that it supports up to 5 PPTP sessions. I then tried to configure the QuickVPN Client/VPN access. By the newspapers, it seems that he connects, but fail the test "ping on the remote VPN server. Here is the log of the VPN client.

2010/09/10 07:47:13 [STATUS] OS Version: Windows XP
2010/09/10 07:47:13 [STATUS] Windows Firewall is DISABLED
2010/09/10 07:47:14 [STATUS] a network interface detected with the IP 192.168.77.106
2010/09/10 07:47:14 [STATUS] connection...
2010/09/10 07:47:14 [STATUS] connection to a remote gateway with IP address: 192.168.26.55
2010/09/10 07:47:17 [STATE] remote gateway has been reached with https...
2010/09/10 07:47:17 [STATUS] commissioning...
2010/09/10 07:47:25 [STATUS] Tunnel is connected successfully.
2010/09/10 07:47:25 [STATUS] verification of network...
2010/09/10 07:47:29 [WARNING] failed to do a ping the remote VPN router!
2010/09/10 07:47:30 [WARNING] failed to do a ping the remote VPN router!
2010/09/10 07:47:31 [WARNING] failed to do a ping the remote VPN router!
2010/09/10 07:47:32 [WARNING] failed to do a ping the remote VPN router!
2010/09/10 07:47:33 [WARNING] failed to do a ping the remote VPN router!
2010/09/10 07:47:34 [WARNING] Ping has been blocked, which can be caused by an unexpected disconnection.
2010/09/10 07:47:37 [STATUS] disconnection...

What I am doing wrong. I have done some research on the web and consider it to be a common problem, but have not seen a resolution. Some believe that port 500 is blocked, but I am currently connected directly to the port of my PC WAN1. PPTP works with this configuration, but not QuickVPN.

Thank you

Do you have "Block WAN Request" in the firewall of the router settings turned off? Otherwise, please disable this option

and give QPVN to try again.

Thank you

Errors of certificate RV042 browser by connecting to the web-based GUI

I put the RV042 for QuickVPN access. The router config recommend turning on HTTPS in the firewall when using QuickVPN. The side effect of this is any web browser get me certificate errors and warns me not not to continue to connect to the router config. How can I fix this so the browser does not throw these messages?

Router Linksys brand is using the latest firmware for this material (1.3.13.02 - tm)

Hi Tim,.

The deeper issue, it's because of the certification on the cisco.com area which you do not own. And when you connect to your router probably with your own domain name or ip address that it compares this information with the information stored in the certificate. Because it will never match across is a mistake. The RV0xx series routers are not able to install 3rd party certificates, then it will not be able to resolve in their current version. I'm not aware of any decision to modify the code to solve this problem. The RV220W and SA500 series routers have the ability to install a third-party certificate. The SA is the only other model that has the ability in the line of small business to double WAN.

Cisco Small Business Support Center

Randy Manthey

CCNA, CCNA - security

Connection problem SSL QuickVPN for RV042 only through ISP specific

Hello

I noticed a frequent problem using QuickVPN to connect via a RV042. With an access provider specific (Rogers cable) occasionally for a particular location internet to the Canada QuickVPN stop to be able to connect in my work VPN (although a RV042), even if it had been fine connection before (and can often connect through the same ISP somewhere else). Although the RV042 is reached and a TCP connection is formed, the SSL connection fails and the problem persists indefinitely. If I connect to the computer (a laptop Windows Vista) to another ISP, I am able to connect properly. Restart the cable modem/router do not solve the problem. I saw once a occurring in similar problem with another ISP (DSP from Bell internet to the Canada), but in this case restart the modem/router DSL has solved the problem.

I suspect that the edge router in the ISP meets certain problems related to the delivery of SSL connection.

If anyone has experienced this problem or knows a resolution?

Thank you
Mark

The only configuration for PPTP is to activate the feature, specify the subnet, the router assigns to the logged-in user, then make a PPTP user. It is about as fast as QVPN and uses the built-in MS client.

-Tom
Please evaluate the useful messages

RV042 open ports 80 and 443 to Shields UP! When using QuickVPN

Is it possible to use QuickVPN with the RV042 without leaving ports 80 and 443 open to Shields UP great! scans? As a solution, I'm pass these ports to a non-existent IP address and forcing QuickVPN to use 60443 port. Yes, 60443 watch also opened too if I scan it, but at least it is not in the ports first 1056.

