Cannot find a software utility

Similar Questions

• Cannot find the software for my ms wireless laser mouse 8000

  Cannot find the software for my ms wireless laser mouse 8000

  I don't know why you posted this in the forum Office XP, so I moved it to Windows XP 'Hardware and drivers' forum.

  You can find the drivers for the Wireless Laser Mouse 8000 here: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-8000

• Installation Wizard cannot find the software for samsung technologies, how to solve this problem?

  I'm not very good with computers and what not. I am using media player 10 I think (I have windows xp) and when I plug my samsung reality screan phone to connect to the computer and the computer does not find my device. He tried to download one software called samsung technology something or other, and he says that it cannot find its location. then he said to retaliate if I know where he is, but I don't have a clue as to what it means. Can someone guide me through this with the limited information I gave.

  Hi Grainger,

  We would require the following details to help you best.

  (1) you try to sync your phone to your computer using Windows Media Player?

  (2) did you get an installation as well as the phone disc?

  (3) what is the exact full error message you get with regard to the location?

  (4) did you connect your device with your computer as soon as possible?

  Alternatively, you can contact Samsung support team for assistance. You can contact them on the link below.

  Online Service Center

  https://www.Samsung.com/in/support/main/supportMain.do

  You can check the version of the operating system installed on your computer using the steps below.

  Operating system Windows am I running?

   

  http://Windows.Microsoft.com/en-in/Windows/which-operating-system

  Your answers are important for us to help you with the issue further. Write us with the details asked.

• Installation of Windows 8.1 HP 15-r014TU laptop - cannot find 3668Microsoft Software License Terms

  I just bought a laptop HP 15 - r014TU, which comes with FreeDOS as I bought a Windows license 8.1 contract a student on campus.

  I used the official Windows USB Setup program to make a USB bootable ISO file. It starts fine, but after you select the installation option, I got an error that says "Windows cannot find the Microsoft Software License Terms. "Make sure that the installation sources are valid, and restart the installation. It looked like this:

  

  How can I solve this problem?

  It turns out that it was a problem with the installation media.

  8.1 for Windows has been installed successfully.

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows XP Backup problem, cannot find the backup utility

  original title: windows xp backup problem

  I have a system with windows xp, I tried to backup the drive c: to the top, when I click on start, all programs, accessories, System tool, I see how to do anything else but up... i back cant find utility backup click on... then save my c: drive?

  Hello

  I suggest you follow the steps mentioned in the article given below to install windows on the system backup.

  How to install backup from the CD-ROM in Windows XP Home Edition

  http://support.Microsoft.com/kb/302894

  Also, I suggest you return the article mentioned below to learn how to use the backup utility.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

• new hardware found box of bluetooth device will not disappear when you try to install. ultimately it cannot find driver software but comes from the habit get off my computer

  I have a box that keeps coming back that it has detected a new hardware - peripheral Bluetooth
  and it won't go away.  If I go through the process of installing software device driver he asks me questions on a disc and if I don't then check the other options and all other options does not work it is in place can not find device driver software.  The problem is that's never on the computer as soon as I turn it on it won't go away don't anyone KNOW WHAT I CAN DO?

  Hello allysoni,

  Thank you for using the Microsoft Windows Vista Forums.

  I just want to check, your Bluetooth device work?  Or it works and you are just be notified?  What brand is your Bluetooth device and what type of computer you are on?

  Have you went into Device Manager to verify that the drivers are all up to date?  Go to start-> Type "Device Manager" in the search field-> select device-> you Manager see no yellow exclamation for one of your drivers?  If so, right click and select "Update".  If the driver is already updated, and then select uninstall.  (You may be prompted to restart)

  If you are not prompted to restart, click again on the device and select 'Install' please let us know status.  Thank you!

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot find printing software for hp6510 for yosemite bk mac pro.

  I'm unable to locate printing to my hp b211a software for my mac pro 6510 using yosemite bk.  Appreciate any help.  Thank you!

  Hi @Esspee

  I found the full feature software and driver for you to download and install on Yosemite;

  Exit the: 2014-10-22
  File name: HP-inkjet ink-SW-OSX - Mavericks_v12.34.39.dmg [1/1, 126.83 M]
  Version: 12.34
  Compatibility: Mac OS X 10.9 & Mac OS X 10.10

  If this resolve your request, please let me know by marking this message as "accept as a Solution. Thanks.If you need help, I'm here to help

  -In support of Movember

• Took a tip for disk diagnostic, but says error cannot find the software code. ???

  After you apply 2 updates, took a "tip" and tried to install diagnostic software.  Software says error not found code. ???

  New HP Pavilion 2500 with Windows 7.

  Hi Roger,

  Regarding the question, it's quite strange that your getting an error message when you try to create a disk diagnostic vision.

  I suggest you follow the link below to create the same and it also gives you the steps on how to use the HP Support Assistant tool as well.

  http://support.HP.com/us-en/document/c02491515

• Cannot find driver/software for D8300 ethernet controller

  I take a dagger that is the right forum for this.

  I get a new system and my wife now uses the XPS Gen 3 I had after installing the card Linksys Wireless in what was in the D8300 she used. I'll have no connection problems with the card wireless in the Gen 3.

  My problem is with the D8300 which I moved in my room and in him plugging the modem cable via the Linksys router to use until I get my new system. It does not connect even removal of the router and connected directly to the cable modem. I looked in Device Manager and there is a problem with ()yellow?) with ' other devices '. Ethernet controller"that would explain why I can't get on the Internet.

