Cannot find the partition to re - install Windows 7

Similar Questions

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• The system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Hello

  I get the following message appears when I try to start a remote desktop connection (the shortcut target is % windir%\system32\mstsc.exe).

  This used up until one of my pc, including all upgrades of Windows reinstalled.

  It is on a Windows 7 pc with all the service packs and updates.

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  I have a Dutch version of Windows. The mstsc.exe.MUI file is available in C:\Windows\System32\nl-NL

  It was not available in C:\Windows\System32\nl, but after that I copied it on I still get the same message.

  I even copied the entire content of the... \nl_NL folder in the... weather folder and still no luck.

  Isearched the internet for more solutions but nothing has solved the problem.

  Thank you

  John-Pierre

  OK problem solved.

  I ran the scan of the updated and all updates already installed.

  I checked the list of updates installed and already had KB2592687, KB2574819 installed.

  However, when I looked under installed updates, it showed KB2592687 and 3 others in English while I have a Dutch version of Windows.

  

  So I decided to uninstall the updates English 3 so I could reinstall it again.

  "Note that after uninstalling these 3, Remote Desktop already worked again.

  Apparently, these 3 uninstalling uninstalled a lot more, because after a reboot, there were 10 updates available instead of only 3 that I uninstalled). And after installing them and another restart there was even more updates available. Overall, it took three update sessions and restarts all up-to-date again.

  Although the list of installed updates again 3 updates in English, Remote Desktop works now. So obviously something has went wrong with one of the previous sessions of Windows Update.

• The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file. Error 105

  I am trying to install a HP printer.  When I run the setup.exe and click the install, I get the message:

  Setup initialization error

  The Setup program cannot find the installtion languages in C:\ Windows\SysWOW64\InstallShield\SETUP. COVER file.

  Error 105

  When I do a search for the error message I get no results.  So I ask the community if there is a fix or work around this issue.

  Hello

  What version of windows you are using?

  The program is not compatible with your version

  List of limitations in 64-bit Windows
  http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

  To run the troubleshooting program compatibility Troubleshooter

  1. Open the troubleshooting program compatibility Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, type troubleshooting tool, then clickTroubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. Follow the instructions contained in the resolution of the problems.

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot find the 3668Microsoft software license terms [Windows 8 companies]

  I have an image of Windows custom Enterprise 8 13 GB (with office, UI, apps and Lenovo customizations specific apps/drivers pre-installed, also auditioned the build to create a standard set of tiles of App in the splash screen for all users by using the sysprep copyprofile unattend.xml for OOBE option).  I have split into 4 files 3.6 GB stormwater management each [also tried files more small sizes 1.8 and 2.5 GB].  I copied them into the sources folder.  I renamed the file install.wim OEM install.wim.oem to avoid that it is deployed.  I created my autounattend.xml file and copied to the root of my key USB FAT32.  I need the FAT32 to install UEFI mode, so formatting to NTFS is out of the question.  FAT32 is a file size limit ~ 4 GB, that's why I split the backup.  Flash Player starts in mode UEFI end and autoattend kick-off, however, after that he started the installation process, I get the above error.

  I have tested with the following scenarios.

  #1

  Basic vanilla capture image with some modifications of the user of Windows 8 interface

  Sysprep/audit

  Sysprep/generalize (no unattend.xml file used for sysprep) /oobe

  captured image

  renamed the install.wim of OEM to avoid deploying.

  abandoned the set/3 GB of the file install.wim on the flash drive and using the same autounattend.xml.

  This setup through attempt went perfectly.

  #2

  using the same basic vanilla install Windows 8. WIM image from above, I split the backup into 3 files install.swm and them deposited in the flash player.

  I renamed the file install.wim OEM to avoid deploying instead of my image of stormwater management files

  I get the error above, even as I did using my custom 13 GB great image.

  When a WIM image is divided, why windows has wrong to locate the license terms or I do something wrong?  And don't say that my image is too big ;)  Is it possible to move the files to the conditions of licence in the first installation. Management of stormwater so that they are in one piece, perhaps?

  I did these tests several times trying DISM for capture and split covers as well as imagex and got the same results.

