HP 3050 has J611: attempt to sync HP3050A J611 printer on my I pad pro. No computer available.

Similar Questions

• HP Deskjet 3050 has J611 printer without a driver.

  What happens to my driver for my printer HP 3050 has J611 it saids no driver?

  [Moved from comments]

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• DeskJet 3050 has J611 printing project

  So I have a 3050 a J611.  I want to adjust the print quality settings and it won't let me.  I'vegot best, Normal, project and custom, but only Normal and custom are selectable.  I want to be able to select one of them, why can't I?

  I was looking just at things once again, and it's sort of silly system.  Quality is selectable in the tray press selection section.  I think they have just forgot to remove the redundant part for quality selection.   v

• DeskJet 3050 has J611 printer, windows 7 64, sony vaio F series with router netgear seem incompatible

  I was able to connect successfully the printer to my computer sony vaio notebook, as much as I first disconnect internet router, after that the installation I can connect internet once again, then it works for a few hours. However, when I turn off and restart the computer, the computer does not find the printer. Meanwhile, the printer is connected and has the correct network and are accessible from my Ipad or eprint, but not of my sony vaio. I tried all the solutions proposed in the various forums without success. Can anyone help? I also checked that my computer is on the same network. The printer appears "shadow" under devices and printers. Thanks in advance.

  What router are you using?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for the second.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• DeskJet 3050 has J611: printer interrupts the headers and footers

  Hello

  When I print my documents, the printer cuts the headers and footers. I use Microsoft Word 2013 and have checked to make sure that the margins are narrow as Tess in Word, but the printer cuts my headers and footers. An error message appears that reads the document is out of print areas. This is a mistake with my printer, and if so, what is the solution? Thank you very much.

  @jun_per

  The specifications have not any information on restrictions "margins".  In general, the high margins and the size may be restricted a.11 inches, while (for some printers / paper) the background may etre.5 inches.

  IF the printer like / limit top / bottom margin a.5 inches, so that the word 'Narrow' margin setting may be in conflict with the ability of the printer to print the document.

  Maybe you can change the margins of the document 'Normal' or something similar.

  You can also adjust the settings individually.

  Word Document > file > Print > click on layout > layout tab

  Check to see where your headers and footers are defined compared to the whole "Narrow margin" setting.

  You can adjust the header and footers downwards / upwards away from the title of the document / paper edge.

  Example:

  Word Document > Insert > footer (drop down menu) >

  (look at the bottom of the parameters available footer) Change the footer > adjust as you wish

  General help, suggestions and examples:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• DJ 3050 has j611 says connected but offline, can't print why

  DJ 3050 has j611 says connected but offline, can't print why

  lehmankm wrote:

  light blue (flashing) wireless...

  Ah... There's the data I needed.   Wireless light flashing means that you are not connected to your routers SSID.   You need to connect the printer to your routers SSID with password.

• HP Deskjet 3050 a J611: Driver not recognized HP 3050 has J611

  I recently got a printer HP Deskjet 3050 a J611.  I get an error message saying driver is not updated.  I downloaded the driver (not sure if it was good because there is a choice of 3) (J611a, J611b and J611g).  I tried again and it still does not.  The HP troubleshooting page recognizes the printer is connected, but it won't work.

  Please help to get very frustrated.

  Thank you

  @Captainyaya,.

  Please follow the steps below:

  1. disconnect the USB.

  2. remove the HP 3050 a DJ software go to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software DJ 3050 has disappeared from the list programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your 3050 a DJ (DO NOT connect USB until the software prompts you to):

  HP Deskjet full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Destjet HP 3050 has j611 all-in-one series does not not on windows 8

  I got Hp Deskjet 3050 a j611 all-in-one series on my windows 7, I've upgraded to Windows 8 and my printer did not work properly so I uninstalled so I could reinstall it, but it will not install because it says that it is not compatible. is it possible that I can make this printer work using Windows 8?

  Hey kelyka1,

  I guess you are trying to reinstall with the CD supplied with the printer.  Click on the link below to access the download page for the driver for Windows 8 for the Deskjet 3050 a J611.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5061082&sw_lang=

  I hope this helps.

• HP 3050 has J116g: How do install you a printer HP 3050 has J116g internet wireless

  We have a wireless NETGEAR but not internet router.

  I created one with the Internet several times without problem.

  How do install you a range of printers HP 3050 has J116g as wireless internet?

  Thank you!

  Thank you for responding @tollymcc

  The Netgear should disseminate its own signal, you should be able to view and connect to available wireless networks on your computer.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP deskjet 3050 has J611 series and Mac Osx 10.7.1

  I am trying to install the printer hp desk jet 3050 a (series j611) and I have the mac os x 10.7. 1 operating system and it does not install. Can you help me?

  No, this is not true.  This printer is compatible to the current OS X 10.8.  Your CD may not be compatible, but...

  Download and install the latest version of the software for your printer from Driver link request at the top of this page

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Cannot connect HP 3050 has J611 wireless or USB

  I just bought and tried to install this printer. Installed the software and got to the configuration section. The HP software does not recognize that the printer is connected wireless, so I tried the USB method-aided and plugged the USB. The HP software detects again a connection, but the printer appears on the Control Panel printer Mac and I was able to print a page correctly. However, as soon as I unplug the USB printer is lost for the Mac.

  What is going on?

  With the help of an iMac (1 year, 6 - OSX Snow Leopard) and a standard BT HomeHub2.0 router. By the way my iPad also does not detect the printer.

  Thanks for getting back to me. I'm afraid it was my fault! When I double checked, I had downloaded the drivers for OSX 10.7, not 10.6. Not surprisingly, with the correct software, the installation program has worked, but thanks for the quick response!

• HP DESKJET 3050 HAS J611 PROBS JPG SCAN

  Why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  DOC7777 wrote: why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  Hello DOC7777, I think that the default format for your printer is in jpg format. You can download and install the latest version of the software for your printer, if you have not already.

  There may be an option to save the scanned in a different format. Most of the scanned jpg images can be inserted into a Word document.

  Here is the link for the package full feature software/driver for your printer.

• HP Deskjet 3050 has J611 CN1684C location on ipad for the readmission of the wireless printer code

  do not understand the request

  Hello armeson,

  You must go to www.eprintcenter.com and set up a user account. Once you have an ePrintCenter account you can add your printer to the account with the code for the printer that you were on the list in the subject line... After you have entered the code, you will be prompted to name your printer and this name will be part of the e-mail address of your printer.

  BTW, I got the code printer removed from the subject line of this thread to protect your privacy.