Cannot create a volume larger then Go 212

Similar Questions

• Cannot create Volume License Setup

  I am trying to create a volume for LabVIEW 9 License Installer, and I get the following error:

  Error copying file or folder

  Cannot copy mib: access denied

  Make sure that the disk is not full or write protected

  and that the file is not currently in use.

  The DVD file is somehow used?

  -Nils

  Looks like I found the problem:

  (1) the license server is running on a virtual machine that is running Microsoft Windows Server 2003

  (2) is not a DVD player, so I use the DVD drive on my laptop, set up as a shared drive.

  (3) McAfee on the laptop and the Server parse all files for viruses when they are open.

  (4) when the VLM bed mib.cab Installer, which is a large file size (> 1 MB) somewhere a process times out and fails the creation of Setup.

  Solution: Disable McAfee on the server and on the laptop, or copy DVDs on a local drive on the server.

• Another: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183 but on XP Pro

  I am changing a laptop Windows XP Pro using the converter software 4.0.1.

  He will start the conversion process, but after 10 seconds or so, I get the error: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183

  The strange thing is my images of box Vista successfully without problem.

  I'm in a corporate environment. I moved the laptop test I try the image of an OU restrictive and placed in a non-restrictive ORGANIZATIONAL unit (without firewalls and others). I always have the same question.

  I made sure all the VSS services and these are running and active. I even tried MS KB Article 941956 comes to do even if it said it was only for Server 2003.

  Any other pointers on this? It seems that a lot of people get this error, but the only ones I can find are for server operating systems... not XP.

  In the event under application Viewer I have errors of:

  Type: error

  Event ID: 12292

  The volume shadow copy Service error. Error creating the Shadow Copy Provider COM with CLSID {65ee1dba-8ffa-4a58-ac1c-3470ee2f376a} class

  Type: WARNING

  Event ID: 4356

  {The COM system + impossible to create an instance of the Subscriber partition:{41e90f3e-56c1-4633-81c3-6e8bac8bdd70}!new:{d3938ab0-5b9d-11d1-8dd2-00aa004abd5e}. CoGetObject returned HRESULT 80070005

  Type: WARNING

  Event ID: 4353

  The event of COM + a system attempted to raise the EventObjectChange::ChangedSubscription event but received a bad return code. HRESULT was80040201

  Type: error

  Event ID: 8193

  Volume Shadow Copy Service Error: Unexpected error calling routine CoCreateInstance. HR = 0 x 80004002

  You are able to start these three services; EventSystem, swprv, vss?

  What is this command returns; "vssadmin list writers"?

  Joakim

• Satellite A-P50-12PNL - after Win8.1 upgrade cannot create the system image

  After updating my laptop Satellite P50-A-12PNL to Windows 8.1 I can't create an image system (copy). The message:

  +"There is not enough disk space to create the volume shadow copy on the storage location. Ensure that, for the volume to be backup upward, the minimum disk space required for the creation of shadow copies is available. This applies to the backup destination and volume included in the backup. Minimum for Volumes less than 500 MB, the minimum is 50 MB of free space. for voulimes more than 500 MB, the minimum is 320 megabytes of free space. Recommended at least 1 GB of free disk space on each volume if the volume size is larger than 1 GB (0 x 80780119) ' + '.

  I think the problem is the Windows for the systemrecovery reserved surrounding.
  This seems to be too full. 350 MB 349,94 is in use.

  What should I do to get it working again the backup?

  Usually you could solve this problem by extending the partition on the volume where the shadow is being created.

  You can make the disk check and check if the problem persists.
  1) press the Windows key + C to open the bar of charms.
  (2) now, click on settings, then PC settings.
  (3) now, click general, and then click Restart now under Advanced Startup.
  (4) now click on troubleshoot.
  (5) now click on advanced options and select command prompt.
  (6) type Chkdsk /r and press ENTER.

• Cannot create partition during the Windows installation.

  Hey

  You have a problem with the installation of Windows (10 or 8.1, same problem). I share the part Boot Camp using the tool, but once I'm in the installer that I meet a problem. I format the BOOTCAMP partition scored, but then Windows says that it cannot create a new partition.

  Some impressions diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage GB internal Drive disk1s2 648.9

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 350,5 GB disk1s4

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 764,0 GB disk2

  Logical volume on disk0s2, disk1s2

  4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9

  Fusion unencrypted drive

  List of CS

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group C4FDFFD0-7D27-4DCC-9034-2D19E7487DCD

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 769855381504 B (769,9 GB)

  Free space: 180224 B (180.2 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 648866529280 B (648,9 GB)

  |

  +-> FDD23DD2-C30E-4575-B7B1-50CBCB539D10 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical Volume 4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 763999944704 B (764,0 GB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 236978175

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  236978136 7

  236978143 32 table dry GPT

  236978175 1 dry GPT header

  Daniels-iMac: ~ danielzandian$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  You can also post the output of

  sudo TPG - vv - r see the/dev/disk1

  sudo fdisk/dev/disk1

  What is the year/model of your Mac?

