HP Officejet Pro cannot install on the laptop wireless

Similar Questions

• OfficeJet Pro 8600: Officejet Pro 8600 unspecified on the laptop

  After the most recent upgrade Microsoft 10 (29/09/16), my laptop won't recognize not the Officejet 8600.  No problem with the printer before that. The list of the laptop the printer as Unspecified. OfficeJet bought 18/02/12. Is there an Officejet Pro 8600 driver needed?

  Thank you

  Hello @dhzz,

  Thank you for your response.

  (1) the printer EWS must appear on the browser before moving on to the next step. Please make sure that the printer and the computer are connected to the same network. If the SAP is not displayed, it means that the printer and the computer are on different networks. Get IP address and enter in the address bar of the printer. The image below is an example for a printer EWS. Please note how the IP address is entered (marked inside the red rectangle).

  

  (2) the link I provided was a 'and' added in the end. So try the address without 'and': http://ftp.hp.com/pub/softlib/software12/COL40129/bi-108860-3/OJ8600_Basicx64_1315.exe

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Printing HP Officejet Pro 8600 stuck in the queue - Wireless Intermittent

  We have a HP Officejet Pro 8600 (CM947A) that we used it for several years without problem.  I use the version of Windows 7 Professional 64-bit.  We have two PC that print wireless.  There were several days of work began to get stuck in the print queue of the printer for both PC to print.  I can cancel the printing of the queue, but the next task will be stuck again.  I print Microsoft Word documents contain a single sentence.  The problem goes away if I restart the printer, but the problem comes back the next morning.  I have re-installed the software print and changed the channel on the router on channel 8 that uses the null in the region.  The printer firmware is up-to-date.  The HP printing software and doctor Scan has not solved the problem. The indicator on the right side of the printer's pale blue wireless is enabled when the problem occurs.  When print jobs are stuck in the queue, I can not connect to the printer by typing the IP address in a browser window.

  This problem has been resolved by the above phone support number.  We have solved the problem by changing the encryption on the router to WPA2 to WPA + WPA2.   The router is a Belkin Wireless G Plus MIMO Router P57746-B.

• OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

  I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

  I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

  I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

  Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

  However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

  The Win7 PC is plugged into the router.
  The printer wireless to the router.

  ipconfig on the pc gives Ethernet card details below.

  So basically I have no idea what I'm doing...!

  ==============

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
  IPv4 address...: 10.0.0.249
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.2.

  Router config.

  

  Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

  It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

  I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

  Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

  I'll try to report in the next few weeks an update about the stability of connection network printers.

  UPDATED: May 23, 2016

  And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days

• OfficeJet Pro 8610: Install the HP software

  Hello!

  I have a HP Officejet Pro 8600 and a HP Officejet Pro 8610; When connected to my wireless router.

  I have a new laptop Lenovo with 10 windows and I want to know if I need to install two (8600 and 8610) Officejet software under Windows (to print and scan) or if the installation of the will (most recent) software only Officejet 8610 let me print and scan on both devices (8600 and 8610)? I also use the "scan-to-network-folder" on both devices.

  Thank you.

  Hello

  You need to install the software and drivers for both and you can select the default (primary) and the other as secondary.

  Kind regards.

• Use of printer OfficeJet Pro 8500 crashes with the message "printer busy."

  I have a HP OfficeJet Pro 8500 (909 a) that connects wireless as well to the Terminal Airport and the MacBook Pro, but when you try to print from the MacBook Pro (running OS X Tiger 10.4.11), MacBook Pro print job displays a message "printer is busy, try again in 30 seconds".  Network is configured with DHCP router 10.0.1.1 (gateway) with printer to 10.0.1.2 and MacBook Pro to 10.0.1.3.  MacBook Pro can traceroute and ping gateway and printer, the network printer in the test passes.  HP software is installed and running by USB cable between the printer and the laptop.  No idea why the print job hangs after running?  HP printer was installed from preferences Print & Fax as an IPP printer.

  Hello

  Try to add the printer to print & Fax HP Jetdirect-taking rather than PPI, then check all difference.

• HP OfficeJet Pro 8600: Scan - disable the 'Save' button with MAC OS 'SIERRA '.

  Hello world

  I have an Officejet Pro 8600 installed in a Macbook pro.

  After having upgraded to Mac OS Sierra (10.12) 'Save' button in the HP scanning software is now disabled when the save screen appears. Save documents are possible using the 'Test' option in the menu "Preferences".

  It worked fine with the latest version of 'El Captain'.

  I've searched for scanning HP new version for Mac OS Sierra, but nothing.

  Someone has any idea how to solve this problem?

  TKS in advance.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• get error 0 x code 80300001 windows cannot install on the specified location

  try to install vista on a new hard drive on my computer laptop hp dv6810, but get the error code 0 x 80300001. Windows cannot install to the specified location.

  the installation program recognizes my hard drive, we'll format me and partition but will not be installed. im not that well informed about computers then be simple and detailed with your answer. Thank you.

  Hello

  (1) you are able to change the settings in the BIOS?

  Check the below link that can help you in the matter of fixing.

  http://support.Microsoft.com/kb/925481

  Also to ensure that material supports the installation of Windows Vista on your computer.

