Cannot eject unknown 'removable disk (i) '.

Similar Questions

• Cannot install Silverlight error: the component that you are trying to use is on a CD-ROM or another removable disk that is not available.

  Original title: Cannot install siverlight wants cdrom

  When I try to install from a download of Microsoft Silverlight, I come me next survey on my screen:

  The feature you are trying to use is on a CD-ROM or another removable disk that is not available.

  Insert the disc of "Microsoft Silverlight" and click OK

  Use source:
  Installation of Microsoft Silverlight 1

  I killed the associated files of SilverLight with REGEDIT.  In Add or remove programs to audit, it has returned.

  Please help as I can't watch videos COMCAST without installed.

  Frank K.

  Hello

  I suggest you go to the link below and post your question in the Silverlight forums for help on this issue.

  http://forums.Silverlight.NET/

  Hope this information is useful.

• Cannot click on "Remove hardware" to eject external drives in the system icons tray

  First of all, it's not the usual problem whereby Windows refuses to allow me to eject a flash disk because it is in use; My problem is different.

  I can't really top click (left or right). It applies only to this icon - all others, including the management of power, wireless, bluetooth, etc work fine - touchpad driver I can click on each of them. It is very annoying, because instead of this, I have to go to my computer to eject the flash drives, which is clearly more hassle. I see no reason why this happens no matter what light you can throw on this issue would be appreciated.

  Should I reinstall the USB drivers? If so, what are those who control the external drives...?

  Note: the actual usb drives work well when connected.

  Hello

  Yes, the 3rd link is a bit complicated for Vista or Windows 7.

  Check this box:

  How can I remove hardware safely in Windows 7? (via the shortcut)
  http://windows7themes.NET/how-do-i-safely-remove-hardware-in-Windows-7-via-shortcut.html

  -------------------------------------------------------------------------

  See if this Council of Ronnie Vernon applies:

  Check the following policy.

  In Windows 7, you can set the strategy of quick deletion for an external USB device. It doesn't disable the setting cache file for the device that allows to bypass the component to safely remove.

  1. plug the device into the USB port.

  2. open the Windows Explorer, click on the device in the navigation pane , and then select the properties/material tab.

  3. Select the device in the list and click theButton properties , click theChange settings button.

  4. Select the policies tab.

  5. Select the option of rapid withdrawal .

  6. click OK/apply/OK.

  Screenshot:

  http://i196.Photobucket.com/albums/aa86/rvmv/QuickRemoval.PNG

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/d62556d2-b858-489D-a34f-0ec767b873f4

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• removable disk does not detect

  Hello

  I'm having the problem with the removable disk. In accordance with the instruction given, I installed USB 2.0 successfully. But also I receive the statement as "in the Insert the diskette into the drive. My unix is detection of card reader. But not able to access all data cards (Transcend - Fuji Film & Mobile memory card). Please help on this. I have important messages to this topic.

  Hi Steve,.

  ·         If it works much earlier?

  Try the following.

  Method 1: Run the next Fixit tool and see if it helps.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the article mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

• How to make bar selection of removable disk (e :)) back to where it was?)

  I can't get my digital camera to upload photos. Section that is used to take info out of the disc [disc removable (e :))] yhe went where it was somewhere in an area unaccessable. He moved and I can't get it back.  My driver discs are not load into the pc.  They have been read by [disk removable (e :))] how can I move this area where he was buried there?

  I'm new to computers, will you? When I was in school they always used an abacus.  It damaged my pc if I pushed the wrong button to make this disk drive to move to an unknown area?

  [[[[[In the box that wants me to select the type of disc driver he used to have a list like this: 1] 3 1/2 "disc 2] drive the other 4] removable 3] D (f) disc and disc 5] removable (e :)).   The TWO removable disk E & F have been taken out of the box of choice and moved somewhere else.  How they return to their original state?  Thank you.

  GREYBIKER

  You see the camera in "My Computer" as a removable drive? Is it still E:?

  -pa

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. 'Removable disk' Questions

     1. I have 100 photos stored on my 'removable disk I:' that were imported from my memory card.

     As "removable drive I:" is separated from my C: drive, this means that these 100 photos are just too much space, too much space on my hard drive the drive when the memory card is connected, or no space is being made regardless of whether or not the memory card is plugged?

     2. when importing photos from a memory card and click 'Import', why is there not an option to choose which of the 100 photos of important in the desired folder, if I don't want to install all of the batch of 100 photos?

     3. because importing photos "saves" in the i drive: removable, why is the memory card must be connected to each time to access the I: drive?

     Windows XP enabled me to 'choose' that 100 photos to import by placing a check mark next to them, so it's all new to me.

     Thanks in advance.

     Yes a temporary cache file is created every time that windows Explorer opens almost anything

     It's just the way computers work, he can't see what it cannot be cached.

     AutoPlay gives options to do all these things, including import

     You can also do it manually if you do not use autoplay

     Simply click on the Start button and the computer

     Connect the device, and then click to open it

     Computer will list the devices usually under the name of it or removable storage or mass storage.

