Cannot depend on the DV5000 wireless capabilities

Similar Questions

• Equium L40: Cannot depend on the wireless Lan card

  I tried to turn on my abilities wirelesss using FN + F8 as shown in my manual, however when I run a search for wireless connections to repeatedly get a message saying that the wireless features are not lit and it fails to correct the problem.
  I use an Equium L40.

  Any help much appreciated.

  Hello

  I don't really know what you're doing wrong. The fact is that WLAN card must be turned on in the same way on all Toshiba laptops.

  At the first switcher WLAN to on the situation and after doing this light WLAN must be turned on. After you do this using FN + F8 key combination and make sure that the WIFI is enabled.

  So now you should be able to use the wireless network on your laptop card. Open ConfigFree application and choose RADAR to locate the WLAN in your area.
  I do the same on several laptops at home (old and new models).

• Satellite A30 - cannot set up the binding wireless modem

  Hello
  I have a satellite a30. I just upgraded to broadband and cannot configure the WiFi wizzard. the modem is working perfectly thanks to threads, but cannot set up wireless despite my efforts! Please can someone help?
  see you soon
  Claire

  Hello

  What's the problem?
  You are not able to see the thread or what?

  Are you sure of the laptop and built-in wireless network card?

  Remember that the WiFi card is optional on the Satellite A30 and not all models includes the Wlan miniPCI card
  Thanks for posting more details!

  PS; If the laptop supports a WLan card internal, you should check only that steps;

  -Check if the WLan adapter is enabled on the laptop. Activate the switch on the side of the laptop and the FN + F8 key combination!
  -Check if the windows own WLan configuration is marked
  -Be sure that you use the right WLan encryption and whether encryption is supported by WLan modem (router) and wireless network card
  -Check if the standard 802.11 WiFi, B or G is accompanied by WLan modem (router) and wireless network card
  -Make sure that the router MAC filtering option has been disabled!

  As you can see all of these options are important to connect to the wireless LAN.

• HP OfficeJet Pro 8610: Printer cannot connect to the new wireless network

  I got the OfficeJet Pro for a while and everything worked very well (including wireless printing from my Mac and iPad AirPrint). Yesterday, we got a new Modem Router (from Ubee). As I tried to connect the printer with the new network, I fail miserably.

  Here's what I've tried several times: on the small screen of the printer, I select: Network Setup > wireless setting > Wireless Setup wizzard. The printer seems to networks, find the network and asks me the password, I get the password (I did this several times, so no typos!). The printer then "trying to connect to the network"... then it crashes: for a very short moment, I get a blue screen with a white error code (not always the same, for example.) B3FF3802) and then the message "error in the printer, turn off the power, then press.

  I turned off the printer and turn it back on several times (incl. pulling out the power plug and restart after a while), but when I go through the steps above, but I just get the same endresult.

  I deleted the old network as I feared it might interfere with the creation of the new network. No noticeable effect.

  I printed the "results of the wireless network test," which confirms that "your HP printer is unable to connect to your wireless router. In the results of the diagnosis, he states that 'network name (SSID) was found - Fail.

  I quite understand the message that the printer detects the network and shows good SSID / network name. I thought to enter the SSID manually but can't find where I could do.

  I'd be very grateful for any suggestions on what could be the problem (I can't imagine that the printer would not work with a new router... I searched the internet and found stuff on 'Hello compatibility', but do not know which is the issue I'm facing.

  Thanks for your help!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• After installing winows xp SP3, cannot connect to the network wireless at home

  My daughter has an old windows xp pc. I have a USB wireless adapter attached to it to our wireless here at home. When I install SP3, the network card does not connect to the network.  I have uninstall xp3 to make it work. I even reinstalled the software for the card after xp3 installs, and it still does not work. What can I do about this problem?

  Go wireless adapter manufacturer and obtain an updated driver, then it should work. If the manufacturer does not, for a search on the Web.

• printer offline depending on the laptop wireless

  When you attempt to print from laptop wireless dv6 HPavilion indicates Photosmart 309 a printer offline.  Printer shows connected to the router

  Hi storybook.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I'll be happy to help you.

  I have provided a document for "Printer is off-line" Message appears on the computer and the printer does not print to see if we can solve this problem.

  If you still have questions please provide the results if we can quickly understand this.

  Thanks for posting on the HP Forums.

  Good day!

