Cannot export DVDs even - internal software error

Similar Questions

• Internal software error of LabVIEW FPGA Module - 61499

  I get the error next (in a pop-up window) in the phase of sompilation for the FPGA target with a vhdl IP. This error continues to occur even after restart LabVIEW and the PC. Someone at - it solved is this kind of problem before without having to re - install the software?

  Here is the error information:

  Error-61499 occurred at niFpgaXml_GetValue_String.vi<><><><>

  Possible reasons:

  LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support on ni.com/support.

  Additional information: lack the tag required XML (/ CompileServerList)

  As a first step, I can compile the vhdl IP node successfully. However, once when I'm running a VI with the FPGA, the bureau stop working. After that I restarted by force, it cannot perform the build of a vhdl IP node. Even without connecing to the jury of LabView, he pointed out errors before the end of the sompilation.

  Interestingly, the screw which also includes nodes IP vhdl that I properly compiled before, I can still run the VI to the Commission and it works correctly.

  Thank you

  Looks like your ActiveJobsList somehow has been corrupted. I saw occur when computers are hard stop or blue screen during compilation. I don't have that LabVIEW 2014 installed on my machine, so your path will be a little different, and the file extension will be a .txt or .xml instead of .json, but try this:

  Move the file "C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\rvi\CDR\niFpgaActiveJobList.json" (or your equivalent) out of the above directory (back it upward and delete essentially) and restart LabVIEW. Must regenerate the file and resolve the problem.

• Continue to receive the Error Message: internal software error: internal software error: line 332

  Try to burn a DVD and I get an error message. The full message is:

  internal software error: / Volumes/versions/Amawat/Main/XcodeProjects/AuthorCore /... /... / Ulator/TitlePlanner/CVOBUPlanner.cpp Sonic, DVDCreator, FormatLib, Vob, line 332

  Don't know what that means. Was working fine this morning, came back and kept getting the message. I even got a new project from scratch and rebuilt everything and still get the error message.

  Help, please.

  What version of yet?

  The chapter on each other or too close to beginning or end markers?

  Several videos on a timeline?

  If this isn't the case, you use the dynamic linking?

• Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support

  Hello

  I work with card 4461.

  When writing the data on the card I get this error

  The channel which has been set up had

  Update rate: 9210

  None of the samples: 87643

  Sample mode: finite samples

  Sync: Synchronization with AI0 even of the same device

  The values lie between 6 V and 1 .2V

  error occurred in the function .

  {Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}"

  The Stack Trace:

  «to nNIMSSAIL100.StatusObserverT<><>otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\\,_STL::allocator\\,nNIDMXS100::tLocaleConsideringWideStringComparitor\\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName) \r\n

  to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.StatusObserverWrapperT<><>otNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.WriteotNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\n

  to nNINETAI2005100.Write1DotNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::array^ > (task task, Double [] buffer, UInt32 numChannels, UInt32, UInt32 numSamples lines, Double timeout, Boolean autoStart, Boolean interlace) \r\n

  at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n

  to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n

  at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n)

  at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n)

  at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n)

  at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n

  to System.Threading.ThreadHelper.ThreadStart ().

  TargetSite:

  {Void nNIMSSAIL100.StatusObserverT<><>otNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\, nNIDMXS100::tLocaleConsideringWideStringCaseForcer > *)}

  I am using VS2005 c#

  Please tell me what wroing

  Kind regards

  Alok dandois

  Hey Alok,.

  This error code means that the revision of the map is more recent and not yet supported by the driver.  That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx.  Try upgrading to the latest version of DAQmx and try again.

  While you're there.  See if you can find the product ID located in Device Manager (if you are using Windows).  Once in the Device Manager, right click on the device and click Properties.  Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id".  It should look something like PCI\VEN_xxxx & DEV_xxxx...  Paste in a reply in this thread can I be sure of your problem.

  Germano-

• FPGA internal software error

  Hello

  I'm under LV 2010 SP1, I don't know what version of the FPGA module I have, but I think it has been upgraded during the SP1 update.  The error is less.  It refers to two of the four globals, I use communicate a FPGA timed to a non-timed loop loop.

  My code has compiled since the upgrade, but not since the addition of the globals...

  I'll appreciate any help on this.

  Roger

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: nirviUIDToObject.vireference object get error for UID. All the analyzed text:
  -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11906Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4622Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'41C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11905Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'
  -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21

  Snip...

  Unfortunately, even if you can guarantee that the written word never happen at the same time if you write only once per carton, LabVIEW FPGA currently only has not the ability to position the system globals arbitratio for multiple entries on the diagram can cause this error.  What I would say is that you write the overall each iteration of the loop outside the structure of the case and that he wire simply the value on a tunnel on the structure of the case.  This will allow you always change the value each time through and will eliminate the error of code generation.

  If you want to send your comments about this particular use case of LabVIEW FPGA R & D, I would recommend that you post your idea in the Exchange of ideas of LabVIEW FPGA.

• internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217 creating menu

  I'm doing my DVD menu, but when I try to preview, it gives me the error message: "internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217".

  I can't build my DVD either because of this.

