My HP Officejet Pro 8000 printer will frequently offline.

Similar Questions

• OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

  Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

  This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

  The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

  Not very well where to go with this, help please!

  Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

• HP Officejet Pro 8000 printer range makes the vertical white lines

  My HP Officejet Pro 8000 printer makes white vertical lines around text and photos.  What can I do?  I use Windows 7.  As far as I can see, the print heads don't need to be changed. Cleaning them would help? If so, how can I clean them? Thank you.

  Hello

  You can try the steps listed in this document:

  Troubleshooting print quality problems

  Let me know if it helps

• OfficeJet Pro 8000 prints multiple pages of the same document

  Info:

  HP Officejet Pro 8000 A809a

  Windows 7 Pro 64-bit

  Last driver and firmware from HP

  When a job is sent to the printer (web, Word, Acrobat, etc.) the printer keeps printing multiple pages of the document.  Sometimes it will print the first page and a second partial page, then it reprinted again and stop at the same place on the partial page.  She does over and over again.  I ran the HP Diagnostic Utility and it was impossible to print a test page, even after turning the power on power off, then on.   Any suggestions, or is * another * bad printer?  The first was sent and replaced, so I think that this model is just a lemon.

  Thanks for the suggestion, but it didn't work.  I tried to reinstall the driver altogether package three times with no result.  I ran the utility programs that supposedly allows you to solve problems, but public services could not even to generate a test page.

  It seems that I finally found a solution, however.  I installed an older driver for MS Vista 64-bit, and that seemed to do the trick.

• HP Officejet Pro 8000 printer - A809a. Drivers not installed

  I have a wonderful printer HP Officejet Pro 8000 - A809a used exclusively as a network printer and works PERFECTLY. Yet, I have errors reported about drivers not installed in device (Windows 7, 64 bit Ultimate) Manager.

  These are:

  1] adapter Multifunction (x 1)

  -Officejet Pro 8000 a809

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  2 other devices (x 1)

  Same as above.

  [3] printers (3 entries)

  -HP Officejet Pro 8000 A809 Series. (This is the only good entry)

  Properties:

  The device is functioning properly.

  -b. Officejet Pro 8000 A809.

  Properties:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver.

  AFTER DRIVER SEARCH:

  Windows could not find a driver for your device

  Try to use the drivers of "OJP8000vA809_Basic_14.exe" has been a failure.

  -c. Officejet Pro 8000 A809.

  Properties:

  As above.

  Disabling or even uninstall these additional entries have no effect on the function of network printer.

  BUT they continue to be replaced after the reboot.

  This situation will affect the perfornce of the computer.

  Any suggestions, please?

  Advance thanks.

  Thanks for the great instructions.

  Now I'm showing only a single instance of the printer asking for drivers multifunction adapter in Device Manager. Therefore, I uninstall and long and shows no return once again.

  One thing FO, this printer is not actually a multifunction type.

  The system is currently NOT error display or ask drivers.

  I'm hopping it will stay like that.

• inside printing with HP Officejet Pro 8000 prints pages out of order

  When you print a 3 page document with my printer HP Officejet Pro A809a print 'two-sided' setting, it prints page 1 to page 3 on the back, then page 2 on a separate sheet. How can I get the printer to print documents duplex in good condition?

  Hello

  You can check the printing preferences and duplex settings, see if you can change the order in this way.

  Set printing preferences and print

  1. In the menu file printing program, click print .

• HP officejet pro 8600: printer will not be used with the document in the queue

  Hi people,

  can someone help me please?

  I tried all the solutions proposed-

  Check connectivity

  restarted print queue

  Remove and then reconnect the printer

  Power reset

  Cancel job again.

  I had this problem before, but something so tinkering with the queue got fine but nothing works all the time.

  I just changed the cartridges...

  No matter what other dieas welcome please

  Ashoka

  Ash,

  I could be wrong, of course; Mac is not liable for the same way as the Windows environment.

  The printer can print when the print queue of the printer is on, ready to accept a job.  If the queue of work, i.e. the service on the printer running print jobs does not print to the printer, the printer will not print the work.

  If the printer on the computer service is not to blame, then you might indeed want to accuse the printer to not receive the work.

  You can check the communication between the printer and the rest of the installation between the printer and the service that sends the work to the printer:

  You could try to put everything back once more - to include your router.