• Vista - limited - connectivity cannot connect to the internet (wireless)

  Hello

  Okay, so my situation here.

  I can not connect to internet on my Dell Inspiron running Vista. It happened about two weeks ago. I have an Intel Wifi Link 5100 AGN.

  I know for sure, is not my router or my wireless laptops. I can run Linux (on a flash drive, no dual boot) just fine and it recognizes everything perfectly. It doesn't matter if I'm at home or on campus. I can not connect anything.

  I suspect I've changed some settings, like all the it started happening shortly after that I was playing with the Linux CLI. When I booted into Vista, I could not connect.

  I tried Googling and can't find a clear answer. Maybe my DHCP or IP settings are confusing? I think I have to delete some registry keys, or something... not too sure.

  I tried this:

  http://support.Microsoft.com/kb/299357

  Nothing helps.

  Any questions of clarification let me know. Thanks in advance.

  RootCommand

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the Dell Web site > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Officejet Pro cannot install on the laptop wireless

  Try installing a new HP8600 ProPlus.  I configured the wireless to the printer, and it is connected to my wireless network, has an IP address and an intense sound signal.  When I try to add this printer to my laptop (I tried now many laptops), it can not find.

  I uninstalled the driver software and downloaded from the HP website - reinstalled, etc..  I rolled power the printer itself.

  I see a lot of posts on this problem, but you see not all the good answers.

  I worked today with HP technical support.  We ended up having to change the channel on my router 1 to 11.  Once we did that, I was able to connect to the printer.  Once this is done, I was also able to connect from my iPohone via AirPrint.

  YAY! 1

• Cannot depend on the network discovery and streaming media

  I use Win7 Pro., SP1.

  Some time ago, the I realized that I can not use home network more. I can't turn on my discovery of home network and streaming media. The network discivery always returns OFF.

  The following services are all on (automatic): support TCP/IP NetBios and DNS Client, Function Discovery Resource Publication, SSDP Discovery.

  Please notify.

  Hello Dudi,

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing because of the discovery of the network and streaming media problems. I'm going to

  certainly will help.

  Network discovery is a network setting that determines if your computer can find other computers and devices on the network and whether other computers on the network can find your computer.

  This problem can occur because of incorrect network discovery and streaming media settings.

  For network discovery, I suggest you use the steps in this article and check if it helps.
  Reference:
  You can't turn on the discovery of network and Sharing Center in Windows Server 2008, Windows Server 2008 R2 or Windows Server 2012
  https://support.Microsoft.com/en-us/KB/2722035
  (Also valid for Windows 7)

  For media streaming, refer to the suggestions of gifted xI replied on 24 December 2010 and check.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-turn-on-media-streaming-another-Windows-7/b765ec7a-8c7a-4147-8645-fedc3a5fc991

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Cannot print using the printer wireless HP 6500 E 709n after changing of Internet service provider

  Original title: I changed my internet company two weeks ago, HP 6500 E 709n since then my printe r series does not work, it has been connected wireless, can you help me.

  I changed my internet company two weeks ago, HP 6500 E 709n since then my printer series won 't work. He was hooked on the wireless, you can help me. Must the printer be reconfigured? If yes how to reconfigure?

  Hello

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

   

  After the change of the internet society, the wireless printer does not work.

  Quick questions:

  1. are you able to to connect to the wireless network?

  2. do you get any error messages when you try to print?

   

  The problem may be with the drivers.

   

  I suggest you to visit:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  You can get the printer drivers on the site:

  Software & Driver Downloads - HP Officejet 6500 Wireless All-- One Printer - E709n in

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3795406

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

• Cannot depend on the automatic updates in all available domains.

  The control panel / Automatic Updates, or security or System Center.

  See all the options in the form of low light (not selectable)

  Is there a way I can fix it (turn on) automatic updates?

  Yes, I'd just put up a new computer... the problem disappeared the next day morning.

• My Norton 360 Security Center management difficulty, cannot depend on the anti-virus monitor. After you have reinstalled the drivers of network accidentally deleted__, eternet connection

  body in title...

  Hi gettaclue2002,

  · What is the service pack installed on your computer?

  · You have another outside Norton Security software?

  Try the methods below:

  1. I would say that you stop and start the service on the computer Security Center.

  a. Click Start, click Run, type services.msc in the Open box and then click OK.

  b. in the list of Services (Local), click on Security Center and then click Properties.

  Make sure that you stop and start the service, then check if the problem persists.