  Hope this information helps.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• Paper textures Adobe pro cannot install module: general error message. Help

  Paper textures Adobe pro cannot install module: general error message. Help

  Hello Stephen,

  If you have upgraded your version of Creative Cloud Deskop App in the last 24 hours (to build the 2.1.1.110), you may experience installation problems with some modules that contain the locale specified in the MXI product. I believe in that paper textures Pro has a which may explain the error message.

  Please note that we are aware of this problem and are working on a fix so please bear with us for the predictable a few days until we iron out the bugs and problems arising from the new version. Sorry for the inconvenience caused.

  During this time if your Adobe applications are still on the 2014 CC or MORE (i.e. you have not improved their 2015 CC) then you can select the method 'install another way' described in the troubleshooting step and download the ZXP which allows to install by using the extensions Manager, as before.

  I hope this helps.

  Krystal

  -Team - Add-ons

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• Printers HP B110a cannot communicate with the laptop, but both will be connected to the router?

  OK, here's an interesting problem that has been banging my brain for hours, one of my friends has a HP Photosmart all in one printer B110a. Now I can get the printer to connect to the wireless router, no problem. Can I also have the phone to connect to the router, the problem is that the printer cannot communicate with the laptop. The router brand and model is the Linksys wrt54g

  Now, I took my friends laptop home and tried to see if she could detect my wireless printer model different on my router which is a TP WR340GD I went in devices and printers, and went to Add a printer and Add Printer wireless, it instantly detected my printer via the wireless network. There is no problem on the side of the laptop. I am sure that any firewall on the laptop was turned off when I tried the connected printer.

  So now I have my friends printer here with me and decided to try and see if I could detect the HP Photosmart printer All In One Printer on my laptop on my TP WR340GDwireless router. Yet once, it worked perfectly and it has detected the printer and works wireless without fault.

  I'm down now to the conclusion that the problem is with my friends router Linksys wrt54g I'm gone in the settings of the router, change the wireless channels, changed security between WEP and WPA/WPA2 and AES AND TKIP wireless and this does not solve the problem.

  I can access to the Photosmart B110a: the Web server integrated in a browser ONLY if I have the laptop to the router physically connected by Ethernet cable when trying to access my router from a friend, but I can access through wireless on my router. The problem is probably something very simple that I forgot, but I was more all I can think that I tried to reset harder than the printer cleaned the network settings on the printer as well from the display of the printer menu.

  I'm really lost now, someone at - it suggestions?

  Hey pcwizard, ok, I checked the router settings and Mac filtering turned on, so I decided to reset the router, it restored to factory settings. Re-Setup wireless and once again I tried, still had no luck with the laptop to communicate with the printer.

  in any case, I decided to connect the cable from the printer to the laptop and took the USB to wireless Assistant. As I reinstalled it the printer using the wired method.

  He told me that the rules of traffic incoming and outgoing firewall stopped communication between devices and assign port numbers 427-9000 etc.. However, I had turned off all firewall, Windows and Norton 360, which since then, I've replaced with a better anti-virus software.

  I went into the settings of the router, port forwarded the application numbers, tried again and is again no luck. I'm usually pretty good with computers, but it was really annoying me. So I went and had a coffee and a brainwave came and I decided to see if my laptop could detect and connect the printer to the router. As soon as I tried it, he finds and the printer has detected immediately.

  Then I thought there must be something on my laptop to friends who may be at the origin of the problem, when I looked, I noticed that my friend had the old software Vodafone Mobile Broadband running in the background which was connected to the router.

  So I closed and turn it off and tried again adding printer. SUCCESS now detects it and the printer is now communicate and respond with the laptop. I'm guessing that the Vodafone Mobile Broadband have a built-in firewall blocking the communication. However it is strange because it worked without problem on my printer at home, so I wonder if some how blacklisted broadband Vodafone IP address of the printer at a time on their router.

  I'm so happy, it's finally done, a lot of hours and work, and after all this time it was * beep * Vodafone.

  in any case Pcwizard I thank very much for trying to help, no doubt has given me a few ideas.

  Thanks again!

• Error: "Windows cannot install to the selected location. Error: 0 x 80300001. »

  When I try to install Windows 7 on my Toshiba computer formatted I get this error message after trying to install the RAID driver during the installation process:

  "Windows cannot install to the selected location. "Error: 0 x 80300001.

  I'm unable to proceed with the installation. Can someone please?

  Hi Jon,

  This error can occur during a clean Windows 7 install the operating system installation media is not in the drive. This happens usually when a user is necessary for the exchange of discs in order to install the necessary drivers on the system and the operating system disks were not placed in the drive before proceeding with the installation.

  The error would not occur if the Setup program has been started using a USB key as stable media would not be switched.
   
  The solution would be to change the driver CD or DVD of Windows 7 install DVD media when this happens, then we can continue with the installation of Windows 7. In this particular case, it is likely that the RAID driver disk has been left in the drive.

  Note: This problem/error appeared less in Windows Vista since a message asking to specify the installation media usually as follows:

  "Please insert the disc 1 installation of Windows.

  Dan