Cannot add 10 Coldfusion as a local server to Coldfusion Builder 2

Similar Questions

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Cannot install the ColdFusion Builder 2 fix

  I'm trying to install ColdFusion Builder 2 Hot Fix. At the launch of the InstallAnywhere program I get this message: cannot run the desired program. Please get another copy of the installer and try again. "Does anyone have a solution?

  Can you please rename the following Setup program, and then try to install?

  Adobe ColdFusion Builder 2 fix 1.exe

  Thank you

  Krishna

• Cannot add free license to the ESXi Server

  I have an ESXi host 4.1 I can't add my license key for free also.  I installed this on 8 other identical servers, but this one gives me the penalty.

  If I go to configuration > license I see the following:

  Product: Assessment 1 host peer Mode
  License key: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
  Expires: expired

  Product features:
  Up to 8 - way virtual SMP
  for ESX Server vCenter agent
  vStorage API
  VMsafe
  dvFilter
  VMware HA
  HW hot pluggable virtual
  vMotion
  VMware FT
  Data recovery
  vShield Zones
  VMware DRS
  Storage vMotion
  MPIO / third-party Multi-Pathing
  vNetwork Distributed Switch
  Profiles of the host
  Remote virtual serial Port concentrator
  Storage i/o control
  dpvmotion
  Vaai

  The strange thing is that the button "Edit" in the upper right is grey.  It is not a link on which I can click.  What I am doing wrong?

  Yes.  See, http://kb.vmware.com/kb/1003490

• Firefox cannot connect to a local server subdomain if no available network connection.

  Hello

  I have a laptop that is configured as a local server using Apache. On this, I use "localhost" as the domain and have several subdomains.
  Now, if I have no network connection (to any other device) available on this laptop, and then with Firefox I am only able to access the domain 'localhost', but none of the subdomains and get a "Server not found" error on these. If I have a network connection, I can access the domain and subdomains with no problems.

  What it could be and what can I do to make it work without a network connection?
  I also tried with Opera and Chrome, and they can access subdomains anyway.
  Unfortunately however I prefer Firefox, then Yes... I am here.

  Kind regards
  Song

  Troubleshoot you your network connection in the Options menu? Firefox cannot load websites but other browsers may

  If internet not configured correctly, you may have a firewall set in place? http://www.aboutdebian.com/network.htm is what I used as a reference.

• In MS SQL Server Management Studio, cannot add a port to the Windows Firewall exceptions list.

  I am trying to debug a sql script in the debugger to MS SQL Server 2008 and I received a message saying 'could not configure the Windows Firewall. Cannot add a port to the Windows Firewall exceptions list. "Use the Panle controls to manually configure Windows Firewall.

  Hi GusGomez,

  The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
   
  Hope this information helps.

• Cannot add a printer. Print spooler crashes. Error 0x000006be

  So, I spent several hours working on this problem and nothing seems to help.

  I have Windows Vista Ultimate SP1.  When I try to add a printer, properties of control server or anything else related to printing, I just got the error "windows cannot add a printer [or" server properties cannot be read "" "]." The local print spooler service is not running.  Please restart the spooler or restart the machine. »

  When I restart the spooler via administrative tools/services, or from the command prompt (it's supposed to be successful) attempt to add a printer again, I get the error message 'the operation cannot be completed (error 0x000006be)' and the spooler promptly crashes again.  This just started to happen suddenly, and no not because I tried to install some any printer.  If it helps, I've been using a Dell Photo Printer 720, but I used it in the past with the same system, OS and driver without problem.

  I searched for solutions in the world and so far have removed all traces of the system printer drivers in the case of a corrupted file crashes the spooler.

  So far, I have:
  1 deleted all of the printers that could be uninstalled from Add / Remove programs

  2 cleared out the Windows\system32\spool\drivers\w32x86 and Windows\system32\spool\printers\ folders

  3. suppression of the subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers and HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers registry keys

  4 deleted default subkeys in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key

  Is there something else I could do to fix this?  Is it possible that the spooler application itself has a problem?  Or have I missed something it's ruin?  Any help would be REALLY appreciated!

  Hello urrghhvista,

  Try this:

  1. click on Start> select Control Panel> in programs and features> select turn Windows features On or Off.

  2. click on sign + Print Services.

