Cannot access custom added directory

Similar Questions

• FATAL ERROR: Cannot access the temporary directory for remote package "detached.pkl".

  have already run antivirus

  already uninstalled and re-installed the app, I wish to run (even used revounistaller and other programs to ensure that all this)

  have already removed all the components of the registry associated with this application, I want to make it work with some programs

  In my view, it is over 2 years old, but I just had the same ERROR FATAL happen on my departure upward and found that a power cable to one of my extra hard drives has been disconnected. I was redirecting my temporary files to a G: drive to save space on my SSD boot drive. After that I reconnected it to power, everything was good.

• PIX501 customer VPN - cannot access inside the network with VPN Session

  What follows is based on the config on the attached link:

  http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a008009442e.shtml

  PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC

  We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.

  Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!

  We have the same problem with the customer 4.0.3(c)

  Thanks in advance for any help!

  =======================================

  AKCPIX00 # sh run

  : Saved

  :

  6.2 (3) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  hostname AKCPIX00

  domain.com domain name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  fixup protocol sip udp 5060

  names of

  access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

  pager lines 24

  interface ethernet0 10baset

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  external IP address #. #. #. # 255.255.240.0

  IP address inside 192.168.1.5 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool akcpool 10.0.0.1 - 10.0.0.10

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address akcpool pool akcgroup

  vpngroup dns 192.168.1.10 Server akcgroup

  vpngroup akcgroup by default-domain domain.com

  vpngroup split tunnel 101 akcgroup

  vpngroup idle 1800 akcgroup-time

  vpngroup password akcgroup *.

  vpngroup idle 1800 akc-time

  Telnet timeout 5

  SSH #. #. #. # 255.255.255.255 outside

  SSH timeout 15

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd dns 192.168.1.10

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:XXXXX

  : end

  AKCPIX00 #.

  Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:

  mymap outside crypto map interface

  ISAKMP allows outside

  Enter these two commands should be enough to reset the ipsec and isakmp.

• Zune and Windows 8 "error reading the Zune software cannot access important data on your Zune." Try to disconnect and reconnect it. If the problem persists, contact customer support. "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  Message error "the Zune software cannot access important data on your Zune.

• Since the upgrade to you Bird 45.5.1am cannot access the calendar. Don't have re-installed lightning but no tabs or menu items added. Have restarted you bird & PC reboot.

  Since the last update to Thunderbird 45.5.1 cannot access the calendar (where I hope to recover all my appointment with the doctor for 2017). Have reinstalled Lightning (then restarted you bird, & also tried a reboot of the PC) and although if I have Add-ons Manager access it allows me to disable or remove 4.7.4 Lightning there is no way to access the calendar - there are no tabs, menus or extra sidebars. Also tried different keyboard shortcuts, F11, ctrl-shift-C that does not receive me in two. Any help would be appreciated / thank you

  Resolved in the clear light of day and with my newly saved profile, I used the delete option in the Add-ons Manager to uninstall the lightning. After the reboot of you bird I have re-ran then install Lightning of the Add-ons Manager. That worked and found my old calendar events as well - if all is good now.

  Hope this info helps someone else who has the same problem.

• Cannot access shared files whne connected to the server

  Original title: dfs namespace access

  We have customers from windows 7 on windows 2008r2 domain. We have a couple of file hosting a dfs servers space names with file shares.

  This server hosts a common \\namespace\fileshare that is still available however 2 other \\namespace\share1 & 2 return cannot access this share when you are not connected to the server. This does not affect any clients, but affects enough that it becomes big problem being the only customer resolution of reconstruction. I tried adding and removing updates. I am at a loss what to try next.

  Any suggestion would be great.

  Thanks Mick

  I found the solution myself after a lot of googling and journal of trace events.

  After you configure wsus, it appeared that our Windows 7 clients suddenly received file sync (small green icon in the taskbar) couple this with an intermittent slow wan link. The fix was all right before you disable offline files. We never wanted their first place very frustrating, but we're still learning.

  It doesn't seem to affect all clients which is what got us thrown away but hey its works now.

  Thanks Mick

• The VPN Clients cannot access any internal address

  Without a doubt need help from an expert on this one...