Any help much appreciated.

Router Linksys brand is using the latest firmware for this material (1.3.13.02 - tm)

Tim,

As shields up is a very good tool to run inside your network to get an idea on what ports are open. It is best to run the scan of a computer that is not behind your network. I use nmap http://nmap.org/ and scan my network from the outside to get a better idea on which ports will show open. Since Shields up is running on your computer, it will display the results based on your computers as firewall. Yes Qvpn requires 443 or 60443 to be tuned by the router to establish a connection.

Thank you

Jasbryan

RV042 and Windows 7 w / QuickVPN cannot connect

I have a RV042 are we able to access with XP using the QuickVPN client, but now we have added a laptop running 7 Home Premium 64-bit. I downloaded the most recent client (1.3.0.3), run it in compatibility mode (Windows XP, tried the SP2 and SP3), you router status indicates I'm online, but the client gets in regard to verification of network, then information windows appears which States: "the remote gateway is not responding. You want to wait? »

I also tried the VPN Client built into Windows without success, the connection failed with the error number 800.

Looking for any assistance with this. I'm sure its with Windows 7, as the XP boxes have no connection problems.

Thanks in advance for any help,

Dan

Fast VPN is not yet supported for windows 7. The 1.4.X.X release will support this and will be published shortly. Sorry, I don't have a date for this.

Linkysys RV042 QuickVPN to router problems

Hello

Any help with this issue is greatly appreciated because I was stuck on this for a few days now, it's my first time posting to a forum... I have setup VPN connections before, but only through packages such as openswan and openvpn not through this device.

My VPN router is connected directly to a DSL modem, directly behind the RV042 I placed my test on port machine 1 time Wan1 & port 1 show as Gree (active).

Modem...
DHCP enabled

local IP address: 10.1.1.1

The VPN has...

Wan1: 10.1.1.2

LAN1: 10.222.43.1

Test machine...

IP address: 10.222.43.100

I got two Linksys RV042 Setup devices such as end point / VPN connections between one local area network to another.

However before doing that I tested the installation of a test machine (for laptop Windows 7 Professional & also tried XP Professional with exactly the same results) for the VPN router device. I have configured the router with the basic configuration, as described in the guide step by step / pdf and user test configuration & a tunnel I left every thing as default and only changed what is necessary.

I generated a certificate for the server and distributed a client certificate on my customer's computer and installed in the "C:\Program Files (x 86) \Linksys\Linksys VPN Client\" directory (if I understand correctly I can simply upload to this place and its installed for the customer).

Above is a race down the steps listed in the installation guide provided on the CD, whenever I try to connect to the server, I get the following error message.
```
Failed to establish a connection.
This could be caused by one of the following:
1. Incorrect password.
2. No valid IP for the network card.
3. Incorrect server address.
4. You may need to disable your Windows firewall.
5. Local IP address conflicts with the subnet of remote VPN server.
```
1. I know that my password is correct

2. I don't know what that means 'no IP address valid for the network adapter', although I am able to access the internet via the modem on my test laptop and have access to the web interface of the RV042 so I assumed that my IP is valid?

3. I know that the address of the server is correct, I tried the two internal address of the RV042 and address the RV042 wan1

4. I get exactly the same error message if the firewall is enabled or disabled on the XP or 7 machines.

5. it's one I leave me puzzled, there is no connected computer so I don't know how there could be a conflict. However, just to make sure that I changed the IP address of the laptop outside the range allocated to the tunnel, and I still get the same error message.