  3. Select LPD and LPR. You must remove the Internet printing Client. Restart your PC to ensure there is no error in the spooler service.

  4. try to reinstall your printer software/driver.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Cannot add the header HTML - CFWebstore on CF11

  Hello

  I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

  Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

  Thanks in advance for any help!

  Gary

  I found this answer:

  To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

• ESXi 4.1 cannot add NFS data store on a Netgear READYnas 1100 (please help)

  I have a Netgear ReadyNAS 1100 NAS

  When I put an NFS share, so I can add a store of data on my ESXi 4.1, I

  use the following instructions in their site: http://www.readynas.com/?p=3030

  Each

  time I try to join the NFS share via the GUI, I get the following

  message: "operation failed, diagnostics report: unable to complete.

  Operation of sysinfo.  Please see the log file VMkernel for more details. »

  I have

  have also tried the SSH console using the command: esxcfg-nas

  -a/share/mynfs s o 10.0.0.10 mynfs and I get the error:

  "Connection to the NAS volume: mynfs.

  Unable to connect to the NAS volume mynfs: unable to complete the operation of Sysinfo. Please see the log file VMkernel for more details. »

  details of the journal of the kernel are:

  August 19-14:37:36 pass: cannot read the header on stream TCP (local = 127.0.0.1:60962, even = 127.0.0.1:0): N7Vmacore15S ystemExceptionE (connection reset by peer)

  August 19 at 14:37:47 pass: PersistAllDvsInfo called

  August 19-14:37:51 pass: airfare to CIMOM version 1.0, root user

  Aug

  19 14:37:59 pass: [2010-08-19 14:37:59.311 2AAA3B90 info "TaskManager"

  opID = 993 D 2353-0000037 C] task created: haTask-ha-host - vim.host.DatastoreSystem.creat eNasDatastore-1124

  August 19 at 14:37:59 pass: 2010-08-19 14:37:59.312 FFFB0B90 info opID = 993 D 2353-0000037 C ' Hostsvc::DatastoreSystem' creating test data store

  August 19 at 14:37:59 pass: AddNasVolume called

  Aug

  19 14:37:59 pass: [2010-08-19 14:37:59.312 talkative FFFB0B90

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] LookupVmfs: could not find VMFS

  volume id & lt; unset & gt; path, & lt; unset & gt; or name test

  August 19

  14:37:59 pass: [2010-08-19 14:37:59.312 talkative FFFB0B90

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] LookupNasByName: could not find

  NasVolume volume test n soul

  August 19 at 14:37:59

  VMkernel: 0:23:10:59.338 cpu0:5299) NFS: 149: command: (Mont) server:

  (10.250.50.93) IP: (10.250.50.93) path: (/ esx) Label: (test) Options:

  (Non                   e)

  August 19 at 14:38:29 vmkernel: 0:23:11:29.669

  CPU2:5299) WARNING: NFS: 946: MOUNT RPCfailed with State CPP 13 (CPP has been

  interrupted due to timeout) try to serve mount r

  (10.250.50.93) path (/ esx)

  August 19 at 14:38:29 vmkernel: 0:23:11:29.669 cpu2:5299) NFS: 160: mounting NFS 10.250.50.93:/esx failed: unable to connect to the NFS server

  August 19 at 14:38:29 vobd: 19 August 14:38:29.727: 83489529043us: http://esx.problem.vmfs.nfs.mount.connect.failed failed to get to the 10.250.50.93 Server mount point /esx. E rror: unable to connect to the NFS server.

  Aug

  19 14:38:29 pass: [2010-08-19 14:38:29.727 FFFB0B90 error

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] mount VmkCtl or ProcessNas

  has failed: operation completeSysinfo impossible.  Please see the VMkernel

  log file for more details.

