Cannot find a home network - G60-630US

Similar Questions

• Windows cannot find any additional network?

  I am currently using my laptop that can connect to my home network but my PC can't. My PC can't find no additional network. It says it is connected to the network called 'Network', but I can't use my internetor all programs using the internet. It says "windows cannot find any additional network." I clicked on "Diagnose why windows cannot find any additional network", it told me to update my drivers and my drivers he's was updated. Can someone help me?

  Hello

  You can check the link below and try the advice given and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-cannot-find-any-additional-networks-an/ca9f086b-42A5-46E5-b894-92c009f8eba8

  Hope that information was useful

• Windows cannot find any additional network / an unexpected error has occurred

  I got this new PC Windows Vista Home Edition x 64 SP2 and I need to connect it to the network wireless in my house because that the router Netgear DG834GT wireless broadband is not very conveniently placed for wired connectivity. I have a Netgear WG111T USB wireless adapter which works fine on my other PC / laptop (XP & Vista, both 32-bit), but I can't make it work on my Vista x 64 PC.

  I have installed the version of the driver 2.1.0.26 x 64-compatible for the WG111T and the device works correctly, according to Device Manager.

  When I try to 'connect', I get 'Windows cannot find any additional network . " While the other PC at home can pick up 3 wireless networks.

  Go until the network & sharing Center, then manage the networks without wire, then Add, then manually create a network profile, I get "unexpected error ."

  I spoke to Netgear who insist the player WG111T is compatible with the x 64 visits.

  I talked to my PC provider who suggested to try the adapter on another PC Vista x 64 to see if it works there. Problem is, I don't know anyone else with a Vista x 64 PC.

  I would be extremely grateful if someone can help me before on this one. Thanks in advance for all advice.

  See you soon,.

  Arty-W

  It seems that the problem was caused by ZoneAlarm Internet Security Suite hinder and prevent the correct installation of the Netgear wireless driver. My problem has been cured by following the advice of daouda wire - see http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/58716eca-80cb-4555-a1f4-bd4e5350aeb4

• CNV cannot find variable on network

  I start my exploration of the network (NVC) with examples of variables.  Excellent examples.

  Using the project of polling stations, I have the program running on a PC writer.  On another PC, I have the player running program.  I modified slightly so that the path of the network would be selectable by using the sample browser project.

  The drive cannot find the variable network writer.  The browser popup (where the player is running) is the PC that hosts the writer program.  So it's good, in the sense that it checks the two computers are on the same network and subnet.

  But in the browser, the tree is not all associated network variables.  This seems to be a simple problem, but I can't find.

  Also, if I run the application Reader on the same computer that hosts the application to the writer, this popup browser detects the attached network variable.  So, I know that on the same PC, writer and reader work.  Just not on my network (which is kinda the whole point!)

  Here you will find two documents that I have found useful when configuring the network variable scenario:

  Software configuration and firewalls hardware to support National Instruments products

  LabVIEW static Variables through Windows 7 firewall

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• WINDOWS CANNOT FIND ANY ADDITIONAL NETWORK (DIAL-UP AND VPN) OTHER THAN THE WIRELESS NETWORK

  ehmm I just installed nokia 6600 pc suite on my computer so I can access the internet on my computer through the usb cable. Installation and drivers have been installed correctly. I can access the internet on the handset but when trying to connect to the internet via USB with the computer "I get a message that windows cannot find any additional network." Its really disturbing that I can do to fix this. Can someone help me please.

  Even if a USB device, it does not create a new network connection for you.  I fear also that you use a regular USB cable - those connections often require a crossover cable (but more on that later and I guess it should work it is how it is advertised).  Go to start / Control Panel / Network and sharing center / set up a connection or network / and choose the first option (you can also check the main page to see if the connection is listed but I doubt it).  Choose to set up a new connection and follow the instructions - ensuring that you enter the correct settings when it is required.  You should perhaps install device drivers, firmware and or software for the device to work properly - read the installation mode (and call technical assistance from Nokia to help you put in place - they know more about what we do and should be happy to guide you through the process and even to set the settings on your computer until you log - that's what I would do in your before circumstane even of) ask for help here).

  To start / Control Panel / Device Manager and check all the new drivers (double clck on them) to confirm that they say that they do not work properly.  Go to start / Control Panel / Add Haedware and have the system check new hardware devices - if it finds, install them (it is perhaps what is missing in this process).

  I hope this helps.  If nothiing suggested I bring, don't hesitate not to contact Nokia for assistance - I'm sure they'll have you place and operate at any time.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• X 250 reports for SCCM 2007 boot disk WinPE "cannot find a valid network adapter."

  I built a 250 X with Win7sp1 Enterprise, used Lenovo System Update to update all drivers, driver and creates a new package of drivers of SCCM 2007.

  I added the driver v 12.12.80.1950 Intel I217-LM to the Boot Image, distributed to distruting SCCM points and created a new USB stick to boot using the SCCM Assistant.

  When I boot on the USB drive I get the message "cannot find a network adapter valid."

  I can use the ignition key on a 240 X without any problems.

  I can see the pilot I217-LM in the boot image. When I connect locally on the laptop, I can connect to a share on another PC, so the driver and connecting to the LAN function. It is only during boot on the key of USB startup problem occurs.

  Any help much appreciated.

  Problem solved.

  The boot image, I added the driver to was "not to inject a ConfigMgr driver", I created a new boot image added three drivers NET from the driver package provided by Lenovo SCCM for X 250 and the laptop can now connect to the SCCM server.

