Cannot connect to Netflix, says I'm not connected to the internet.

Similar Questions

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• WRT54GL establishment cannot connect to the Internet

  I'm so basic in my problem as I feel stupid, but I get the message that the router cannot connect to the Internet.  Why the hell not?  I am writing on the same laptop, using the same ADSL modem and Internet connection.  So why don't the router sees it?  The last time I have tried again, start over from scratch, he kept do and re-do "check your computer's connections" and then ask me again my password of.  I didn't know if he wanted the original preset 'admin' or that I had sometimes back (hours) came the first time that this has been asked.  So I tried both.  Finally he moved reset the password or something, and I finally return to the "the router cannot connect to the Internet.  Power, then turn on the DSL Modem. "I did already too many times to count.  And again I say, this direct DSL connection of the modem for my laptop is fine.  But when the cable Internet through the router, then the other wire goes to my laptop, no Internet.  All the time my DSL modem displays a green light for the Internet.  And the router shows a light on the Internet.

  I'm too tired to walk any further tonight.  Maybe someone has a simple suggestion.  I'll check tomorrow.

  Thanks for helping this rank amateur.

  Try to configure the router manually.

  Connect the modem to the Internet port and the computer and port Ethernet 1 of the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

  Follow this link to configure the router with DSL Internet Service.

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• I had Acrobat Pro 8.3 for awhile. It is a registered product. However, as I updated to Windows 10, repeat me that it cannot connect to the internet to register or update the product

  I had Acrobat Pro 8.3 for awhile. It is a registered product. However, given that I have updated to Windows 10, he repeats that it cannot connect to the internet to register or update the product. I am connected to the Internet. What should I do?

  Thank you

  Reinstallation of my original DVD has solved the problem.

  Charlie

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• Old computer reinstalled XP cannot connect to the internet. Could not find the iexplore

  I have an old computer.  I reinstalled Windows XP on it about 30 days ago.  I can't connect to the internet.  I bought 2nd hand computer and I bought my own version of XP directly from Microsoft.  I can't activate.  I can not even find iexplore.  Any suggestions?  I installed a driver for the ethernet card and still nothing.

  I've never dealt with XP MCE, but from what I've seen, you can get ambiguous messages during the installation process.  MCE was never intended for installation by end users; It came normally pre-installed on computers that have the necessary equipment to support additional features 'media '.

  It seems to me that if you have to start over.  First of all, you should get a prompt for "Windows XP Professional CD2" - who wants to have the second of the two CDs.  Then you should get a prompt for "XP Professional Service Pack 2 CD." In response to this prompt, insert the CD first back in.

  Assuming that work better than before, right-click on desktop and select Properties.  If the display shows service pack 2 - which I believe it will be - you only need to install sp3.

• I cannot connect to the internet and can not find networks as well.

  Original title: a disc XP Wibdows will repair a missing msnuser file? I can't find all the networks to connect to the internet.

  After a router problem, I had to change the name of my network. All my other PC is connected. My Dell XP Pro has for some reason not configured to search for local networks. The only error message I got was 'msnuser file is no longer available.

  I have a brand new Windows XP in case of a crash Pro CD, but I don't want to try to find out that I lost what is already stored.

  This CD will correct connectivity issues? I could back up what I need if she wants. BTW: Dell has been no help.

  Thank you.

  Hello

  I you have to check out these items-

  http://support.Microsoft.com/kb/832161

  http://support.Microsoft.com/kb/870702

  http://support.Microsoft.com/kb/308007

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.microsoft.com/kb/322756 - how to backup registry.

  Let us know if it works for you.

• eFax already register, cannot connect to the internet.

  After tapping on the eFax print application, you receive error message "unable to connect to the internet, please activate the web services or connection eFax app."

  Steps below are ONLY if your eFax app had previously been setup.  A problem of synchronization as the eFax print requires HP Web Services to connect to the server.

  Note: eFax Soft printing is ONLY available pre-installed on select HP printers.

  1. press on the icon of web services in the upper left corner of your printer.

  

  For the brief moment the printer say loading its actually re-sync with the server ePrint to load the email address of the current x.     You should be able to press home, then press print eFax app for the previously saved eFax number.

  

  NOTE: ePrint service: STOP will cause the same error message as ePrint is required to connect to the internet.

  Press settings.

  

  Tap ePrint, then tap activate ePrint characteristic of service.

  

  Try tapping the Home button, then select eFax print app to see a previously saved eFax number.

  Note: If it does not, the selection to print the report in the web services menu above requires the printer to reconnect to the ePrint server and automatically resynchronize with eFax server.

  2. If the previous steps do not resolve the "cannot connect to internet" error message, you may need to adjust the network settings on the printer.   See post below.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/unable-to-connect-to-Internet-through-...

  ________________________________________________________
  Say 'Thank you' by clicking on the Blue Star of congratulations in the post helped you.
  Please indicate the position that solved your problem as "accepted Solution"; Therefore, it is easier for others to find.

  I am an employee of HP.

  Thank you!

• DeskJet 3520 cannot connect to the internet

  I bought a new Deskjet 3520.  I set it up on the wireless network, and everything seems fine.  However, as I'm trying to implement Web Services, he told me always impossible to connect to the internet, it does not say why.  I have the correct key in place, and everything else on the wireless can connect to the internet.  I have uninstalled/reinstalled software... rebooted the router, restarted the printer, still no go.