  This happens only when I add an image to a submenu page.  My main menu has a picture about this and he isn't wasting, but when I have another menu page which is linked to the home page and add the image about it, it gives me this error code.

  Someone at - it tips?

  Looking at this post (Re: internal software error:.\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217 ) in the thread you point, here's what I think is happening in your situation. Note that there are other issues that take this same error, particularly in slide shows.

  When you use a fixed image for a menu background, it goes in the background layer in the psd.

  When there is a video (bottom of movement), still replace the background with video layer.

  The query tab has a place for video and audio. If you put an image (jpg, for example) in the option video, apparently, when still calls, it throws this error.

  Your workaround solution, create a video out of the still image, will work, but all you have to do is change the menu in photoshop and add the image instead of the bottom layer.

• Internal software error in PE9

  Hello

  I'm trying to 'share' a project.  I'm looking to make a DVD.

  I'm not having much luck.  Whenever I hit the button burn the following series of events takes place:

  It seems succesfully encode media because once this process is at 99% for a few moments, he goes to the media of compilation.  At the moment where he is compiling media he recorded 95%.  It takes a few minutes to up to 99% and then I get the following error:

  Internal software error: vobulator\blockplanner\block planner.cpp, line 215

  Anyone have any idea what this means and if yes, how can I solve this problem?

  Some information:

  The file is large (at least compared to what I usually do)-55 minutes of mpeg2.

  My computer description is:

  Dell Studio XPS 435MT

  Intel Core i7 processor

  920 @ 2.67 GHZ

  8 GB Ram

  64 bit

  Thanks for the help!

  Try initially "burn folder" to see if it's PRE or a problem with your burner or media.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• An internal software error occurred. Error code 8. LabVIEW: File permission error.

  I just changed a few contasts to controls in an FPGA core program, so there need to be recompiled.

  but it after compiling the program showed the error.

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error 8 has occurred to copy in nicrio_StockOutputVhdlAndInstantiation.vi-> nirviGetInstantiation___cRioStock_io.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.
  =========================
  NOR-488: Error detected DMA hardware.

  C:\NIFPGA86\clntTmp\TensionCo~65_FPGATarg~A7_FPGABase~A1_eogs1jH0~18\Crio9426IoNode.vhd

  Ca person the reasons for which he showed an error.

  

  Hello

  I have a few questions,

  1. If you redefine your controls with constants, that you always get the same behavior?

  2. what equipment you try to deploy to? If it's a cRIO, have you formatted your controller and reinstalled the software for it?

  3. I did a little research and it looks like a potential problem may be with firewall/antivirus. Here is the document that explains that:
  http://digital.NI.com/public.nsf/allkb/D8D46FD4DBD1015786257540003B2DC6

  You have an antivirus installed on the computer? You can try to disable it and rebuild the bitfile?

  Kind regards

• LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

  Sir/Madam,

  Note Labview 2012 SP1 installed about 2 weeks ago.,.

  Accident occurred during the compilation of an fpga vi who worked satisfactorally in the past.

  When I restarted and went to the message recomplile "LabVIEW FPGA: an internal software error in the LabVIEW FPGA Module" see attached picture of popup.

  I reinstalled Labview in its entirety and backed out the changes I made to the vi but still get the same message.

  Thanks in advance

  Daryl

  It turns out that the question was in the VI and not of LabView FPGA module as the message may indicate. I created a vacuum vi, cut and pasted items in this from the vi error and recompiled and it ran very well.

  Somehow the vi has been corrupted internally.

  Thank you it's fixed.

• FPGA an internal software error occurred. writing of memory

  Hello world

  We encounter an error during the compilation of an FPGA VI. It is probably related to our use of block FPGA memory. We have a non-timed while loop which is reading a host-target FPGA FIFO and writing in memory block (inside a Subvi called z_scan_write.vi). In another loop (this one is timed loop), there's a Subvi we called z_scan_read.vi, within which read us of the memory block.

  Does anyone have an idea what goes wrong and how to avoid this problem? Thank you very much in advance for any suspicion!

  The full error message is as follows. Note that this is for the two subVIs z_scan_write.vi and z_scan_read.vi...

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:
  nirviUIDToObject.vi
  Error getting of to the UID object reference.
  All the analyzed text:

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  We could solve the problem. It was actually caused by the fact that we had set some subVIs to not reentrant. Their semifinal implementation (with the option to clone preallocate) solved the problem.

• Internal software error error-224606 in MIO

  Hello

  I get this error-224606: "internal software error has occurred in the MIO software. Please contact National Instruments. »

  It happens when I try to use the DAQmx controls Task.vi to abandon a task that awaits a digital triggering of an analog acquisition that has no time-out.

  I'm using LabVIEW 2010 sp 1.  My version of DAQmx is 9.2.3.  The camera I use is a DAQPad-6016

  When I was running this software on a USB-6251, I had no such problem.

  All solutions?  Thank you

  Hi pgaastra,

  Hmm, the error you see certainly seems buggy and should be the subject of an investigation.  However, I'm not sure about the validity of the abandonment of a task in the middle to access the DAQmx Read.  There is a better way to achieve your final goal.