     Already done.

     After that copy / paste / cut-and - paste / drag-and - drop what you want.

  8. How do I change my USB Flash drive from a hard drive to a removable disk

     Been having a lot of problems with my laptop lately, then I'm just trying to move some basic data (music, photos, etc.) my laptop on my desk. When I initially plugged my Flash drive (brand new, no problems with it, was sold yesterday. 16 GB) on my laptop, it installed the drivers successfully but no it has not assigned a drive letter. After going to management records and trying to assign it a letter, he would enter an error code. So I grew up diskpart.exe and assigned a drive letter that elsewhere, BUT, for some reason, he now thinks it's a partitioned hard disk drive and I can't eject it (and therefore, it will not save anything when I unplug it).

     When I plug the drive in my desktop, everything works perfectly fine. He acknowledges as a drive Removable and all. I even formatted it on my desktop (with 'quick format' unchecked) yet when I plug in my laptop, it has the same files on it as before when it was plugged into my laptop.

     To plug into my office and loading upward from diskpart, after typing the volume from the list and pressing on enter, I have noticed that my office it lists as "Removable" type (when I do this on my laptop, it lists as "Score" type) so how can I change to a removable drive?

     EDIT: Looking in the "Disk management" folder in "Computer management", it shows my flash drive in the framework of the "disk 0" and my C drive and it lists as "Primary Partitions.
     Below, under "Disk 1" it shows my removable disk, but when I right click it, and then click on "Change Drive Letter and paths...". «it comes up with an error stating ' operation failed to complete because the disk management console view is not updated.» Refresh the view by using the refresh task. If the problem persists, close the disk management console, then restart disk management or restart the computer. »
     (I updated using the update task, I close the restart disk management console, as well as restarted my computer.) Nothing works)

     The most frustrating thing is that I have a small 1 GB flash drive and it works completely and perfectly fine on my laptop.

     The answer this question (http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-disk-management-console-view-is-not-up-to/e96ccbf9-0f6e-40ce-999f-4da4e05d7704) actually solved my problem. Thanks for your time though!

  9. Cannot eject the USB device.

     Cannot eject the USB device. I don't see the icon to safely remove in the task bar.
     I tried to run the following path, but not luck.

     (C:\Windows\System32\rundll32.exe shell32.dll, Control_RunDLL hotplug.dll)

     The icon is hidden behind the small arrow in the lower right of your screen.  Click on that, and you will see a number of icons, which one will remove safe material one.  Be aware that unless you have a removable USB device connected, the icon will not be there.

     Good luck.

  10. iTunes does not recognize my ipod touch but my pc it shows as removable disk

      iTunes does not recognize my ipod touch but my pc it shows as removable disk

      First of all:

      iTunes: fix iPhone or iPod not detected Windows 10

      Then, try

      iPhone, iPad, or iPod not recognized in iTunes for Windows

      -I would like to start by

      Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

      or

      Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

      -New cable and another USB port

      See also:

      iPod not recognized by iTunes windows - CSA

      Troubleshooting problems with iTunes for Windows updates

      -Try on another computer to help determine if a computer problem or iPod

      NOTE: you need iTunes 12.3 and in need of Win 7 or a later version.

  11. Drive external HARD identified as removable disk

      Hello
      I have the Toshiba 593500 - B 750 G external hard drive and I can't access my files stored on it. It's a USB 3 drive.

      When I plug it I get the added device, but the drive appears in my computer as a removable disk and I can extract is no longer my file.

      The drive activity light does not light, but the car turns.
      I tried this drive on several different computers with the same results.

      I changed the drive letter, the same result. I uninstalled the drivers, the same result.

      Help, please.

      > I have Toshiba 593500 - B 750 G external hard drive
      What HARD drive you exactly, because this isn t number I known

      Another question: could you access the HARD drive and the files in the past?

  12. Portege M400 - XP Setup cannot detect any HARD disk

      Hello world

      I have everything, what I can and can't try. During the Installation of Windows XP cannot detect any HARD disk.

      PORTEGE M400 PPM40E-0DG0253I
      BIOS 3.8

      Installation of Vista properly with RAID, but XP installation drivers won't work for all that. I try a lot of drivers (versions even for Vista), with integration of nLite, with SD-start 16-bit back, DriverPacks. I bought no change - disk-USB, the laptop cannot see HDD. I try also with the USB-SATA external enclosure, but this without success, but I can see the HARD drive

      Any ideas?

      Somehow you lack driver SATA.
      Very good description how to prepare the CD of facilities, you can find HERE.

      This Toshiba document could be useful for you:
      http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

      If you have any other questions please let us know.

      Good luck!

  13. Clock set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system ARDAgent.app has been changed and cannot be repaired by disk utility. Files repaired permissions

      As soon as that connected with the password, the clock is set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

      Am also using Firefox 43.0.3 browser like Safari.

      'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

      You can ignore the above.

      Utility disk - permission errors, you can ignore

      System preferences/Date & Time/Date & time - is it set to automatically set the date and time?