Cannot access my wifi using an external keyboard... Help...

Similar Questions

• using an external keyboard midi recording

  Hi, im relatively new to this software and vsti plugins. I wonder if I can use an external keyboard to trigger midi sounds using the plugin vsti in audition. the keyboard that I use is quite ugly and not expensive keyboard (YAMAHA PortaSound PSS-50), but I use this to test the functions of vsti on hearing before buying a better keyboard.

  After I plugged the keyboard of my computer using audio jacks, I went to the multitrack interface on hearing. Then I clicked on midi track insert. Then I clicked on the button red "L" and then clicked on sequencer. Sequencer, in the upper right corner, I have no midi device to select from and I chose the 3 plugins vsti provided by adobe. What can I do to use the external keyboard to play sounds?

  And is it possible to explain the concept of plugins VSTi midi sounds? Any response will be greatly appreciated!

  The first thing you must connect your keyboard to the computer using MIDI cables, not audio.  (Has PSS-50 taken lunch?  I think not enough.  If so, you cannot use it in any VSTi in all control program).  If the keyboard has not taken MIDI, you certainly need to connect to your PC via some sort of MIDI interface, which converts the MIDI plugs DIN 5 pin USB

  Second, once you've done a MIDI connection between the keyboard and the hearing, created a MIDI, go in the sequencer track (if you have not already done so AA then sweeps the VSTi installed on your computer).  Once the operation is finished the sequencer window open fully.  On the left hand side, you must select your choice (drop-down) VSTi.  Immediately below it is a second drop-down list, where you say AA which of the 16 MIDI channels, it should meet.  If you are just "experimenting" is fine.

  You mention that you went in the Display Preferences of the top right; If you have made connections correctly between the keyboard and the PC, the keyboard is listed here, and you will need to select it by clicking on the button next to its name.

  I don't think that you need no matter what detail more than that at the moment. We must establish definitely if your keyboard can produce MIDI data; If it can't do anything that you can do without a 'best '.

  Post back with your "discoveries".

  Jeff

  EDIT: just checked and confirmed, PSS - 50 does NOT catch MIDI so does not do what you want.

• Cannot access my screen to touch a keyboard during a call

  Recently my iPhone I cannot access my phone's keypad so that on the phone.  For example, I got a service call for my camera this morning and the robo confirm the appt call of said press any number of keyboard to confirm and I couldn't access the keypad (keypad) to confirm.  The screen was black.  I just kept touching the screen until it appeared.  What is going on?

  Hi there SilverBear,

  Looks like you are trying to get to the keyboard after you have started a call but the screen remains black and won't return to the options on the screen. This may indicate a problem with the proximity sensor, or with the software on the phone. I would start by stop the phone and settings on the phone applications:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
   
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
   
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.

  Now, if none of this works, then I would say that there is a problem with the sensor and setting up service for her:

  Repair - iPhone other repairs

  Thank you for using communities of Apple Support.

• Using the external keyboard with keyboard internal

  Hi people,

  Just got my new Tecra S4-122, of course without a built-in numeric keypad, so I have such a thing too. The problem now is that I'm not able to use the numbers on the keyboard without having to activate the internal "keyboard" (letters using normal numbers), is not really useful, because I can't use it during the strike. Is there a solution to activate ONLY the external keyboard (Labtec thing on USB)?

  Thanks in advance!

  Best regards
  PhIP

  Hello

  Unfortunately, it s seems there is not other way to allow the keyboard with FN + F11.

  Best regards
  Jimi

• Laptop keyboard settings changed using the external keyboard

  Friends,

  I have a laptop of Lenovo 410. Recently, I bought an external keyboard (wireless). Changed everything using the keyboard of the post office, laptop keyboard configurations (if I press a letter, he would type another) .is it possible to understand that how it would have been changed. It would be a great help if you can guide me. Because of this problem, I am not able to connect.

  Thank you & best regards

  Aissa

  
  

• Cannot access Smart WiFi in cascade mode

  I have the following Setup.

  My modem ADSL ISP is the main router with DHCP and its address is 10.0.0.138 who, for some reason, I can't change.

  I booked 10.0.0.1 for my EA2700.

  My EA2700 Port 1 is connected to my wireless Internet service provider router Port 1 creating a way of editing cascading of Lan-To-Lan.

  DHCP and NAT is disabled on EA2700.