  August 19 at 14:38:29 pass: [2010-08-19

  14:38:29.727 2AA15B90 'ha-eventmgr' info] event 79: impossible to climb to

  the 10.250.50.93 Server mount point /esx. C cannot

  me onnecter to the NFS server

  August 19 at 14:38:29 pass: [2010-08-19 14:38:29.740

  FFFB0B90 info "App" opID = 993 D 2353-0000037 C] AdapterServer caught

  exception: 2a6fb460

  August 19 at 14:38:29 pass: [2010-08-19 14:38:29.740

  FFFB0B90 info "TaskManager" opID = 993 D 2353-0000037 C] task completed:

  haTask-ha-host - vim.host.DatastoreSystem.cre ateNasDatastore-1124 Status error

  Aug

  19 14:38:29 pass: [2010-08-19 14:38:29.740 info FFFB0B90 "Vmomi"

  opID = 993 D 2353-0000037 C] Activation N5Vmomi10ActivationE:0x2a761010 : invoke made on vim.host.DatastoreSystem:ha - datastoresystem

  August 19 at 14:38:29 pass: Arg spec:

  August 19 at 14:38:29 pass: {(vim.host.NasVolume.Specification)

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: remoteHost = "10.250.50.93."

  August 19 at 14:38:29 pass: remotePath = "/ esx"

  August 19 at 14:38:29 pass: localPath = "test."

  August 19 at 14:38:29 pass: mode = "readWrite"

  August 19 at 14:38:29 pass: type = "nfs."

  August 19 at 14:38:29 pass: userName = & lt; unset & gt;

  August 19 at 14:38:29 pass: password = & lt; unset & gt;

  August 19 at 14:38:29 spend :}

  August 19 at 14:38:29 pass: throw vim.fault.PlatformConfigFault

  August 19 at 14:38:29 pass: result:

  August 19 at 14:38:29 pass: {(vim.fault.PlatformConfigFault)

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: faultCause = (vmodl. NULL in MethodFault),

  August 19 at 14:38:29 pass: faultMessage = (vmodl. [LocalizableMessage)

  August 19 at 14:38:29 pass: (vmodl. LocalizableMessage) {}

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: key = "com.vmware.esx.hostctl.default"

  August 19 at 14:38:29 pass: arg = (vmodl. [KeyAnyValue)

  August 19 at 14:38:29 pass: (vmodl. KeyAnyValue) {}

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: key = "reason."

  Aug

  19 14:38:29 pass: value = "could not complete the Sysinfo".

  operation.  Please see the log file VMkernel for more details. «,

  August 19 at 14:38:29 spend :}

  [August 19 at 14:38:29 pass:].

  August 19 at 14:38:29 pass: message = & lt; unset & gt;

  August 19 at 14:38:29 spend :}

  [August 19 at 14:38:29 pass:].

  August 19 at 14:38:29 pass: text = ","

  August 19 at 14:38:29 pass: msg = «»

  August 19 at 14:38:29 spend :}

  Check your DNS on the NFS Datastore server settings.  I had a timeout problem bad w / my NFS server.  We define for OPENDNS temporarily and NFS store popped up immediately.

  Joe

• WNDAP360 / WMS5316 - cannot add AP since the firmware

  Hi we have just updated the firmware on our access points (WNDAP360) 2 and cannot add them in the WMS5316 (ProSafe 16ap)

  I tried to perform a reset, it locates the device, but the progress indicator just to 0% with the rotation of graphics. The Web page times out. Ive left it 40 minutes

  I also manually configured on the same subnet, unused IP and tried to add through discovery of intellectual property

  This seems to have happened since the updates of the firmware:

  WMS5316 is on 2.1.5

  WNDAP360 are on 3.0.4.0

  Beforehand, they were always capricious to add like its never been clear what password to use. For reference, Ive tried our internal password that the group is configured for blank password and password password for example.

  I tried adding with new IPs and also the IP existing / default

  Everything I try, I can't do these Aps to add to the group / management system. Here are the recent errors in the system log:

  7 Oct 09:50:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 09:50:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:52:04 LEYWMS01 syslog.info - MARK-

  7 Oct 09:54:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:54:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed the status of success<0> offline: unable to connect to the server<-3>

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:57:07 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:59:10 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed status connection: unable to connect to the server<-3> to success<0>

  7 Oct 10:02:12 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:02:12 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:03:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 17 seconds

  7 Oct 10:05:17 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 19 seconds

  7 Oct 10:06:16 LEYWMS01 user.warn: WARNING: 192.168.0.100/images/product_logo.gif URL has had 184 seconds

  7 Oct 10:06:16 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:07:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:08 LEYWMS01 user.info: access point [ip:192.168.0.100] [model: WNDAP360] added to list managed

  7 Oct 10:09:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:10:19 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 183 seconds

