Cannot connect Centro to external GPS bluetooth receiver
I have the Holux GPSlim 240 bluetooth gps receiver. I can successfully pair my Centro to the receiver in the "Trusted Devices" section by entering 0000 as the password. However, once connected, it is absolutely impossible to actually connect. When I press the menu button and select 'connect' I get the message: "the selected device is not supported in this menu. Please start the connection between the Holux GPSlim 240. »
But there is no way to establish a connection between the GPSlim 240, because there no buttons whatsoever, with the exception of an on/off switch. In addition, when you select "Details" of the peripheral screen on my Centro, it shows the TYPE for the GPSlim 240 as 'unknown '.
Please, how can I solve this? Any help would be greatly appreciated, thank you...
It would be I think you need to load the driver for BT in a mapping program to establish a successful connection.
I just added my Delorme Earthmate to my Centro easily, but without a program of mapping on my phone, I can't open a connection.
WyreNut
Tags: HP Tablets
Similar Questions
-
Cannot connect iphone 6 JBL j46bt Bluetooth using Bluetooth headsets
Cannot connect iphone to JBL Bluetooth headset j46bt 6. This morning the iPhone 'seen' the Bluetooth but could not pair. Now, it is not just to find the various. I tried now on the plu button still does not work. Help!
Just hold the power button longer when you turn on the jbl j46bt helmet, until the led flashes blue and red. After that you should be able to connect to your phone.
-
Cannot connect wireless keyboard 700 v2.0, receive the error code 28.
Original title: 700 wireless keyboard v 2.0 cannot connect to laptop
Gentlemen.
700 wireless keyboard v 2.0 cannot connect to the laptop, after checking the Device Manager said that "the drivers for this device are not installed. (Code 28) «,
Hello
What is a Microsoft Keyboard?
Follow the steps mentioned in the article:
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123
If you use try Microsoft Keyboard article below:
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
Try to download the driver of Microsoft Hardware download and check:
http://www.Microsoft.com/hardware/en-us/downloads
You can contact the Microsoft Hardware section if you have any questions:
http://www.Microsoft.com/hardware/en-us/support/contact-us
Hope the above information is helpful.
-
Satellite A200 - cannot connect my mobile phone via Bluetooth
I have the satellite A200 that came with Vista - I have upgraded to Windows 7. I tried for a few days to connect my new Nokia mobile to my laptop using bluetooth, but may not operate at all.
The phone is OK as I have to connect it to my previous mobile via bluetooth. A few months ago, I had to do a restore system using the Toshiba drive - is it possible that this could have affected the availability of bluetooth?
Any advice would be welcome - especially if someone can explain what it is I should do in a non-technical way. Thank you in advance.
Question is: have you installed all the discs properly?
You can activate the BT module using the FN + F8 key combination.I can't say for sure, but I assume that your BT in A200 camera is not correctly enabled.
-
DynDNS is online but cannot connect from the external network
I've set up DDNS the modem. IP is available but I can't connect external network.
Hello
Thanks for posting your query in the Microsoft Community Forums.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
Cannot connect mouse Microsoft Sculpt comfort Bluetooth constantly
I can't get my mouse Microsoft Sculpt comfort to stay always connected to my laptop (Win7 x 64).
In the middle of use, it stops working. I studied in the devices & Printers and the device returns is no longer there. I pass by add it a device Wizard, making sure that my mouse is discoverable (green and red lights flash alternately) and he said he's logged and it will look for a driver. The laptop detects a driver and a "Bluetooth Service Configuration" window appears.
Open Device Manager, I see that HID-compliant mouse is added to the list of mice and other pointing devices. As soon as the "Configuration of Bluetooth Services" window closes, the mouse is removed from the Device Manager and removed from devices & Printers.
I tried to uninstall and reinstall the Bluetooth driver.
I tried to turn off the Bluetooth power management feature.
I tried to change the batteries.
I tried to move closer and further away.
I tried browsing the Add Assistant device with Microsoft mouse & keyboard Center installed and uninstalled.
I restarted at various times during the process.
What should I try next?
- I didn't do any hardware or software changes before this problem I can think
- My computer is a Dell Latitude 6430u
- I have Kaspersky installed 10.1.2.23 on my computer. It is managed by Active Directory by my IT Department if I can't make changes to it or turn it off somehow.
Troubleshoot failures in detecting new Bluetooth mouse or keyboard
-Was not able to finish because I do not have permission to access the registry items in order to remove the bluetooth stackI performed a clean restart in any case and I tried to add the device again, and it worked this time.
I will update this thread if it decides to cut again for some reason any.
Thank you
okravetz
-
Windows 8 cannot connect to the external hard drive after you have added the drive case.
Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?
I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.
Hello
Thank you for the update.
Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.
Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.
Method 2:
Step 1: Check if the hard drive is detected in Windows Explorer.