  Attempting to define a client access on an ASA 5520 VPN that was used only as a

  Firewall so far. The ASA has been recently updated to Version 7.2 (4).

  Problem: Once connected, VPN client cannot access anything whatsoever. Client VPN cannot

  ping any address on internal networks, or even the inside interface of the ASA.

  (I hope) Relevant details:

  (1) the tunnel seems to be upward. Customers are the authenticated by the SAA and

  are able to connect.

  (2) by many other related posts, I ran a ' sh crypto ipsec her "to see the output: it

  appears that the packets are décapsulés and decrypted, but NOT encapsulated or

  encrypted (see the output of "sh crypto ipsec his ' home).

  (3) by the other related posts, we've added commands associated with inversion of NAT (crypto

  ISAKMP nat-traversal 20

  crypto ISAKMP ipsec-over-port tcp 10000). These were in fact absent from our

  Configuration.

  (4) we tried encapsulation TCP and UDP encapsulation with experimental client

  profiles: same result in both cases.

  (5) if I (attempt) ping to an internal IP address of the connected customer, the

  real-time log entries ASA show the installation and dismantling of the ICMP requests to the

  the inner target customer.

  (6) the capture of packets to the internal address (one that we try to do a ping of the)

  VPN client) shows that the ICMP request has been received and answered. (See attachment

  shooting).

  (7) our goal is to create about 10 VPN client of different profiles, each with

  different combinations of access to the internal VLAN or DMZ VLAN. We do not have

  preferences for the type of encryption or method, as long as it is safe and it works: that

  said, do not hesitate to recommend a different approach altogether.

  We have tried everything we can think of, so any help or advice would be greatly

  Sanitized the ASA configuration is also attached.

  appreciated!

  Thank you!

  It should be the last step :)

  on 6509

  IP route 172.16.100.0 255.255.255.0 172.16.20.2

  and ASA

  no road inside 172.16.40.0 255.255.255.0 172.16.20.2

• When you try to selectIndex results in #1009: cannot access a property or method of a null object reference.

  I have a custom component that contains a list control. It has a data provider is a collection ArrayCollection from a web service.
  
  When a user adds a new item to this list, I want to roll to the index of the added item and highlight it.
  
  When I do this my mxml file I get
  
  #1009: cannot access a property or a method of a null object reference.
  
  Here is the code that produces the error: (navigator is the id of the custom component)
  
  currJob.jobComponents = ArrayCollection (ev.result);
  navigator.componentList = currJob.jobComponents; data provider for the list control being defined with the results of the Web Service call
  navigator.compList.selectedIndex = currJob.jobComponents.length - 1; This is the code that generates the error.
  
  Help!
  Thank you

  FIX: List is an accordion. I changed the creationpolicy for the accordion to "EVERYONE" and the reference to the work of control (list).

• Facebook cannot access the photo library

  When I try (on a Macbook Pro) 'create album' or 'add photos' on the women's FB page, I can see, but cannot access its photo library.  Why?  I can, however, access the photos directory - unfortunately, uses Photo pictures are not stored there.   Apple told me that they no longer support iPhoto, but were instead switching to 'Photos '.  So that's where all the images are imported from the camera.  WTH?  It shouldn't be this difficult.

  When you use a web browser or any other application that uses the media browser, you can access your own library of Photos of system, but not of other libraries of Photos.  Only libraries can be designated as the library of the system at the same time.

  The photo library of the system will be available from the sidebar of the selector Panel of file like this:

  

• Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836

  Hi, I just upgraded to 6.4.2 to 6.5.0

  Before I reboot:

  Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.

  I could see my SIN in Solution Explorer and browse the files.

  I rebooted and now it is happening:

  I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.

  I ping the Ip and get an immediate response.

  I found some indications that I should be able to connect in SSH with putty, but it does not work for me.

  The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.

  Don't know what I can do at this point...

  We have tried to reinstall OS and nothing has changed.

  We have tried to unplug an ethernet, nothing has changed.

  The question has been reassigned to lvl 3. They came into tech mode.

  They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.

  I put the HARD drive bad and resynchronization.

  hope this helps someone else.