  2. you can also uninstall and reinstall Norton Security software, and check the results.

  Link, please refer to: download and run the Norton removal tool to uninstall your Norton product:http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot depend on the discovery network and media streaming in windows 7

  I have recently reinstalled windows 7 because that... Well, it was long due, my laptop for about 3 years now and still had the original installation on it. But this time every time when I try to turn on my network discovery he constantly changing to and in my home group when I click on choose media streaming options and try to turn on media streaming it dose nothing, I looked at about 20-25 different sites/forums and followed the guide on here it is turn on and set to automatic

  o computer browser
  o Client DHCP
  o customer DNS
  o network connections
  o knowledge of network locations
  o remote procedure call (RPC)
  o server
  o support TCP/IP Netbios
  o workstation
  and a few others that I found as switch function Discovery Provider Host but still nothing, even uninstalled my A / V AVG, turned off my firewall altogether and also tried to get into safe mode with networking, I tried to leave my home group and join, tried to change an active home to work and even public network but still not good.
  I mainly use this function to listen to music from my laptop to my Xbox then play the games, but if my Xbox can't locate my cell phone so I can't listen to music, using windows media center, it works I can listen to music, photos videos etc, but that's all that is not of a any real use to me.
  My laptop is a fujitsu Siemens, I have a Wi - Fi connection with my laptop and Xbox, but have you tried Wired, the Xbox can find my laptop ok MOM, she can't find my cell phone no more.
  IM at the end of my rope here I really don't know what else to do to reinstall my windows in the hope that it work that I really want to avoid, especially if it still does not.

  Right, I discovered how to activate my network discovery and multimedia streaming, I solved this problem when trying to leave my home group, and he wouldn't so let me google and I found this link http://www.sevenforums.com/network-sharing/23571-cant-leave-homegroup.html where he says to check

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall
  services, only 1 of which has not been started and set to automatic has function Discovery Provider Host & Upnp Device Host so I changed it restarted now my settings be saved, left the Group House and each reflection works well.
  Then maybe add additional 1s in this list the standard response that is sent to these issues.
  Thanks anyway for the help.

• Laptop cannot prinit to the printer wireless

  I have a laptop running Windows 7 64-bit. I could print for months.  The printer is an all-in-one HP 210.  When I try to print now I get "error - printing" in printing (QC) other devices in the House can print to the same printer without problem.  I can get the status of the printer from my laptop, print a test page, printing information network on my printer through my laptop, etc, but when I try to print from any application, I get the same error.  I tried to remove and reload the drivers and the printer SW, nothing works.  Thoughts?

  Something to try.
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• Cannot depend on the virtual machine after reboot

  Hello world

  Thanks for reading this post.

  My version VM ESXI4.1.0, 348481.

  Here's my problem:

  One day my VM was hanged, and I tried to restart.

  After the reboot, it can be turn on. And I tried to remove the inventory and to recreate the virtual machine.

  However, I can't find the. VMX file in the data store.

  So I tried to create a new virtual machine and put the files in this folder, but it can also work.

  Please see the capture screen, (http://clip2net.com/s/2aNUG)

  Could someone give me guidance and advice how to solve?

  Thank you very much.

  According to the latest vmware.log file, you have tried to access one of the files base/flat with a wrong header file (40 GB)! This hopefully not bad data on the virtual disk. In any case, I've recreated the missing files (see attachment), so you should be able to redo the work of the virtual machine. Because the vmware.log file did not help, I've recreated the instant chain according to the timestamps of the delta file.

  Please follow it below mentioned steps exactly to avoid problems in case something does not work as expacted:

  • Make sure the flat files as well as files 2 6 delta are still in place (not renamed,...)
  • remove the virtual machine from the inventory of the host (right-click-> "Remove from inventory") ESXi
  • delete the temporary/second .vmx unless there is a special need for it
  • Download the files from the .zip file in the folder of the virtual machine on the data store
  • Click right newly downloaded virtual machine's .vmx file and choose "add to the inventory.
  • create a new snapshot (this is important!)
  • Turn on the virtual machine

  If something is not or you have questions, please send back before moving on to the other steps.

  If everything works as expected you should consider the 'Delete All' snapshots in snapshot Manager. This will release not only almost 200 GB of disk space, but can also improve the performance of the virtual machine. Because the size of the snapshot, remove snapshots may take some time, probably in hours!)

  André