  Both channels WiFi (2.4 GHz and 5 GHz) is defined with the same name and password so devices can connect to one of the routers and it works fine.

  The only problem is that I can not connect to https://www.linksyssmartwifi.com.

  When I connect to https://10.0.0.1 I can connect to my EA2700, but I get error 2113.

  Ignoring the error, everything works.

  I tried DMZ of 10.0.0.1 on my main router but it does not help.

  When a router WiFi chip is cascaded Lan to Lan you cannot remote access via WiFi Smart services.

• Cannot access files by using Sharepoint where the permission has been set to allow access. Other members of the group are able to access these files.

  Downloaded Sharepoint, working on a group project, but cannot access shared documents.  a lock icon appears to the right of the url of the sp, accredited certificate.

  You need to ask in a forum of Sharepoint.

• I have a problem, try to uninstall the ask toolbar. get the error message: cannot access the VB script... need help please

  I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help

  Hello

  How do you try to uninstall the toolbar?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  How to fix script errors in Internet Explorer on Windows computers:

  http://support.Microsoft.com/kb/308260

  Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521

  Method 2:

  Try to uninstall the toolbar, programs and features and check if it helps.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope the information is useful.

• Cannot access the network using WiFi hotspot

  I have a lenovo ideapad z570 running windows 7 ultimate, processor intel pentium cpu B950 @2.10 GHZ 2 GB ram and 64-bit operating system. My problem is that when I create a wifi hotspot via intel my wifi technology, I so can not access the network on my android phone or the playstation 3. There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Original title: network
  

  There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Hello

  You try to use the Add-hock network so that you can access ac in android are as good as play station unit
  Like you would have checked in the id network properties material and device id, it yellow list means problem with driver, please try to update the BIOS and the driver appropriate with the hardware ID, if possible to install from the laptop power management

  IdeaPad Z570.please press fn + f5 and check the layout state of WIFI is turned on, current state should off
  Download these drivers and install it, then try again
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1WLN90WW5.exe

  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z370Z470/IN8STW09WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1MEI08WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1CHP30WW5.exe

• Cannot access 250 GB Toshiba USB external hard drive

  Hello

  I'm unable to access my 250 GB USB hard drive. It gives an error that it detects hardware & gives a pop for Cypress AT2LP RC58 driver & research updates on internet & then error is "cannot install the hardware, the hardware was not installed because the wizard did not find the necessary software."

  Any help will be much appreciated.
  Please let me know for any info.
  Thank you very much!!!
  Concerning
  Harish S

  Hello

  Seems that the external HARD disk drive cannot be recognized because of the driver problem.
  What you could do to disconnect the USB of ALL devices and open Device Manager.
  Then choose the display command, show hidden devices and uninstall all devices under USB controllers. Reboot the laptop.
  After restarting again the operating system must install USB drivers again and you could test whether the external HARD drive can be connected as well.

  I have goggled a bit and found a few interesting statement abut Cypress AT2LP RC58. It seems that the HARD drive is ok but sometimes the HARD drive cover and the interface connector would be malfunctions and so this problem would happen.

  But these are only suggestions if you want to try for Cypress AT2LP RC58 goggle and see for yourself.

  Best regards

• RV320 VPN cannot access peripheral LAN using iPad

  With the help of RV320, firmware 1.1.1.06

  LAN 192.168.1.x 255.255.255.0

  VPN 192.168.09.100 to 192.168.09.150

  I need to access a device on the local network using this VPN connection from iPad. The Unit received address DHCP on LAN, broadcasts its presence every second on the Port 4992.

  When it is on the LAN, the iPAD sees the presence of broadcasting and accesses the device without problem. When I VPN in, easy VPN works well. I configured the firewall of the router as the rules:

  Allow

  All traffic [1]

  LAN

  192.168.9.100 ~ 192.168.9.150

  192.168.1.1 ~ 192.168.1.255

  Always

  Allow

  All traffic [1]

  LAN

  192.168.1.1 ~ 192.168.1.255

  192.168.9.100 ~ 192.168.9.150

  Alway

  If I first connect to the device when the iPad is on the local network, I turn off WiFi and connect through the VPN, I can continue to control the device. However, if I'm not connected to the device locally first, I see the presence broadcast on port 4992 when it connects first via the VPN. Broadcasting does not reach the iPad from a 192.168.1.x device connected 192.168.9.x.

  What is the correct way for the iPad on the 192.168.9.x, see the dissemination of 192.168.1.x?