  I'm out of my zone of comfort and knowledge now have been unable to find a reference to the "controller Ethernet driver ' (this specific verbiage) CD-ROM resources D8300, nor in the 8300 Dell drivers downloads list. The only thing I can find close to her same is an ethernet driver who, after several attempts / installs, does not solve the problem. Note, the Device Manager Ethernet Controller | Properties shows as not installed - which would explain why I can't connect.

  I'm puzzled. Just to add, I plugged in the CD of Windows XP just in case, the pilot was inherent in XP, but no luck.

  All suggestions and ideas would be really appreciated...

  
  

• The devices plug-and-play USB do not install on XP pro sp3 that new hardware wizard cannot find the software.

  Running XP PRO with SP3 and the latest updates as of 12/14/10.

  Both a logitech M570 wireless receiver USB trackball and cause a cooler hub from the usb port 4 master the new wizard material to search for drivers but ultimately are not found.  Neither disks driver with devices or of are available on the Web sites of the companies.

  I also encountered the same problem with a new sandisk sansa mp3 player recently. It was recognized instantly on another computer running Vista.

  However, I have an eternal hardrive of WD and a recognized on my laptop XP Trendnet USB wireless adapter. In my view, that all have two drivers I installed earlier however.

  In the end, I believe not to be able to use the Plug-and-Play devices despite them being listed as compatible with XP.

  I removed the devices, restarted, nothing helps. Unknown poster USB 2.0 Device Manager hub and 2 other unknown devices.  I uninstalled the unknown devices in Device Manager and do it again, but no change.

  Don't know what other information I should include. Any help please, I'm at a loss what to tackle next.

  Hi pennybrown,

  Follow the steps below and check, if it helps:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

  To create a new registry entry that disables the selective suspend of the USB hub driver feature, follow these steps:

  a. Click Start, click Run, type regedit and then click OK.

  b. Locate and then click the following key in the registry: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  c. on the Edit menu, point to new, and then click DWORD.

  d. type DisableSelectiveSuspend, and then press ENTER.

  e. in the Edit menu, click on change.

  f. type 1 and then click OK.

  Note: This setting affects all USB host controller drivers in the system.

  If the DisableSelectiveSuspend registry entry value is set to 1, the selective suspend feature is disabled. In addition, allow the computer to enable this device to save power power off the checkbox does not appear under the tab for the USB root hub power management.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv7 6163 - cannot find the software for HP TrueVision HD webcam.

  Windows 7. Says online help click Start and type in quickplay. No program is installed. I can start Skype and it works but I'm used to webcams with an application of its own which runs it, not just Skype.

  According to me, Miss me a HP program?

  Thank you.

  Hello

  You should have installed YouCam Cyberlinks (this can sometimes be hidden in the list of all programs in a folder called 'Communications & Chat').  If it is missing, you can download and install this application at the link below.

  CyberLink YouCam Installer.

  Kind regards

  DP - K

• Media Center always asks me to install windows messenger. cannot find software for windows messenger. Where can I find it?

  each visit to the media center reported that (MEDIA CENTER cannot OPEN MESSENGER.  Please install windows messenger. Went to the microsoft site and cannot find the software for windows xp to download. Help

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=edd9bdcf-16b0-4678-9bbd-e9b429296246

• Where to find the software 3G for Portege R500

  I just bought a R500 with built-in 3G and applied the XP downgrade CD.
  I have inserted a valid Telstra 3G sim card, but cannot find the software to establish a modem connection.

  The modem in Control Panel seems not to work OK.
  I tried to install the Software Telstra 3 G for their USB device but cannot control the port where he seeks the modem.

  Clues please?

  Hello

  The software (tool, driver) is available on the European driver Toshiba page.
  You will find below:

  _Novatel MobiLink_
  + The Novatel Wireless MobiLink Communications Software Suite is a family of wireless connectivity applications that link mobile devices with the extended networks (WWAN) wireless to allow quick and easy access to e-mail, the Internet and corporate networks, anytime, anywhere. MobiLink with a wireless device, mobile users can stay productive and connected to clients and colleagues so that out of the office. +

  _3G RF Power Control Utility_
  + This utility is required to configure the power settings for your module 3G +.

  _Novatel Mobile Broadband_ wireless
  + Wireless Mobile Broadband drivers are the drivers and software used to transfer data at higher rates and greater capacity. +

  As you can see everything is available on the Toshiba site.

  Please also check other threads here in the forum about the connection 3 G Broadband.
  There are some posted instruction

• Utility HP cannot find installed CLJ 2605dn

  Mac OS x 10.9 Mavericks

  Color LaserJet 2605dn on ethernet

  • The printer is found and installed by ethernet and I can print to that beautiful.
  • Options and supplies in the system preferences window cannot display the power levels
  • The HP utility cannot find the printer at all (even if I manually enter the IP address or connect via USB).

  Printer device driver is 19.9, version of the HP utility is software updates and 5.19.2 picked up the update from HP and I installed the driver for printer HP 2.16.1 package manually.

  Any thoughts?

  Chris

  Hello Chris,

  I'm the developer responsible utility HP.  Sorry to say that this particular printer was never took care of with the HP utility.

  However, you can print a Setup page that will give you an IP address.  If you type this address into your browser, it will take you and built-in Web server, and it allows you to manage your printer.  I would like to know if you have any problems or have any other questions.

  Mac - Q

  If you have found useful please click the button of congratulations.