  PS, The Netgear Customer Service is good and fast - recommended!

• Lenovo program - T420 cannot access camera settings

  I have a T420 and cannot access my camera, because I've upgraded to windows 10 and keep to said that I need the program setting of Lenovo, I found, but when I click on get the app, I find myself with just a white screen... I tried several sites and get the same thing... Any ideas on how to get the settings program

  Moderator edit: added detail to the subject

  Hi Cyprusbob and welcome to the Lenovo user community!

  You have a ThinkPad parameters dependency installed?

  http://support.Lenovo.com/us/en/downloads/ds104935

  If you do not ' yet fact, take a look at the support page the T420 and make sure you have installed the latest Windows 10 drivers, or run ThinkVantage System Update.

  I hope this helps!

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• Cannot access my DVD-CD in my computer

  Original title; DVD - Rw disc

  When I insert a cd it plays ok automatically. However if I open 'Computer' and try to access the information on the disk by clicking on the player it does not. Initially, I got a response. "Windows cannot access the specific device, a file, or a path. You can not have appropriate permission to access the item "." I ran the restore to an earlier date of restoration. Now, when I try to access the disc in the drive, I get the answer. "application not found".  If I right click on the drive I get the options and if I press 'Open' the tracks of the disc are displayed. I recently loaded software MP3 "Philips Songbird" on my system, but being not not happy with it I uninstalled it. I also uninstalled "itunes" & "icloud. Will be this cause any kind of problem? I have re-installed "itunes."  Can anyone help?  Faulkner W

  Hello

  ·         What operating system is installed on your computer?

  ·         Have you tried to play different CD/DVD?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race he difficulty of the link and check if the problem persists:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/314060

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• I cannot access the application "contact me" when a website, get error "Default Mail Client not properly installed."

  I cannot access the application 'contact me' when a web site and receive the answer "Default Mail Client not properly installed" instead of going on the requested site.

  How can I fix this problem?

  Separated from the:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/IE8-default-mail-client-not-properly-installed/23c2a9e1-d1fa-4a50-aeb1-90a6f2af717f

  CrystalBall © SEZ...

  Unlike Windows XP & Vista, Windows 7 does not include a default email Client. [What were thinking?]

  You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In these forums, you will find support for Windows Live Mail: http://windowslivehelp.com/forums.aspx?productid=15

• 8 computer is a mess... running XP WP 7 - cannot access tools, many mistakes see the cigarette... What can I do? cannot afford the new computer.

  8 computer is a mess... I am running Windows XP seven.

  Cannot access tools, show many errors, see the following issues...
  ERROR CODE 0 X 80070715
  ERROR CODE FOR INSTALLING WINDOWS DEFENDER
  HTTP ERRORS - directory 404 not found
  SCRIPTS - you run Scripts (gives an explanation by saying "If you continue to run scripts, that can compromise your computer")
  -the choice to continue running scripts or stop script execution...
  WEBPAGE SCRIPT ERRORS
  PUBLISHER 2010 does not run or act as it did when first installed...

  Then... I get...

  TO BLOCK OR UNBLOCK A PUBLISHER

  Internet Explorer allows you to block or allow downloadable software publishers. The Publisher is identified by the digital signature applied to the file that is downloaded. If the file is not signed, changing these settings will have no effect. For more information about digital signatures and certificates, click related topics.

  To block an editor

  If a file is downloaded to your computer, you will see a security warning dialog box. If it has a button more options , you have the possibility of preventing the download more software on your computer of this editor.

  1. In the security warning message, click more options.
  2. Click never install the software of the name of the Publisher.

  As you can see... I need to go to the 'TOOLS' to change anything on my computer... not able to access the 'TOOLS '.

  To assign an Web site to a Security - Zone could not be opened for this...

  Can someone help me with a single blow to properly operate my computer? Impossible to buy a new laptop because without finance.

  Laid off in March 2013 and need this laptop to find and apply for a new job.

  Thank you very much, Mr. VMW
  

  ... Can someone help me with a single blow to properly operate my computer?

  If this is the result of infection by the virus scanner Malwarebytes on the machine.

  Also:
  How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP

  John