  Furthermore, I am a user of Ghost and since Symantec does not have a ghost version that supports the new UEFI to image partitions yet, I'm learning Microsoft way ;)

  Thank you

  CASE NO.

  You should post your question in the TechNet forum:

  http://social.technet.Microsoft.com/forums/en-us/w8itprogeneral?filter=noreplies

• On Windows XP, I can't install Service pack 3. Keep saying cannot find the specified file and install shut-off valves

  I have re-uploaded service Pack3, about 3 times, each time in the middle of the installation, it gives a message with no error saying number cannot find specified file and stop the installation, I tried to do this with the firewall disabled, and even with the antivirus disabled. I can't use some programs because they require service pack 3. Please help me get installed so I can use the programs I already paid for.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Download Service Pack 3 (SP3) from the Microsoft Download Center if you have any problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  (http://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4)

  Important These service packs apply only to 32-bit versions of Windows XP.

• Satellite C850-1CH - cannot find the wireless drivers to install!

  I recently bought a Toshiba Satellite C850-1CH. The sistem OS is Windows 7. I was able to install all the drivers, except a few strangers that are on network connections and I don't know where to find them! I even tried to search for them via the Windows updates, but not luck.

  Can anyone help me find these drivers: (?) Here is a picture of what I mean: http://oi50.tinypic.com/345zj29.jpg (and Yes, I installed all the drivers needed for the network/LAN/wireless, but I can't find the drivers for those!)

  Here is the list of drivers that need to be installed and of course it Johan be installed in the order given:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth Stack for Windows by Toshiba
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  Check it please this list and install missing stuff.

  WLAN drivers, you can find the portal of Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

  If you have any other questions you are welcome.

• Cannot find the partition recovery on the Satellite A200-1BP

  Hello

  First of all, I have a Vista Home Premium 1BP A200 and I lost the product recovery disc and I want to create one with "Recdisc.exe" product of Toshiba Recovery Disc Creator or Vista.

  They both failed because I didn't get a message "No disk HARD recovery Area!", then I looked in the "Disk management" section and could not find any partition without a name.

  There were two primary Partition which were 1.46 GB 'in good condition (EISA Configuration)"and my Vista (c).
  So, what should I do? Can I create a recovery partition?
  Or can I set the Recovery Disc Creator? (v. 5.0.0.5)

  PS: I got my computer several times with my CD, which probably used my recovery partition.
  Seriously, I'm out of ideas and I don't want to lose 50 dollars just to get another copy of disc PR.

  PS2: I used press '0' and 'F8' thing too, they no longer work.
  Is there a way I can restore without any disk?

  Post edited by: darthbabam12

  > There are two primary Partition which were 1.46 GB 'in good condition (EISA Configuration)"and my Vista (c).
  > So what do I do? Can I create a recovery partition?
  > Where can I solve the Recovery Disc Creator? (v. 5.0.0.5)

  It seems that the recovery of HARD drive partition is missing
  The first 1.46 GB partition is automatically created by Vista and the C partition is the system partition, the partition of HARD drive recovery doesn't seem to be available

  > PS: I got my computer several times with my CD, which probably used my recovery partition.
  Retrieve you the Vista using the recovery disc or what drive did you use?

  If you have installed the system using Microsoft Vista disk then, it was a big mistake because it deleted the partition of HARD drive

  > Is there a way I can restore without any disk?
  Either you use a Vista MS disk and missing drivers, which you can download from the Toshiba page or you order the Toshiba Recovery disk don't see another solution

• Cannot find the printer Laserjet 5100 for Windows 7 driver

  I have a HP Laserjet 5100 printer installed on a computer running XP that is on a network without internet access working group.  I have a new Windows 7 computer to the same workgroup.  I want to print documents created on Windows 7 computer with the Laserjet Printer, but I need to install the printer driver Windows 7 to do this.  The drivers of HP support site says the necessary driver is built into Windows 7, but it tells me it's name or I would like to download it.  Suggestions on how to find or download the driver or what is called?

  Hi micror,.

  Drivers for Windows 7 are only available online through Windows Update...

  If the specific computer is unable to access the web, you can download the drivers from the Microsoft Update Catalog.

