Cannot connect HP 3050 has J611 wireless or USB

Similar Questions

• DJ 3050 has j611 says connected but offline, can't print why

  DJ 3050 has j611 says connected but offline, can't print why

  lehmankm wrote:

  light blue (flashing) wireless...

  Ah... There's the data I needed.   Wireless light flashing means that you are not connected to your routers SSID.   You need to connect the printer to your routers SSID with password.

• HP Deskjet 3050 has J611 printer without a driver.

  What happens to my driver for my printer HP 3050 has J611 it saids no driver?

  [Moved from comments]

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Cannot get deskjet 3050 has in a j611 series print

  my printer does not print

  Hello

  Thanks for posting the question on Microsoft community forums. Looks like you can not print using HP Deskjet 3050 has.  Please answer a few questions to refine the question.

  1. do you get an error message?

  2. are you aware of changes to the computer before the show?

  3. what happens when you try to print?

  I suggest you perform the steps described in the article:

  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please reply with the status so that we can help you.

• HP Deskjet 3050 a J611: Driver not recognized HP 3050 has J611

  I recently got a printer HP Deskjet 3050 a J611.  I get an error message saying driver is not updated.  I downloaded the driver (not sure if it was good because there is a choice of 3) (J611a, J611b and J611g).  I tried again and it still does not.  The HP troubleshooting page recognizes the printer is connected, but it won't work.

  Please help to get very frustrated.

  Thank you

  @Captainyaya,.

  Please follow the steps below:

  1. disconnect the USB.

  2. remove the HP 3050 a DJ software go to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software DJ 3050 has disappeared from the list programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your 3050 a DJ (DO NOT connect USB until the software prompts you to):

  HP Deskjet full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you

• Cannot connect HP Photosmart 5515 series wireless on my laptop

  Hello, I use a hp pavillion g6 and im trying to connect wirelessly to my printer Photosmart, 5515 but im having problems with the computer was implemented wirelessl room in my house for a while and me can print quite easily using my Iphone but I cannot set up wireless. He invites me to enter my IP address I do, but then he repeats just cannot connect I also tried to use hostname, but that does not work either please help the two devices are connected to the internet even and I checked they are running both on the same IP address

  Thank you

  Try to go in the tools on the printer and to restore the default settings of the network.  He's going to knock it out of the network briefly but then set it back up as if it were the first time.  You meet intellectual property conflicts, and it is a first step in troubleshooting.  It can change the IP address of the original one, as well, but that is not a bad thing.  Let me know how it goes.

• DeskJet 3050 has J611 printing project

  So I have a 3050 a J611.  I want to adjust the print quality settings and it won't let me.  I'vegot best, Normal, project and custom, but only Normal and custom are selectable.  I want to be able to select one of them, why can't I?

  I was looking just at things once again, and it's sort of silly system.  Quality is selectable in the tray press selection section.  I think they have just forgot to remove the redundant part for quality selection.   v

• Destjet HP 3050 has j611 all-in-one series does not not on windows 8

  I got Hp Deskjet 3050 a j611 all-in-one series on my windows 7, I've upgraded to Windows 8 and my printer did not work properly so I uninstalled so I could reinstall it, but it will not install because it says that it is not compatible. is it possible that I can make this printer work using Windows 8?

  Hey kelyka1,

  I guess you are trying to reinstall with the CD supplied with the printer.  Click on the link below to access the download page for the driver for Windows 8 for the Deskjet 3050 a J611.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5061082&sw_lang=

  I hope this helps.

• HP Deskjet 3050 has J611 CN1684C location on ipad for the readmission of the wireless printer code

  do not understand the request

  Hello armeson,

  You must go to www.eprintcenter.com and set up a user account. Once you have an ePrintCenter account you can add your printer to the account with the code for the printer that you were on the list in the subject line... After you have entered the code, you will be prompted to name your printer and this name will be part of the e-mail address of your printer.

  BTW, I got the code printer removed from the subject line of this thread to protect your privacy.

• HP 3050 has J611: attempt to sync HP3050A J611 printer on my I pad pro. No computer available.

  I have the printer hooked & ready to go, but do not know how to get to a menu on it to enter the name of the network wireless & password.   All I have is an I pad pro.  Want to print from the i pad.  Printer comes with a disk for the installation of the OS, but I don't have a computer.  How can I get these two together?

  A friend has his laptop more. After it connected to my printer, she managed to get the router to talk to my I pad.  Now, I can print from my I pad for the printer.

• Cannot connect Windows XP to the wireless printer.

  WINDOWS XP PRINTER WI - FI CONNECTION

  I have Windows XP Media Center Service Pack 3 OS that worked a HP Photosmart Plus B209 a - m with a USB cable.  Since I just bought a new laptop (Windows 7 Professonal OS) I decided to create a home network with a router Cradlepoint MBR 900.  The two laptops (XP and 7 OSs) were connected to the internet via the router with no problems.  Windows 7 Pro OS laptop is connected wireless to the printer Photosmart Plus, I had implemented as confiquiration wireless the printer first.  But the failure of the attempt to get the OS Windows XP Media Center to connect to the wireless printer.  During the installation process to connect the printer to the XP system wireless it asked me to choose which printer I wanted to connect to.  The Photosmart Plus printer was selected and visible, then I clicked Next.  Shortly after, a small screen appeared stating the "serscan.sys" file could not be found and I have to insert a Windows XP Pro CD to get the file or run the installer of this file.  This issue has occurred both when I tried to install it with the CD provided by HP and when I tried installing the HP download website.  All I have is a recovery for Windows XP disk provided with the laptop and not a CD Windows XP Pro.  What should I do to fix this?  Thanks, Lonnie

  Thanks, that was fast.  Please, let me make sure I have this correct.  First of all, I have two recovery disks provided with the computer, with Windows XP Media Edition and one for the drivers.  I should not use either of these disks, right?  If I had the previous correct answer then let me ask the following question;  When looking to borrow the disc should be Windows XP Media Edition or can I borrow any disk of Windows XP?  Kim Merci for your help continues.  Lonnie

  Lonnie,

  Before the hunting around for friends who might have a CD, do the following research.  For each of them, make sure that you have checked the search options in the 'Advanced Options' to

  • Search system folders
  • Search for files and hidden folders
  • Search subfolders

  Search your entire hard drive and both CDs you have to serscan.  Do not include the .sys at the end of the file name.