I checked the "system log" server log file and that's what I get, it appears that the server actually accepts the connection between what I can make of this series of posts.
```
Jan 22 10:32:04 2010         Connection Accepted         TCP 10.222.43.100:3374->209.46.39.47:443 on ixp1

Jan 22 10:32:32 2010        Connection Accepted        ICMP type 8 code 0 10.1.1.2->10.1.1.1 on ixp1

Jan 22 10:33:44 2010         Authentication Success         HTTP Basic authentication succeeded for user: test
```
The log on the local machine, however, show that there is an error but it just says: "Failed to connect" so I am very confused about the whole issue.
```
2010/01/22 11:46:13 [STATUS]OS Version: Windows XP

2010/01/22 11:46:13 [STATUS]Windows Firewall is OFF

2010/01/22 11:46:13 [STATUS]One network interface detected with IP address 10.222.43.100

2010/01/22 11:46:13 [STATUS]Connecting...

2010/01/22 11:46:13 [STATUS]Connecting to remote gateway with IP address: 10.1.1.2

2010/01/22 11:46:14 [STATUS]Remote gateway was reached by https ...

2010/01/22 11:46:14 [STATUS]Remote gateway was reached by https ...

2010/01/22 11:46:14 [WARNING]Failed to connect!
```
Thanks for reading and thanks in advance for any help provided.

JC

As your objective here is to do a LAN to LAN VPN, I don't mind playing with the VPN client software to test the router. The VPN configuration can be pretty shakey on the rv series, and I recommend that you play with the options, just keep base.

Set up each local network be on a separate subnet. That is to say, we're on 192.168.1.x, 192.168.2.x on. On the VPN tab, set up accounts for both gateway to gateway vpn routers. Test the connection into the router admin screens. Check the connection with pings to each side of the lan systems. Then try to use applications/files that you plan to use and see if it works. If so, then success! If this is not the case, check the different options to the title of each gateway account. These options can make or break the vpn connection. Good luck.

Cisco RV042 cannot create a simple VPN?

Hello

I'm confused because I'm trying to set up a simple VPN (client of the bridge), but I can't!

A SSL VPN or an IPSEC VPN, whatever...

The RV042 firmware is up-to-date, and I try QuickVPN as a customer vpn (also updated...)

My configuration details:

I'm at the: 192.168.2.14/24

My RV042: 192.168.2.250/24

And the VPN intend to connect to: 192.168.4.x

I am currently in testing... that's why I use private IP...

Customer gateway

Add a new VPN group

	Tunnel ofgroup VPN
Group No.	1
Name of the tunnel:	VPN TEST
Interface:	WAN1WAN2
Activate:

Configuration of local groups

Type of local security group:	Range IPSubnetIP
IP address:	192.168.4.0
Subnet mask:	255.255.255.0

Remote Client installation

Remote client:	Domain Name (FQDN) Email address (USER FQDN) Client Microsoft VPN XP/2000
Domain name:	Microsoft.com

IPSec configuration

Input mode:	IKE with preshared key
Group of the phase 1 of DH:	Group 1-768 bitGroup bitGroup 2-1024 bit 5-1536
Encryption of the phase 1:	DES3DESAES-128AES-192AES-256
Authentication of the phase 1:	MD5SHA1
Phase 1 time in HIS life:	28800 seconds
Perfect Forward Secrecy:
Group of the phase 2 DH:	Group 1-768 bitGroup bitGroup 2-1024 bit 5-1536
Encryption of the phase 2:	DES3DESAES-128AES-192AES-256
Authentication of the phase 2:	MD5SHA1
Time for phase 2 of HIS life:	3600 seconds
Pre-shared key:	123456

so far, nothing fancy... Ok?

So I create my username for the test:

VPN Client Access


	User name:
	New password:
	Confirm the new password:
	Allow the change of password:	YesNo.
	Active:

	DTSInfo-online Active

The user is created and activated...

For the test, I have disabled the firewall (router + windows 7).

A dnow, when I lunch the QuickVPN client:

Then, when I have lunch:

> Connection...

> Activation of policy...

> Verification of network...

> The remote gateway is not responding. You don't want to wait? [NO]

> Disconecting from the server...

This means that, after activation of the policy, I am connected on the router (user status: active). But when he check network... I am offline!

There is the newspaper of the RV042:

dec 18 12:57:50 2012	The VPN log	description of the additional connection (qknips1)
dec 18 12:57:50 2012	The VPN log	listen to IKE messages
dec 18 12:57:50 2012	The VPN log	forget the secrets
dec 18 12:57:50 2012	The VPN log	loading of the secrets of ' / etc/ipsec.d/ipsec.secrets'
18 12:57:57 dec 2012	The VPN log	(qknips1): removal of connection

If I'm signed for 7 seconds... Why?

Can someone help me?