  As you the not mentioned your operating system type, you can find the two options below...

  If you are not sure of your type of operating system, follow the steps below:

  http://support.HP.com/us-en/document/c02033168

  For the edition of 32-bit operating system, use the first result, 64-bit for the third or the fifth option (that very of your processor type, wrong that does not...)

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=LaserJet%205100

  To download the Microsoft driver, first add the required file to the basket.

  Then click on view basket and follow the download link...

  Because the packet is compressed, you will need to use any archiver program to extract (for example Winrar).

  Last but not least, as a printer is installed on Windows XP can not be automatically shared with the new client OS you need to add drivers to manually as follows:

  1. After you download the right driver to extract it to a temporary folder.
  2. From the Client (Windows 7) go to printers and devices and click Add a printer.
  3. Select this option to add a local printer
  4. From the port selection screen you can create a new port by selecting a Local Port.
  5. In the port name fill a \\HOSTNAME\Sharename prefix
     • To locate the host name of your HOST computer (XP PC), made a right click my computer and select Properties, the hostname will be listed on this screen...
     • To locate the name of the share go to printers and faxes, click right-click the printer icon and select Properties... Then, go to the sharing tab and appears the share name.
  6. Continue add it an assistant of the printer and the driver selection, click on disk... Browse ocntaining pilots the INF folder from your printer.

  Good luck

  Shlomi

• Cannot find the driver Realtek RTL8187 version Windows 7 64 bit

  I can't find the driver Realtek RTL8187 for my Windows 7 64 bit

  Hello

  Go to the link below and add the full code (IE. RTL8187B)

  http://www.Realtek.com/search/default.aspx?keyword=RTL8187

  If there is no W7 drivers don't try to use a version of vista.

  Slan go foill, Paul

• Connection of database mysql server behaviors, absent, cannot find the disabledfeatures file to install the extension

  I realize that this is a question that arises much, but the only towers work I can find point to the disabledfeatures folder, which is absent in my CC install.

  The biggest problem that I, being a very inexperienced user, is that I can't recognize an alternative method to achieve my needs, which is to return information of request-a database that I can simply display on my page.

  I am more that willing to use any Adobe solution are promoting in lieu of server behaviors, but unfortunately need to a bit of a kick in the right direction to find it.

  Please someone give me a Polish, or help me find the extensions I need to continue with the old method.

  Thank you

  Cheers again Osgood; These will be useful. I'm still looking at alternatives, but have very little experience in the script, but it is useful to know that I have a return to the top with this.

  D

• Error message "the system cannot find the path specified" opening QuickBooks Windows 7 2012

  Receive meesage "the system does not have the specified path.

  Able to open the program on other computers on W7

  * Original title - Compatabiity problems with W7 and QuickBooks 2012?

  Hello

  1. What were the changes made to the computer recently?

  2. were you able to open this program earlier on this computer?

  3 is the issue limited to only this program?

  4. has this program installed successfully?

  Method 1.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 of article to reset the computer to start as usual.

  Method 2.

  I also suggest to go through this article: http://support.quickbooks.intuit.com/support/Articles/SLN43406

  WARNING: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that requires an administrator-level permission. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

  I hope this helps.

• "Windows is unable to complete the installation. To install Windows on theis compuiter, re-run the installation. »

  Got the "upgrade kit" update to Windows 7 for 64-bit to a 64-bit Vista OS. Has made the Upgrade Advisor, enlists Dell first, me Deauthorize Itunes - done, uninstall my printer - in fact, Dell Tools uninstall - made, said, all good, run Windows 7 - has done and, now, I'm on a restart loop. I called Dell, complete scam: they want $269.00 to "software". Read all articles about MS and Dell work together to bring '7' to the end user and the end user obtained just watered.  How to exit this loop of reboot? Widows 7 ran completely and looked at things would happen, then I received the following message: "Windows cannot complete the installation. To install Windows on this computer, run the Setup again. "PC - i7, 8 GB, 1 GB vid, AVG paid version and cannot go back to my Vista OS!  Tried using restore... no good.

  You will probably be able to break out by pressing the top and bottom keys management during the first part of the black screen reboot.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.