  The easiest way is to simply ask the number of samples available.  You would then only call DAQmx Read after there is a number not null samples available.  See the code attached below.

  Best regards

• Internal software error PrE11 burn to DVD

  Reference Dell Quad processor C:250GHD (pre here) D: 600GHD w / free 400 G (project here).  Converted from 60 movies of 13 minutes (avg) Reg 8 & 8 Supreme via projector, movie converter, Pyro has / V Linc, in computer in an AVI file.  Now burn to DVD with menu.  With the help of 5 files at a time. always less than 1 h, with main Start Menu & Stop markers on each clip file.  Do not spend time editing, use only the Smart Fix on all files.

  Some burn very well, but some give me the following error after that 99 percent complete on burn progress bar:

  "Software internal error: \Vobulator\Block Planner\Block Planner.cpp, line 215.

  There, it will stay frozen until I have the stop, restart and sometimes I restart and it completes the burning process, and sometimes he repeats the error.  It takes about 2-3 hours to find out.

  Can you tell me what it is?  Maybe I can avoid something.

  The error of Vobulator told me that things are bad, just at the end (as your % indicates), and it has to do with the progrma is not able to create the necessary video DVD structure.

  First thing I'd do, look to see if you have to stop at the end of the timeline marker. If so, remove that and test again.

  Good luck

  Hunt

• Cannot export from Acrobat Pro DC - error that says not enough disk space

  I am running Acrobat Pro DC in Win7.  When you try to export a .pdf file in a .png image file, I get the following message is displayed: "error trying to write to the file.  This may be due to insufficient disk space.   I tried to export 1) a network drive, 2) a local drive and 3) Player of cloud, but without success.  I have a lot of space on each.  Help, please.  Thank you, Mark

  Hi marka25245057 ,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  Also after opening Acrobat, go to the Help menu and repair the installation.

  Try this: -.

  Open a PDF in Acrobat

  Go to file > export to > Image > JPEG

  Save as dialog click on the settings button in the lower part

  In the color management pane

  Click on the drop down to RGB

  Select Off & Ok

  Save the file in JPEG format

  If the problem persists, please check with the different user account to reproduce the problem.

  Kind regards

  Christian

• Cannot export the movie - unknown compilation error - Help!

  I edited a 32 minute film in first items 10, and now I'm trying to export it.  At any given time during export and it seems to vary, I get an error of unknown compilation.  I tried to export the movie from last week and all I get is same failure tried almost everything what I found written on how to solve this problem.

  I have Win 7 Ultimate SP 1 running on a desktop Lenovo with an Intel Core 2 Quad CPU 2.67 GHz, 4 GB of RAM, 32 bit proc.

  First is installed on drive C with 6 GB of free space system.

  Project and scrach disks are on drive D with 165 GB of free space.

  The multimedia files are on 2nd drive E with 50 GB of free space.

  Project and most of the material source is NTSC DV - there are quite a few photos with the movement, as well as some iPhone HD video on the timeline, hundreds of clips in all more narrative, some titles, etc.

  Export destination is the D drive.

  Will be made to the green lines at the top of the timeline (sometimes it stops during rendering and I have to keep hitting Enter to continue rendering, but ultimately it's all green)

  So far I have tried:

  -Reinstall EP 10

  -Reinstall Quicktime

  -Copy all the photos on their own separate folder

  -Editing of each photo a little (apart from PE 10) and re-register to make sure that none of the pictures are corrupt

  -Empty the temp folder

  -Removal of all renders and cache files and let them rebuild

  -Export of small pieces of the timeline to try to identify a bad clip - it is a maddening process and I found a clip that is generating the error, but I managed that export to AVI and re-import and replace it on the timeline.  It would be very nice if PE would just TELL ME what music he loves not if in fact it is a mistake to clip.

  -Turn off the shadow / highlight the functionality I had on some clips, but it wasn't the issue, more small sections with these clips exported correctly

  -Tried to export in different formats: iPad Vimeo SD, MPEG, DV Standard, Standard of high quality AVI - all result in the same error (the format I want incidentally is SD Vimeo)

  -Reboot the machine and transform everything that could possibly consume memory

  This machine has never had any problems for export in the past.  One thing I tried worked - installed 10 EP on another machine (less capable) of Win 7, and fed all media via an external drive.  The other machine made fine export (though it took awhile because it is low-powered).  Is nothing more than a work around edition even though, as I don't normally have access to this machine and I haven't.

  I'm at the end of my mind!  What else can I do to get this movie file to export?

  Appreciate help or clues which allow you to solve this mystery.

  Ouch! 6 GB of free space on your C drive? This is no doubt the bulk of the problem!

  RID another 20 GB of free space on your C and then defragment the disk and it's probably your problems with go away.

  Assuming, of course, you resize your photos, by note of the Bill.

• Cannot burn DVD get a 0XC0AA0301 error code

  OT: 0XC0AA0301 error code

  I get an 0XC0AA0301 error code when burning DVDs... Windows7

  Hi mr.mubark,

  I suggest updating the firmware of the player by downloading the latest version from the manufacturer and installation.

  You can also update the chipset drivers for the PC from the manufacturers Web site.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.