When I try with the built-in Windows VPN client, newspapers are filled just more... ^ ^

Help! hour

Thanks (and sorry for my bad English ^ ^)

Hello

Please use our forum

Hi Skip my name is Johnnatan and I'm part of the community of support to small businesses. I ve seen your post and I see you are using Windows 7 and that you disable your firewall to test your connection. A configuration of the computer and the router must be in order to solve your problem.

Computer

As you use Windows 7, you must enable the Windows Firewall and create 2 rules, also make sure that Ipsec communication is allowed, you can follow these steps:

http://www6.nohold.NET/CiscoSB/Loginr.aspx?login=1&PID=2&app=search&VW=1&articleid=2922

Router:

Go firewall > basic settings and

Disable: Block WAN request

Enable: Remote Management

Go to VPN > VPN Passthrough and make sure everything is activate.

I hope that you will find this answer useful, if it was satisfactory to you, please indicate the question as answer. Please note post you consider useful.

Greetings,

Johnnatan Rodriguez Miranda.

Support of Cisco network engineer.

QuickVPN - could not do a ping the remote VPN router!

Hello

I have a RV042 (VPN router) and I have some problems to run properly using the QuickVPN client.

Here is the Log of the QuickVPN client.

2008-10-15 20:14:38 [STATUS] a network interface detected with 192.168.0.104 IP address
2008-10-15 20:14:38 [STATUS] connection...
2008-10-15 20:14:38 [STATUS] connection to a remote gateway with IP address: 96.20.174.84
2008-10-15 20:14:38 [WARNING] server certificate does not exist on your local computer.
2008-10-15 20:14:44 remote gateway [STATE] has been reached with https...
2008-10-15 20:14:44 [STATUS] commissioning...
2008-10-15 20:14:51 [STATUS] Tunnel is connected successfully.
2008-10-15 20:14:51 [STATUS] verification of network...
2008-10-15 20:14:55 [WARNING] failed to do a ping the remote VPN router!
2008-10-15 20:14:58 [WARNING] failed to do a ping the remote VPN router!
2008-10-15 20:15:01 [WARNING] failed to do a ping the remote VPN router!
2008-10-15 20:15:05 [WARNING] failed to do a ping the remote VPN router!
2008-10-15 20:15:08 [WARNING] failed to do a ping the remote VPN router!
2008-10-15 20:15:11 [WARNING] Ping has been blocked, which can be caused by an unexpected disconnection.
2008-10-15 20:15:19 [STATUS] disconnection...
2008-10-15 20:15:25 [STATUS] Tunnel is disconnected successfully.

I don't know how it is implemented, but if WuickVPN wait a form ping my router, it will not happen. I was never able to ping my router ouside of my ISP network.

There is a way to disable the Ping process and continue with the VPN connection?

QuickVPN try ping on the router via the VPN tunnel to check the connection. It should work without worrying about whether your ISP filters ICMP messages or not. The tunnel is encrypted your ISP won't know what you're doing.

Please post the corresponding on the RV042 VPN log. That is expected to see how far you get.

You have a firewall running on the computer? I think that some firewalls have difficulty with the traffic of ESP.

What is the router that is connected to the computer? How is it that is configured?

RV042/RV042 file sharing

Cannot access shares on the remote computer. Mapping remote West works digitized NAS. Ping works. Print shops. JuUST impossible access shares via: \\10.10.197.2\sharename RV042 Firmware Version: 1.3.12.19 - tm of advice?

Thank you, but I can write a few pages of queries on how to Word a question on this help page for Cisco. In fact, I solved the problem by activating "Netlogon Service" on the machine, on that the shares have been. (Vista) If you go to the Windows Firewall setting, change parameters, exceptions, make sure that the Netlogon service is checked. I unchecked, share disappeared, checked, managed to reconnect. Thanks for everyone to research.

RV042 stopped working

Hello

I have the following problem:

My rv042 stopped working after about two weeks. The configuration looks like this:

Belkin Wireless Pre - N in bridge to port 1 mode

-RV042 1 computer connected to port 2

-Cable modem Internet

-DSL Modem in bridge of dmz mode

* The router works with the embedded firmware, it's never been flashed.

Everything worked very well for about two weeks and then suddenly stopped working. I used the system in time. Things just disappeared. I tried the following:

* manually Computer Configuration to an IP address on the network instead of DHCP

-No connectivity. Failed to contact the router at all. Cannot ping it.