To do this, follow these steps:
a. connect the hard disk of the computer.
b. press the Windows key + E to open Windows Explorer.
c. check if the hard drive is present here.
Step 2: Check if the hard drive is detected in disk management.
To do this, follow these steps:
a. on the desktop, press the Windows key + X , and then select disk management.
b. check if the hard drive is listed there.
Contact the manufacturer of the hard drive and hard drive enclosure for assistance.
http://www.Seagate.com/support/
Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.
-
Just bought this laptop. I know that it is supposed to have full Bluetooth connectivity out of the box. I tried everything, read all the instructions and knowledge base, etc.. Downloaded 2 packages of different drivers of my product page and searches, nor install, saying: 'not right for this device' or something like that. Tried to install the drivers for energy management and Bluetooth, no help. What is going on? I need a solution. I poured money from good headset Bluetooth to pair with this laptop. Thank you.
p.s., Microsoft's Bluetooth drivers are installed and checked for updates, these are courses
-
I'm unable to map to my external hard drive that I use for backup of three computers, the drive is connected to a desktop computer, I'm trying to map the drive on your laptop and it ask again me a network user name and password that I don't have, I tried all of the username and password in my arsenal and none of them work , I did not create my network with a password. can someone help me please.
You can follow the steps described in the connection with the similar question:
-
Cannot connect my cell phone to my computer via bluetooth
Cannot connect my cell phone to my computer via bluetooth
Cell phones are not supposed to be connected via Bluetooth to a computer.
-
force the use of an external gps receiver
I can force my rx5940 to use an external gps for tomtom navi and/or any other program installed navi
The built-in receiver is too slow
Brian
exactly what I needed thank you will try
Brian
-
I stopped to receive mail after December 31. It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?
MacBook Air, OS X El Capitan
First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.
From the Mail menu bar, you select
▹ Connection Doctor window
In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.
Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.
-
Cannot connect my Sony Ericsson C905 with adapter Bluetooth Toshiba
Hello!
I just bought a Toshiba Bluetooth adapter v2.1 + EDR and I use Windows XP. I installed the driver as in the manual, but I have a problem with the connection between my Sony Ericsson C905 and bluetooth. Bluetooth detects the phone, but it cannot connect to it.
What is the problem? :'(
Find the solution here:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50192&TSTART=0 -
Samsung galaxy is not - N7000 GT - cannot connect via bluetooth
I can't connect my mobile Samsung Galaxy Note - N7000 GT via bluetooth.
Hi HeshamSallam,
1. what operating system is installed on the computer?
2. you receive an error message when you connect to the device via Bluetooth?
Follow the suggestions below for a possible solution:
Step 1: Follow the steps in the article and check.
Add a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer
Step 2: You can search for Bluetooth device settings.
Change settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device
You can also see the following articles for more information on the connection of Bluetooth devices:
Change settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device
Connect to Bluetooth and other wireless or network devices
Add a Bluetooth device or other wireless or network device: frequently asked questions
Reply with more information about the issue so that we can help you better.
-
Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...
original title: cannot connect wirelessHello
· You get the error message?
Method 1:
I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.
Updated a hardware driver that is not working properly
Method 2:
Also, follow the steps in troubleshooting section and check if that helps:
In the Windows wireless network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
Check out these links and check if that helps
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
See also:
Solve problems with computers not appearing is not in the network mapHope this helps
Maybe you are looking for
-
FireWire 800, USB 3.0
I have an older iMac that has a Firewire 800 port and no USB 3.0. I would like to use the Firewire 800 port and convert it into a USB 3.0 with some sort of connection. This way I can take advantage of the most recent items USB 3.0... Is this possible
-
End of 2015 iMac is slow Lightroom / Capture 1pro 9
Hello IM find in Capture one Pro and especially Adobe Lightroom (all the current versions) these programs are extremely slow preview and it is actually slower then my model 2012 end to work on. I'm running out of ram 24gig, 3.3 GHz Intel Core i5 and
-
Install XP Pro (32 bit) with 8 GB of RAM
I have a new machine and I put Windows 7 Home Premium 64 bit on it. But I have a few old programs that may not work in Windows 7, so I intend to install XP Pro x 86 on a separate drive (two clean installs), dual boot. I know that Win 7 Pro and Ultima
-
Messages from blackBerry Smartphones sent via gmail presents in my Inbox of messages
I have the messages showing 'sent' option value not but my gmail sent messages still come. Anyone knows if I can change this so my gmail sent does not appear?
-
block websites Web of Cisco 800 series Router
Hello I have a Cisco router running. I want to block certain websites (facebook, twitter, etc.) and download files with extensions such as *.AVI, *.mp3, *.mp4, *.exe, *.wma, *.wmv and *.torrent etc... I want to block for some users (based on the MAC