  I understand that you are not able to connect to web services.  I would follow the steps below.

  1. get the IP address of your printer.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

  Let me know how it goes.

• Satellite C660 cannot connect to the internet

  I am a total novice when it comes to these things.

  I recently installed Windows 7 32 out of a recovery disk, my friend did for me from the Microsoft Web site. Now, I can not connect to the internet.

  There is a small box with a red criss who says "no connection is available" and when I troubleshoot it says I need to install a driver for my network card.

  In Device Manager, it has the yellow! in other devices, next to Ethernet controller, network controller, controller of communication simple PCI and unknown device. I tried to connect my wireless adapter that I use on my main to pick up WiFi, computer, but that no longer works.

  Also, I went to the section Toshiba drivers and tried a few drivers but none seemed to work.

  Can someone tell me please exactly which driver I need to download to my computer with WiFi?

  Thanks :)

  > Can someone please tell me exactly which driver I need to download to my computer with WiFi?
  We can help you with this, but please exact notebook model poster and the name of the template to verify the hardware configuration and find out what WLAN card is inside.

  By the way: if I understand you is good you have preinstalled version of the OS and not the recovery image, on the right?

• Reinstalled XP - cannot connect to the internet

  Hello.  I have an Asus Eee PC 900, which I restored to factory settings, using the XP disc that comes with it.  However, I can't connect to the internet.  By the way I'm having exactly the same problem with my Eee PC 701 with Windows XP, after restoring to factory settings too (have installed Linux and it connects fine) so I think it's an XP thing.

  The pc displays available networks, I tried everything that I know, have set up the network and typed in my network key.  When I try to connect, nothing happens.  If I try to fix it, I get the message Windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network.

  I tried:

  (1) to reinstall the driver (it says it of Ok, and is the last being listed).
  (2) setting the date and time correctly on the computer.
  (3) check that 'enable IEEE... '. "is checked, authentication
  (4) turn off ' use Windows to configure my wireless "(but if I do, no available wireless networks appear)

  I wonder if Service Pack 2 is simply too old to connect to internet!  Is there anything I can download on my other computer on usb and install it on either an Eee Pc?  Like Service Pack 3 or something?

  My network is WPA2 Personal

  The box to "enable authentication IEEE 802. 1 x for the network"must NOT be checked.

  You should have installed Service Pack 3 for your restoration efforts.  Unpatched, Windows XP Service Pack 2 is not able to connect to wireless networks that use WPA2 encryption (which is what you are - and should be - aid).  Older hardware may also be unable to connect using WPA2, but this doesn't seem to be your problem because you connected before the restoration and that you can connect now using Linux.

  There is a catch-22: Windows Update will not install updates for XP (including Service Pack 3) except if you have installed Service Pack 3.

  Connect your computer to your router with an Ethernet cable and do the following:

  • Read http://support.microsoft.com/kb/950717
  • If your PC is a HP Pavilion and Presario, Media Center and has an AMD processor, install the following hotfix before you install SP3--> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk&lc=en&dlc=en&softwareitem=pv-60484-2
  • Download SP3--> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24 (ignore warnings about the network facilities and computing professionals)
  • After you install SP3, go to Windows Update and install post-SP3 updates a lot; several reboots will be probably needed
  • Now, follow these steps to retrieve your wifi connection:
  1. Right click on your wireless connection icon and select Properties
  2. Select the wireless networks tab
  3. Confirm that "Use Windows to configure my wireless network" is CHECKED
  4. Remove all entries in the list of "preferred networks".
  5. Click 'View wireless networks,' select yours, enter your WPA2 password carefully, then click on connect

  If you are unable to connect your computer to the router with an Ethernet cable for a reason, use another computer (for example, the one you use to ask questions here) to download the patch from the HP site and program installation of SP3 from Microsoft of the site and to copy on a USB or burn it to a CD.  Then copy the files on the desktop you're your computer and run them as if you had downloaded them.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. This is probably caused by the settings of firewall on this computer.

  I have a laptop Toshiba Satellite M105-S3041 with Windows XP Home Edition.  I received the error message listed above indicating that Windows cannot connect Internet using HTTP, HTTPS, or FTP.  When I open the wireless network connection status, I see packets sent and I also see that I get both packets.

  The opening to the top of Internet Explorer, I received the error message listed above.  When I go to the properties of my wireless adapter and examine the properties of the TCP/IP parameters, I see that I have "obtain an IP address automatically" and "Obtain DNS server address automatically" checked.  On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button.  Here, I see that the ports TCP, UDP and IP PROTOCOL.  I have a check the box 'enable TCP/IP filtering '.

  Please help me because I am still unable to connect to the internet.

  [snip]... On the general tab of TCP/IP properties, I clicked on the tab advanced and click on the tab options to display the TCP/IP filtering settings and clicked the properties button.  Here, I see that the ports TCP, UDP and IP PROTOCOL.  I have a check the box 'enable TCP/IP filtering '.

  In general, you don't want to have a check in the box "enable TCP/IP filtering.  Try to uncheck this box and see if it helps.

  If this does not help, two programs freeware difficulty sometimes of the problems of this kind...  Try to run LSPFix and/or WinSockXPFix.  Alternatively, you can try to reset your IP stack...

  "How to reset the Protocol Internet (TCP/IP)"
    <>http://support.Microsoft.com/kb/299357 >

  HTH,
  JW