  7 Oct 10:10:19 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:11:22 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:12:04 LEYWMS01 syslog.info - MARK-

  7 Oct 10:13:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:14:21 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:14:21 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:15:20 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:15:50 LEYWMS01 user.err ap_mgr_WNDAP360: can not deal with CPI since Timeout:Timeout has been reached<-4>

  7 Oct 10:17:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 22 seconds

  Now solved

  Had to manually assign an IP address in the same subnet (which had already been done), and then restart the WMS service, then try and add it again. Connection is established and the progress indicator has increased. Several times he has failed when even at 40%-60% and said the authentication has failed. However he did at least change the IP address to the new so something was working.

  I have left alone and returned to him and he said connected. It seems that the synch plant just constantly but ends by develops. Then I changed the password / group, it says failed again and finally himself developed.

  Garbage

• Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service

  Windows cannot start the Diagnostic Policy on Local Computer Service?

  Original title: error 1079

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community.

  From your post, it seems you are getting and error 1079.

  The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.

  What service are you trying to start?

  We will follow the steps in this link and check if this solves the problem.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  Thanks for posting the result and let us know if you need help on Windows.

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• Integration of the NAC Profiler - cannot add list of filters on cam

  Hi all

  I have a problem with the Profiler - integration of the NAC for endpoint profiling.

  Here's the situation:

  I have already created the integration based on the steps in the Guide: Setup Cisco NAC Appliance integration. I think that the configuration is correct, because I can do database synchronization between the Profiler and CAM. Here's the log of server profile:

  NAC_SYNC: Task_Queue_Runner commissioning
  NAC_SYNC: Profiler / END of synchronization of the NAC [add 0, upd 0, desc 0, rm 0]
  NAC_SYNC: Profiler / START the synchronization of the NAC
  INFO: [2010-12-15 11:01:09 (fcapGetHWAddr:49)] is for eth0 MAC

  I have already created a profile of endpoint named "Admin" which is based on the IP address. I also created the NAC events based on endpoint profile 'Admin '.

  The event of the NAC will present 'Admin' profile to a role of the NAC. This event aims to circumvent 'Admin' of the legalisation of the ANC visa so that the "Admin" can connect to the network automatically to a role of the NAC.

  However, when 'Admin' to connect to the network, it still is challanged by NAC. I don't see "Admin" on the filter of the CAM or the list.

  This means that the endpoint profiling is still broken.

  Is there anyone who have experience with this?

  Thanks for the support and comments

  Imad

  Hello

  You cannot add devices manually on the profiler.

  The Profiler has to detect automatically (it is the concept of profiling).

  How this Profiler detects endpoints use the modules of collector.

  Each module has endpoints detection means.

  You will find the description of each collector module here:

  http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/311/p_intro231.html#wp1062345.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• dynamically related files cannot be resolved due to an internal server error

  Hey there, I just worked through a Lynda.com tutorial on creating a Wordpress template in Dreamweaver, and I did everything to the T step by step.  I have set up a local server (mamp) before, but I've also followed this tutorial first to make sure that I was doing that well too. I followed the tutorial template Wordpress all the way until it was time to work on the CSS file.  When I went to 'discover the dynamically linked files' it gives me the error message: "linked files dynamically cannot be resolved due to an internal server error."  For the life of me I can't understand what is wrong for what I can fix it.  Without all the associated all files work that I just have to configure php files of header, footer, index, etc. is pretty useless.  How to understand what is the "internal server error" and fix it?  Help, please!

  Certainly, you should be able to view WordPress in Live View mode.

  I'm not creating this course, but I'm an author of lynda.com. If you are having problems with a course on lynda.com, go to contact us at the bottom of the page on the lynda.com website and select Customer Service & technical support in the menu drop-down of Department. It is best to do it from the course, with problems, preferably from the video where you encountered the problem. When you do so, the contact form is filled in automatically with details that will identify the course and where the problem arose. Fill in a brief description of the problem and it zap out of lynda.com.

  If lynda.com tech support people cannot meet this request themselves, they will transfer it to the author. You should normally get an answer within 48 hours, unless the author is not reachable for any reason any. Both the query is directly related to something demonstrated during operations, lynda.com provides technical support to all courses for the first two years after the publication, sometimes longer.

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.