  Search for Driver.cab.  Report of the Office (s).  On your hard disk, you should find one or both

  • C:\Windows\i386\Driver.cab
  • C:\Windows\Driver Cache\i386\driver.cab

  You can also find these files on the "recovery disk".

  Report what you find, including locations of found nothing.  It is possible (but I don't think likely) you will find a file named serscan.sy_ - If Yes, include this information in your results.

  Or, if you want to ignore all this, you can download serscan.sys since my SkyDrive-->

  https://SkyDrive.live.com/redir.aspx?CID=18b259158254905b&RESID=18B259158254905B! 225 & Thierry = 18B259158254905B! 214

  The file should go to C:\Windows\system32\dllcache (a hidden directory) and probably in C:\Windows\system32 (I do not use this file, if it is not in my system32 folder).

  Or you can just save it to your desktop and "direct the Setup" it there (if you do this, check more later to confirm that he got into C:\Windows\system32\dllcache and if not, put a copy).

• HP Deskjet 2540: help! Cannot connect to the home network wireless HP 2540.

  So, I'm trying to connect my new wireless printer to my home network.  Yay!  I move into the 21st century!   Not so fast, Buster!

  Here's the run down:

  I ran the installation CD, connected to a USB port when told to find my SSID, entered my password, he did his thing and then he said that I had the wrong password.  Perhaps. Ok.  Tried again with the same results.    Connected on the router (gateway of Technicolor), checked the password.  Nope, it did ' t change.  Tried again, and this time, I hit the button troubleshooting when he told me that I had the wrong password.

  I followed the guide that he d/l would be after the presentation of the error report.  Run the test of wireless network from the buttons on the printer and it says "the WPA security password configured on your HP printer is not your wireless router setting."  I assure you, expensive printer, I have not.

  Jumped on the router page configuration when you are prompted by the guide troubleshooting and ensured that MAC filtering has been set to 'allow all' which, according to the manual of the router assures me, will allow all devices to connect.  Made sure that the 2 GHz range was alive and Kickin ' and that DHCP is enabled in the IPv4 & 6 tabs.  I even reset the router as the troubleshooting guide said.  Ran the test report yet, not logged in.  It is then the troubleshooting guide abandoned and directed me here.

  But then I noticed in the manual of the printer there is a WPS function available!  WPS!  It's must be!   Pressed the button wireless to the printer for 5 seconds to put in WPS mode, press the button on the router... not good.  I noticed that on top of one of the many reports of tests wireless network there is a WPS PIN which was good for 5 minutes.  Got a new a new wireless network test report, went into the router WPS customer PIN login page, entered it... no good.  I tried again with the page, open and ready to go, just in case I took longer than 5 minutes.  Still not good.

  So I thought I would at least give the option 'WiFiDirect' to try printing.  I printed the page "Use printer wireless without a router" by pressing the direct wireless for about 5 seconds, found the printer in the WiFI networks and entered the password to 8 digits when he asked for the WPA key.  I don't remember if he said it was the wrong key or what, but now it just says: unable to connect to the network.

  All the test reports diagnostic results show the wireless on and functional.  Connectivity has not been executed, the SSID was found with no other network corresponding to my network name, with 12 other networks detected.  The settings part was not run and Security (in bold and in italics as in the report) down (in the report) since, I guess, he thinks that I have the wrong password.  Who, once more, I assure you that I am not.

  So my question is basically this: now what?

  Well, I told you a hundred times... Gateway devices are terrible for connectivity and wireless performance.   My suggestion is for connect you to put this bridge in full bridge mode device and buy a router of high quality that you have full control over and you.   I gave everything but peripheral gateway troubleshooting.

• HP Photosmart B109: cannot connect the printer to the wireless network

  I have some setting wrong my printer for wireless printing. It has worked well in the past, but with my new macbook air - this isn't.

  I can't access the function where to add the printer to the wireless network (my router does not support WPS so his password WPA).

  I remember setting this up on a PC - easy with the driver provided by HP, but on the Mac, the configuration tool does not appear to be a function where I add the printer to the wireless network - and HP did not provide a driver, because it is supposed to work with the mac built-in software.

  The manual says only: "follow the instructions on the screen", but the printer does not have instructions on how to connect - on-screen tests, only that it is connected...

  Anyone who knows how to add the printer to a wireless network?

  Hello @Joahkim!

  Welcome to the HP community!

  I understand that you have a problem to set up all-in-one printer wireless HP Photosmart (B109n) with your new MacBook Air OS x 10.10. I want to help you with this.

  Have you changed your router or your password since the MacBook Air? If this is not the case, your printer can still be connected to the network and the trickiest part of that place will be done for us already.

  We will print a Network Configuration report to see if it is connected:

  • On the Control Panel, press the button next to Scan. The Scan/Wireless menu.