• Cannot creat Image system (Acer Aspire)

  Hi all its my first question to post here. I decided to do since I tried the other suggestions of different forums but nothing helped.

  We have this Acer Aspire x 3900 WIN 7 Home Premium 64 - Bit 6 GB of RAM 1 TB HARD drive (partitions of 2 - C:300 and D:700 Go. Problem is that I can't create system external HARD Disk Image

  Error:

  Cut due to a device error in the volume of the source or the destination volume. SE of origin or of destination and on a disc.

  run Chkdsk / R on the volume, and then try the operation again. (0x8078012D)

  More information...

  Cannot run the application because of an error i / O device. (0x8007045D)

  Help, please

  I tried below, but still does not.

  running chkdsk of source and destination HDD

  sfc/scannow

  checked the option "allow the files on this drive to be indexed.

  http://www.YouTube.com/watch?v=oSdWDHY3F2I

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/system-image-backup-error-IO-device-error/0c2c6efa-9cd1-4D41-B509-63993150abab

  etc...

  Hello Levis,

  Thank you for joining and offering us the opportunity to help Microsoft Community.

  Do you have any third-party software backup installed on the computer?

  I appreciate that you've tried several troubleshooting steps before posting for us. I would ask you to try the advice given by JRChicago June 9, 2013 in the link provided below.

  System of image 0x8078012d and 0x8007045D errors

  You can also download and run the check disk utility provided by the Acer Support. See the link below for the download link.

  How can I test my hard drive?

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

• Cannot create the new drive and impossible to reduce c drive I want...

  My laptop disk management displays the following information...

  (1) healthy OEM 14.75 GB partition

  (2) 200 MB Healthy (System, active, primary partition) (containing the system files)

  (3) c: in good health (start-up, swap files, dump, primary) (which contains Windows) total 421 GB, free 400 GB (which contains Windows)

  (4) D: sound logic GB 29 disc

  I want to shrink the C drive in 30 GB and want to do at least 3 drives more. I also have linux in the D drive.

  so when I want to shrink C drive, then it shows the size of available shrink space in MB 212653 and total size after shrink 219284MB. This means that my C drive will at least 219284MB. but I don't want that.

  Another problem, when I tried to create a new simple volume the following error comes.    You cannot create a new volume in this unallocated space because the disk already contains the maximum number of partitions.  What can I do?

  The existence of files across the disk will limit the amount by which you can reduce the volume.  You can defragment to reduce this, but there will always be property files that will create a limit for you.  I had to do a full install in a 70 GB partition for Windows CE - with my first attempt to install, I could not it less than 250 GB even if I tried to partition when installing Win7 had finished.

  I think you'll have to decide a complete reinstall to resolve the issues, but that's just my opinion.  During installation, choose the option to partition the drive & set it to create a partition that is not less than 70 GB and Windows will install fortunately in this.  You can then use the rest for a partition of data user files.

  You don't mention your brand of PC, but even once, as Palcouk said, you will have some facility in order to safeguard the partition image factory of the manufacturer of the PC in DVD or USB [Dells certainly have the USB option for this].  Fix this before whatever it is that you will destroy this partition when reinstalling and might also do so just try to move partitions.

• Cannot create instant when quieced cbt enabled on Windows server vm

  Hello

  yesterday I updated my ESXi 5.5 to 6.0 test environment and now I got the problem that my backup software cannot create a snapshot. So I tested and same trough VCenter can't cerate a snapshot of the quieced. I got this error message:

  Fehler beim Speichern Snapshots: msg.snapshot.error - QUIESCINGERROR.

  In the vmware.log I read a lot of mistakes, here are a few:

  Could not open the file change tracking "/ vmfs/volumes/54aea31d-61d81d56-35f9-000423ba9740/srv01-Domaincontroller/srv01-Domaincontroller-000002 - ctk.vmdk ': invalid followed change or drive in use.

  Node 19095c-cbt cbt creation failed with the error can't allocate memory (0xbad0014, out of memory).

  Could not set vmkernel change Tracker: monitoring ESXi filter failed (0x143c). Drive will be open, but follow up information changes vill be invalidated.

  Could not repair the disk signature writable snapshot 'scsi0:1 '.

  Snapshot 62 failed: impossible to suspend the virtual machine (31).

  When I stop the virtual machine, remove the ctk files and modify the configuratoin of the virtual machine for:

  ctkEnabled = true (or false)

  scsi0:1.ctkEnabled = false
  scsi0:2.ctkEnabled = false

  Then I can do an instant downturn. The false to the scsi0:x is important. When I switch back the configuration I can't do an instant downturn again.

  This is the case the following OS:

  Windows Server 2008 R2

  Windows Server 2012

  R2 Windows Server 2012

  I can also cerate a snapshot of slowing to a virtual Windows 8.1 without problem computer and a Linux VM.

  I have already created a case at VMware, but the defender was looking a bit, gave me a tip that does not work and told me that there nothing more, he can do it, because my Supermicro motherboard is not on the supported list.