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Computer Vista laptop can't find printer home network connected to my computer (XP) on the network

  Original title: network printing

  my laptop (Vista) can't find my printer home network connected to my computer (XP) on the network. any advice?

  Hi Ihawktoo,

  1. don't you update the printer drivers for Windows Vista?

  2. were you able to print on Vista before with no problems?

  Share a printer requires a few steps.

  Make sure you have shared the printer that is installed on the Windows XP computer.

  Open file and printer sharing and share the printer.

  You can check the following items and check if it helps to solve the problem.

  Share a printer

  Troubleshoot file and printer sharing

  Network printer problems

  Hope this information is useful.

• HP B209a cannot find the wireless network

  I'm running into a problem with my B209a find a wireless network.  I'm not well versed in wireless/network please bare with me.   I have an iMac with OS X 10.8.2.  Recently, I upgraded my router to an Airport Extreme.  My Mac can see the printer correctly, however, the printer cannot now see the network.  Airport utility, I see all our appliances listed under wireless clients and an IP address without a name (printer?).  Doesn't look like not to add manually wireless clients is no longer an option.

  The wireless is configured with WPA/WPA2 Personal Security.  The radio is set to 802. 11A / n - 802.11b/g/n (automatic).  Anyone have any ideas on how to solve this problem?  Thank you.

  1. Printer, restore the configuration of the network printer.
  2. Turn on the radio to the printer.
  3. From your Mac, connect to the network printer called hpsetup.
  4. Open Safari and select Bookmarks-> Show all bookmarks.
  5. Select Hello on the left.  Your printer should appear in the main window of Safari.
  6. Double-click the printer.  The printer's internal web page should appear.
  7. The Green Network on the printer web page tab.
  8. Select Wireless (802.11) on the left
  9. Press start the wizard and follow the prompts to connect the printer to the network.

  This should get back you on your feet.

• Cannot find the home toolbar

  want to remove shop at home, got instructions to uninstall but must find the home toolbar to do.

  Firefox toolbar; Press < Alt > or < F10 >

• Moved from Office Windows 7 from one room to the other and now it cannot find the wireless network

  Hello world

  I have a HP Pavilion running Windows 7.

  He was hooked through the ethernet in a single room.

  I moved it to another room where there was no inflexible access, so I relied on the use of our wireless network.

  Now, the computer will not even find the wireless network.  When I have the help, it says "no available connection."

  In the center of the network, selecting wireless has a red X to the left of the green signal bars.

  At first, I wondered if maybe the computer was in a "dead point" in our House, but I've put a laptop beside him and he found the thin wireless network.

  Any help?

  Update: I tried system restore and tried to stop/resume knowledge network locations, but to no avail.

  Here is the info on my card wireless directly from HP site:

  Original driver for the solutions of Dualband network Atheros 802.11 Wireless Module a/b/g/n.

  I found what I think, it's their website, (http://www.atheros.cz/atheros-wireless-drivers.php), but surprise... they only model # s, my info does not.  Ugh.

• Windows 7 cannot find the HP network printer to install.

  Original title: windows network printer problem 7 and HP

  I just bought a new computer with windows 7.  I have a HP printer connected hard wire t my verizon router.  My old computer running windows xP can find the printer on the network wireless.  My new computer running windows 7 sitting right next to him does not have the printer to install.  I had HP tech support those who are working on this for many hours and they cannot understand it.  I need help with that.  How to get windows 7 to see the printer.  How can you help me?

  It is rare that there is no option to specify an address

  Now that you know the address of printers, you can successfully ping it?

• 5525 printer cannot find the wireless network

  Help

  I'm not good with technical stuff and need help with this problem.  Printer works well before going on holiday - power off, including the CISCO router when we went away--returned and turned on any return, printer will not connect to the router again.

  Have reinstalled router without result.  All other computers, phones, etc. to connect to the router fine.

  Wireless network test that the MAC address filtering is enabled, they suggest however have checked this and it's not.

  Wireless configuration wizard can find the network but it just seems impossible to connect to him.

  Please assume the lowest level of technical understanding when you reply!

  Thank you

  Hi K27,.

  I see that you are having some problems getting your Photosmart 5525 reconnected to your network after just unplugging a bit. I understand that you have your information wirelessly, but I don't want to set a link here which will take you to our HP print and doctor Scan, which can help you check some things on the wireless network.

  Since you already feed the router to bike, I would recommend restoring the default values of network on the front panel of the printer. You'll want to have your printer on the home screen (should say Photo, Apps and copy). On this screen you want to touch the key/tool icon in the upper right corner, then you want to click on wireless and made scroll down looking for default network. Once you click on that it will ask if you are sure and you want to say Yes. Once that is done, I would recommend the router/printer power cycling tips that were previously provided and then run the wireless configuration that you've been already and it should be able to connect at this time.

  That should hopefully fix it for you, so let me know what happens and I wish you a nice day!

• Cannot find a wireless network with my HP Pavilion

  I really need help. I had this problem a couple of times, and every time I had to restart my entire computer and reinstall everything before I could connect again. The computer has no connection with a cable problem, but he says he can't find a Wi - Fi connection. I would really avoid the reboot and restore the computer to a fifth time if I could. I don't know the details of the computer, I think it might be a Touch 14z...

  Hi ImpossiblyOswin,

  Here is a document from HP Networking Wireless and Internet troubleshooting support with a number of troubleshooting steps to try to including buildings in the troubleshooter in Windows. This information you provided was what I was looking for. When you mention reinstall in your first post, what are you reinstall?

  Thank you