  Hello

  Broadcasts will not be sent on the VPN tunnel.  The only traffic that will pass from the LAN to your customer's traffic specifically aimed at it, otherwise the router send him outside.  Looks like your presence Pack is a show, so all VPN clients won't be able to see.

  I think that when you connect locally you are picking up on the broadcast and then when you go to the VPN that has not passed yet, so why does it work if you connect locally first.

  Hope that helps a little,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• HP Pavilion 15-n270sa: cannot turn on WiFI using as supposed to action on HP Pavilion keys

  Hello

  I recently downgraded my laptop for Windows 7 Pro Windows 8.1 because of problems with internet. When you have completed the installation I was not able to use my work as supposed to keys when I need to turn on my WiFi Fn + f12 keys. The drivers Ethernet and network are yellow and because I couldn't get my WiFi I tried the wireless adapter.

  There are two problems here:

  1. Action keys does not anyway if I deactivate or activate them via the BIOS
  2. No Ethernet and network drivers and they is not found on the computer or online.

  Hope to hear something soon.

  Kind regards.

  I have to say that I tried the drivers on this site and unfortunately, they do not work but my friend and I found a solution for this.

  I downloaded Driver Booster 2.2 and scanned my laptop with it who found and installed all necessary drivers. After installing all the drivers he saw my wifi but is not connected, but everything had to be done, it was just close and on the router and restart the laptop.

  Thank you.

• Cannot access files after using recovery system (vista)

  Recently, I had some problems with the computer and had to consider having a new video put card in and done a system recovery.  I saved all the photos, documents, music, etc. on discs and did the work.  When I got the computer home, I loaded the discs on the computer and appears on the desktop a shortcut to a system recovery.  Unfortuantely, I'm unable to access all of the files.  I get an error of media player, my photos, say, I don't have permission to open, my documents will not be open.  I am the only user on this computer.  I am admin on it.  I have no idea how to make files to open and I really need to get them into a large number of them that relates to the work.  What should I do?

  Hi GypsyMama,

  You may need to take ownership of the files, and then try to open them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot access the internet using the account invited in Vista. Unable to access using the administrator account.

  This one is strange - and I repeat that the problem is that I can't access the internet by using the administrator account.  The guest account works fine.  All programs are there and launch the fine (IE, Live Messenger, Yahoo Messenger, etc.), but they cling right there when I try to log on or access to any Web site.

  While in the administrator account, I ran "CMD" in the run menu and can ping Yahoo, Google, etc. with success.  It's embarrassing - any ideas how the administrator account can act that way then the guest account works perfectly?

  Hello Allen LaBrune,.

  If you are able to ping the websites from the command prompt, it means that your computer connectivity is fine.

  ·         What is the antivirus installed on your computer protection software?

  ·         Have you tried to browse by disabling the firewall?

  Try disabling the firewall on the computer and check if you are able to navigate.

  If this does not work, reset Internet Explorer settings and check if you can browse.

  To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

  1. exit all programs, including Internet Explorer (if it is running). 2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER: Inetcpl.cpl The Internet Options dialog box appears. 3. click on the Advanced tab. 4. Under Reset Internet Explorer settings, click Reset. Then click again on reset. 5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog. 6. restart Internet Explorer. For you reference, you can visit the link for the following Article: http://support.Microsoft.com/kb/923737

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A660 - cannot install Win 7 using the external DVD drive

  Hello!

  Not so long I asked help to reinstall win 7 on my laptop.
  The only option was actually in the restoration of order dvd what I did. Today, it has arrived.

  Problem is, or was that some of the CD or the DVD couldn't be read for some reason any.

  Now it won't boot from the cd, it says faulty hard drives.

  So what I did I have pluged my detached external DVD drive and it started from that.

  But just after a few seconds, she told me to '1 support recovery' and open the drive in the laptop. Tried to insert the disc - nothing, like its not inserted, tried to disable computers portable cd - nothing please help

  Hello

  You should first check if the external CD/DVD drive is recognized as a boot device.
  Connect the external USB CD/DVD drive and switch on the device.
  Press F12.

  Now, you will see all bootable devices. Generally, the CD/DVD USB drive should appear if his support. If it does not appear, you will not be able to boot from the external USB CD/DVD drive.

  In this case I recommend you to create a bootable USB flash memory and install Windows 7 from USB flash memory