  I hope this helps.

  Maybe someone with a Mac experience can shed light on the issue.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• HP Officejet Pro 8000 Wireless will not be printed with the iPhone 5 s

  This printer as wireless that I bought used printing with IPhone or iPad in 2011 because is not on the list of Air printing devices so I was told by HP to buy a new and as it was not equipped "Eprint" HP app which is there to deal with it will not work. I was talking to sales person to avoid paying, but I can't believe this. There are printers better but makes no cela a throw away. and who wants to buy a wireless printer that used to print wirelessly? Help!

  Hi Hank, there.

  Sorry to hear that you are having a rough go with the printer.

  With respect to the 8000 wireless, I guess you've got a newbie on the phone tech rep. I couldn't understand why they said there is no work around, because I was able to get the older printers with HP troubleshooting documents. Some so that might help:

  1. install the printer on your network (if it isn't already) the software of the printer for a wireless network connection

  2. download the HP Mobile E-Print app for iOS. It should still work with non-eprint printers: https://itunes.apple.com/ca/app/hp-eprint/id299531647?mt=8

  3 take a look at this video tutorial for tips on getting started: http://www.youtube.com/watch?v=l1z1pSC8WHI

  Hope this helps

• HP Officejet Pro X476dw: Printer will print-elements are sitting in the queue, but the unit stops before printing

  The printer starts as it will print but then stops. The elements are sitting in the queue, so they are sent to the printer. I turned on and out and unplugged to reset. No error message. Connection to the local network.

  Hello

  Download and run the utility HP Print and Scan Dr. link below to solve the problem.

  www.HP.com/go/Tools

• HP OfficeJet Pro 8000: No power to my HP OfficeJet Pro 8000 printer

  I was outside for a few days and when I came home had no power light.   Our power went out briefly while I was gone.     It is not connected to a surge protector.

  Hi @Dewey43,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the printer turns is not on. I'll be happy to help you.

  Please follow the steps of the printer is not turned on.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Have a HP Officejet Pro 8000 printer. Had magenta streaks.

  Checked print head magenta/cyan by removing and replace it. Now, after each print job, I get an alignment page printing. How can I stop this?

  As a general rule, if the printer prints the alignment page frequently, then the printer is having a problem of electrical contact with the print heads.  Try to remove the printheads and clean the electrical contacts, make sure that the print heads are firmly installed in the printer.

  Also, check the steps described in the document, found here, to troubleshoot when a printer prints an alignment page frequently.  I hope this helps.

• OfficeJet Pro 8000 print head

  Print head cartridge and start buttons falsh button all at the same time and momentarily. Following aid online - electric disconnection for 5 minutes and turn it on again and hold the resume button when the lid is open I just can't get the cart of the printhead to move his right hand positioning in the middle to remove and clean the print head. What is the solution to this you problem? Is there another way to reset the printer?

  Hi @Steve150951,

  Welcome to the HP Forums!

  While doing some research, it is essentially the only way to get the impression transport move above. You can try to disconnect again, press on and hold the power button on the printer for at least 10 seconds (it drains any excess power it can hold) and then try again.

  If it still does not move, the transport can be taken on something or something could be taken in this regard. This stall Transport document may help in getting it to move as it will advise where to check for jams/obstructions.

  I would like to know how it goes for you

• my HP Officejet Pro 8600 printer will not feed

  All the lights are out on my printer. I tried to unplug, plug is fine, reconnected. Nothing happens. Is there a switch on / off or reset? I've only had this printer for a few months...

  Hello

  I would suggest trying a hard reset with the device. This issue could be the cord powerd.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• HP Officejet Pro 8600: Printer will be not stupid on loan

  There is a problem with the printer or the ink system. Turn the printer off, then on. If the problem persists, contract HP using guarantee

  Just installed black cartridge then this problem

• HP Officejet Pro 8000 A809 will not connect wo USB port

  I have a WiFi with a SSID wireless but I would like to change to a different SSID.  This requires a USB connection and my wii printer not connect to my computer with the USB cable.  I tried several cables and different USB ports,

  Acctually.  If you know the IP address of the printer, you can enter in a web page and pull the top EWS of the printer (Embeded Web Server).  From the integrated Web server, you can change all settings on the new network printer wireless.  Hope that helps.