  This I don't understand, we are a partner of Enterprice of VMware, I want to test the new version in my test environment before I install this at a client. Now, I had a problem, and it seems that VMware will not help me because the motherboard is not ' t supported! But this is not like a hardware issue to me.

  Here is maybe someone who has the same problem or can made a test what happens when you turn on the cbt for a virtual machine.

  Kind regards

  Stefan

  Patch is available: http://kb.vmware.com/kb/2116126

• When you try to launch Lightroom 5cc message Lightroom cannot create a catalogue to local disk. cannot save changes to this place. any help please

  When I try to open Lightroom 5cc on my pc I get the message "Lightroom cannot create a catalog name of the catalog Lightroom 5 volume disk Local C because Lightroom can't save the changes to this place" I just upgraded to Windows 10 and worked fine on windows 7. Any help please?

  Hi bill.hughes3,

  Can you make sure that the images on your local disk folder has full read and write permissions and then try to create the catalog?

• ORA-39080: cannot create queues during the backup from the rman catalog

  Hello
  I am trying to upgrade my database 10 g and 11 g and I'm trying to back up my rman catalog. However, I get an error. Can someone help me please-
  
  That's what I give-
  nohup expdp DIRECTORY = EXPORT_DIR userid=rman/adc1243@rmandb full = y job_name = full_rmandb_upg_exp DUMPFILE=EXPORT_DIR:rmandb_upg_exp%U_20100618.dmp LOGFILE = PARALLEL EXPORT_DIR:rmandb_upg_exp_20100618 = 3 &
  
  and I get this-
  
  Oracle @ < progd1 >: / home/oracle $tail f nohup.out
  ORA-31626: there is no job
  ORA-31637: could not create user RMAN FULL_RMANDB_UPG_EXP work
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ORA-06512: at "SYS." "KUPV$ FT_INT", line 600
  ORA-39080: cannot create queues ' KUPC$ C_1_20100618202950 ' and ' KUPC$ S_1_20100618202950 ' to Data Pump task
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ORA-06512: at "SYS." ' KUPC$ QUE_INT ', line 1606
  ORA-04031: unable to allocate 56 bytes of shared memory ('pool feed', 'unknown object', 'pool feed', 'set the allocation callback')

  ORA-04031: unable to allocate 56 bytes of shared memory ('pool feed', 'unknown object', 'pool feed', 'set the allocation callback')

  04031, 00000, "unable to allocate %s bytes of shared memory (\"%s\",\"%s\",\"%s\",\"%s\")"
  // *Cause:  More shared memory is needed than was allocated in the shared
  //          pool.
  // *Action: If the shared pool is out of memory, either use the
  //          DBMS_SHARED_POOL package to pin large packages,
  //          reduce your use of shared memory, or increase the amount of
  //          available shared memory by increasing the value of the
  //          initialization parameters SHARED_POOL_RESERVED_SIZE and
  //          SHARED_POOL_SIZE.
  //          If the large pool is out of memory, increase the initialization
  //          parameter LARGE_POOL_SIZE.  
  

  Stream uses system global area (SGA) memory to store the information required to capture and apply. To allocate memory from the SGA for use by water courses, establish a flow pool in the SGA by specifying the STREAMS_POOL_SIZE parameter. The default value for this setting is 0, which means that the stream instead uses the shared pool memory. If you leave the STREAMS_POOL_SIZE to its default value (0), water courses will be considering using up to 10 percent of the SHARED_POOL_SIZE, then Oracle recommends at least 200 MB for the STREAMS_POOL_SIZE parameter. The source and destination databases must take account of this memory in the SGA.

  Published by: sb92075 on June 18, 2010 19:17

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• Executable file cannot create files

  I created a VI that creates files in its operation. It downloads files via FTP and also creates a config file, if it does not already exist.

  When I ran the VI without building in an application everything has worked well. Now that I have built in an application, he cannot create any files at all for some reason any.

  The strange thing is that it doesn't throw any errors. Part of my application FTP receives a list of files in a directory through then a loop using the 'get' vi file it draws in the FTP in the Toolbox of the internet. The for loop to zip right through the list of files without having to download them, but acts like he did download them. Its supposed to wait until it downloads or expires. As I said though, nothing in the VI can create all files. I'm trying to create a configuration file, but it is not created.

  I am even dealing with the case where when I use the 'VI path.vi current"from a stand-alone application, it will send a path like c:/directory/myprogram.exe/currentvi.vi. I analyze it to the directory of the real executable without a hitch.

  I am running XP, not vista, so it's not like I need to run it as an administrator or something. I'm puzzled. I hope that I have adequately described the behavior of this problem for you guys.

  Hi Rex,

  before installing all the drivers (unnecessary):

  Have you checked all the wires of the error? Especially in the creation of your program file section? All messages of that?

  Can you show your code (a light at least version)? You can replicate the problem with an example vi?

• Cannot create the folder on the storage device

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  =====================================
  The dialog box you received usually indicates that there
  are too many files copied to the root directory of the
  flash drive.

  The solution is to remove one or more pictures and
  create new empty folders in their place... then move
  all the photos in the files... problem solved.

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798