cannot depend on a printer

Similar Questions

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• Windows cannot connect to the printer. Access is denied.

  From: Steve

  Desperately, I try to print from my laptop Windows Vista Home Premium to a shared printer on my home wireless network.  The shared printer is connected to a XP Home machine.  This machine is wired (via a LAN cable) to the wireless router.  I can 'see' the printer that I want to use but trying to to connect to it. I get the error message "Windows cannot connect to the printer.  Access is denied. "I would be grateful for any help.

  Kind regards.

  -Steve

  From: Alan Morris [MSFT]

  Since the XP machine is HOME, I don't think that the permissions dialog box is accessible.

  Run the XP network sharing wizard again and see if it affects safety correctly on sharing.

  Is the printer you share one that has drivers provided with Windows XP?

  In the meantime we will at least get the printer works for you.

  Create a local printer on Windows Vista; Creation of a Local Port in the form \\XPMACHINE\Printsharename (this will send the files by using the redirector instead of the RPC service).  Install the Windows Vista driver for the device.

  You can print because print$ access is required for printer drivers.

  -Alan Morris

  Windows printing team

  Another response of the community of Windows Vista discussion groups

• Some incoming e-mails are too small and cannot be read during printing. How can I change before printing?

  some incoming e-mails are too small and cannot be read during printing. How can I change before printing.  I did once, but forgot the steps. Thank you.

  original title: the font size of the mail received

  You use Windows Mail? It uses the same print as THE engine. For print size: IE | View | Text size | Carry out the adjustment.

• Printer problems. Error "computer cannot communicate with the printer.

  I had problems to access Windows Explorer and the rep Dell IT installed Mozilla Firefox 4.0 Beta 10 for my Windows Vista as an alternative.  Now my Dell AIO 946 printer does not work.  Whenever it is fixed, it prints until I am notified to download an upgrade of the system.  After that I downloaded the upgrade, the printer does not work yet.  The ink cartridges will not align.  I get a message of "remove stickers ink", which is clearly not the problem because the cartridges are not new.  Now, I get a message that says "computer cannot communicate with the printer.  I re-installed the printer several times, disconnected from the power source and the URL and re-connected.  Nothing seems to work.  Any positive advice will be appreciated.

  grandmainontario,

  You can copy a document under the glass? B & W and color?

  If so, executing delete print jobs to remove items stuck print jobs in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Download the Vista drivers.

  Install the Vista drivers. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

  You will find links to the patch/drivers to...

  Reference Dell 946 Photo all-in-One Printer owners thread (W7)

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  You can also read...

  You cannot print or preview before printing a Web page in Internet Explorer 9

  Rick

• Cannot depend on Security Center "the Security Center cannot start."

  I'm afraid that my computer may not be protected because I cannot depend on SecurityCenter, would appreciate any advice, thank you very much.

  Original title: when I try to activate the Security Center, I receive a message saying "failed to start Security Center" can someone tell me why?

  Hi Bluehound,

  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?
  • You have a third-party security software installed on the computer

  Step 1

  First of all, check if the Security Center service is set to automatic and started. To do this follow the steps below:

  a. Click Start.

  b in the start search box type services.msc and press to enter.

  (c) in the services window, do scroll down to Security Center.

  d. right-click on it and click Properties.

  e. check if the startup type is set to automatic, otherwise it is set to automatic.

  f. click on the Start button, this will start the Security Center service.

  g. click on apply and Ok.

  Check if you can enable the Security Center.

  Step 2

  If the problem persists, you can also try to temporarily disable third-party security software on the computer and try to check if you can enable the Security Center. If you are able to start, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the boot options. cannot depend on a windows Defender

  Cannot change the boot options. error message says "Windows Defender is disabled". cannot depend on windows Defender.

  If you use Norton, McAfee, AVG, MSE etc., they will be either disable or conflict with the Defender.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  For questions of security program, kindly ask in the Security Forum.

  See you soon.

  Mick Murphy - Microsoft partner

• Add Printer__ Windows cannot connect to the printer. Access is denied

  Laptops have just loaded with Windows 7 Pro on my domain. Try to load printers to a print server. Print server running Windows 2003 R2.

  When I log in with a user profile, I go to devices and printers------click Add a printer-network printer select------I see a list of printers on the print server - choose the printer that I want to load------asked if I have confidence in this printer - click install drver------opens window files Coping - green bar moves as if it were loading drivers------then just before you get to the window asking if you want to make a default printer. open window that says - Connect Add Printer (X RED) for printer Windows cannot connect to the printer. Access is denied

  Changes to device settings to allow the user load the drivers. Check the security access (everyone has permissions) for this printer on the print server.

  Disable UAC control on the laptop. Group Policy has changed restrictions point and print.

  But this same user can log on to another computer on the network, which has loaded XP Pro and can load the same printers that are denied with windows 7 pro

  As a network administrator, I can log on to laptop computers and load A B and C printers.

  So I can log on as a user and then I can load A B and C printers, but as a user I want printer D I get the same message as above.

  Thank you in advace for your help

  This is the solution I received and seems to work.

  You have to go into the local group policy on Windows 7 computers, and not on the server.

  Go to the Group Policy:

  Computer Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

  User Configuration\Administrative Templates\Printers\Point and printing Restrictions ss SET TO OFF

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Error print spooler "Windows cannot connect to the printer.

  Plug in the printer and I left the pc automatically download the drivers and the printer name is recognized, and then when I try to print I got this message "Windows cannot connect to the printer. Local printer spooler service is not running. Restart the spooler service or restart the machine.

  Click Start, type: Services

  Press enter

  Scroll down and select the print spooler

  Click on restart or play button in the toolbar.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• "Windows cannot connect to the printer. The print processor does not exist.

  I am trying to connect to a printer on my home network.  LaserJet 1020. Who lives on a different computer on windows 7.  It works fine on his 'home' of that Win 7 cannot connect to the printer. but when I try to network I get this message.  "Unable to connect to the printer. The print processor does not exist.  I downloaded a new driver from HP without success.  All of the suggestions.  Thanks in advance.

  Print processor which is using?  Properties of the printer, Advanced Print processor.   See if changing to wil Winprint allow the connection of the printer. Note the current so you can change back if required. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Windows 7 Windows cannot connect to the printer error

  Hi, since a few days ago I was connected to a network printer and everything was fine. Today, nothing works. I removed the printer thinking that would help (and I could go out and find him), BAD!

  I click on add a printer > add a network printer > select the network printer and get a box that says: I need to install a driver from the other machine, then I make him trust, etc blah blah blah, click OK and then get this error.

  Windows cannot connect to the printer.

  Operation failed with error 0x000003e3

  Both machines are running Windows 7 x 64.

  I googled all night with no solutions. Please help, I need to be able to print! Thank you!

  I solved the problem. I had to join the homegroup computer, was too attached to the printer. Once I did, he saw the printer and installed the necessary driver. I can print now!