* Power/disconnect router and wait 1 hour before feeding this back.

-No connectivity. Failed to contact the router at all. Cannot ping it.

Perform a reset of the modem

-No connectivity.

* Perform the reset of the modem. Reconfigure the computer.

-No connectivity.

* I tried with several computers.

* I can connect the computer directly to a cable modem and internet access. Cable/internet is so direct.

* When computers are not assigned an IP address in DHCP mode. Running "ipconfig / renew" cmd prompt fails with timeout.

* When configured manually, I cannot ping the router on 192.168.1.1

* No warning on the router light. All the lights seem to be good. When it is connected to the Lan 1 and Lan 2 lights flash constantly to any interval of 1 second.

Can anyone think of anything to try with this?

Thank you. I managed to solve this problem by taking the following steps (found on another post here):

(1) turn off all computers, the router and the modem and disconnect from the wall.
(2) disconnect all the wires of the router.
(3) turn on the router and let it start up completely (1-2 minutes).
(4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
(5) turn the router.
(6) connect a computer cable to port 1 of the router (NOT to the internet port).
(7) turn on the router and let it start up completely (1-2 minutes).
(8) the power of the computer (if the computer has a wireless card, make sure it's off).
(9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
(10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

(11) reload saved config.

(12) connect 1 modem at the same time and make sure they connect to the routers statuspage.

(13) connect one computer at a time until all are connected.

I never found a cause of this accident. I turned more connection on the router in the hope I can find a cause if it happens again. I hope this answer will help others.

backup smart link does not not in RV042

I'm in the mess I have configured RV042 in backup of secruit BI (primary/secondary links), but the question is when primary folds secondary does not gets to the top. for this I hv to remove manually main link only the cable then secondary stand... Vica-versa.

I bought this router for auto backups but if I hv to display manually the same I was mistaken.

is thr any soluton for that.

NET detection, I chose the HOST ip. that is my server ip address.

Pls help me guys. I can provide more details if necessary.

Hi, paritly problem solved when smone told me to delete connection in Setup...

RV042 dual wan port forwarding challenge

I have the latest firmware for this router. Here's what I want to do.

WAN1 is connected to our primary ISP and has a static IP address. We pass a bunch of ports to our SBS 2003 for VPN server and the purpose of remote desktop. Redirect us P - FTP and FTP ports to another computer on the domain to use as FTP server, and we have access to this computer directly from our office as a mapped drive.

WAN2 is connected to our secondary ISP that has a static IP address. I want to forward ports 80 and 443 of this connection to our FTP server (which has the internal IP address of 192.168.1.21) as well for this same computer can host our project Web site without needing us to get another computer that we would have to have in the office.

This doesn't seem to be easily possible with the RV042. I am open to any suggestions on how I can do that; I have another router I could throw into the mix if that would solve the problem.

In fact, there to make a NAT on a public IP address to match an internal IP address of your choice. I used the static IP address of the second internet connection and mapped it to our FTP server.

The only downside is that the FTP server is no longer protected by the firewall, so I had to install a software firewall to protect it from the outside world ;-)

Linksys rv042 http access port

How do I change from port, allowing to connect my on RV042 router admin panel?

I need to translate the port 80 to the intranet address and connect to the RV042 using something like 192.168.0.1:8080 or any other port.

Sorry for mistakes, I'm not very good in English.

Translation of port 80 to the server on the local network works, server available from his name and his router available to port 8080.

Solved.

Complete tunnel Config RV042

I followed the laboratory (https://supportforums.cisco.com/docs/DOC-12534#comment-13921) to set up a tunnel from gateway to gateway using RV042 version v4.1.1.01 - sp at both ends. It seemes to work, however communication seems to be limited to one way. I can ping and use remote desktop to connect to the servers to the central location, but trying to make a ping or RDP servers to the branch Traghetti that I get nothing.

I'm guessing this has to do with the configuration of multiple subnet. Following your instuctions I end up with the same IP configured on both routers and I end up with a loop of routing to the central office. Do you know a way to solve this problem?

Could you try to remove the static route on the central site?

If it still does not work, contact the support center for assistance.

Solved: RV042 <>is QuickVPN

Similar Questions

Maybe you are looking for