CANNOT GET MY PRINT SPOOLER BEGAN,

Similar Questions

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Windows 8 and now cannot get my printer to print. Tried to print a test page, message says "sent to the printer test page", but it does not print.

  I recently downloaded Windows 8 and now cannot get my printer to print.  Tried to print a test page, message says "sent to the printer test page", but it does not print.  Can you help me?

  You have installed the drivers and software for your printer?  Did you go to the printer manufacturer's website to see if they still have 8 available Windows compatible drivers?  If the answer is no, then you must do this before all first I try to print.

• How can I get my printer spooler running I get error 1075 when I try to start it

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you see something like this:

  Cannot start service on Local computer print spooler.
  Error 1075: The dependency service does not exist or has been marked for deletion.

  Error 1075 means "ERROR_SERVICE_DEPENDENCY_DELETED".

  This means that there is some Service think that it depends on to start the Print Spooler Service that is missing.  It's maybe the printing or drivers that have been uninstalled software.

  If really, the dependency service exists and simply not work (dependence, Services must be started and running), you will get an error like this:

  Cannot start service on Local computer print spooler.
  Error 1068: The dependency service or group could start.

  You now or you already had all of the installed Lexmark printers?

  If the Service print spooler used to work well, do you have added or removed all printers since he worked?

  To view your Services, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Highlight the Print Spooler Service, right-click and choose properties you can see what is happening.  You will be especially interested in the startup (generally set to automatic) type and the items listed in the Dependencies tab.

  Always print spooler Service usually depends on the remote procedure call (RPC) Service is running, so if the remote procedure call (RPC) Service is not running, find it in your Services, launch it and set the startup type to automatic.

  If the remote procedure call (RPC) Service is not listed as a dependency for the Print Spooler Service, you can add it.

  You must see what Services depends on your Print Spooler Service, and then restart them (and their startup type automatic value), or if you have the dependency Services listed for items that are more installed on your system, you must inform the print spooler that she needs more of them to start.  Registered Addiction Services that are no longer needed must be removed.

  For example, I said to my Print Spooler Service depends on the remote procedure call (RPC) Service, and also depends on the Service Jose (and of course there is no Jose service).

  When I try to start my Print Spooler Service, I get an error 1075.  It's logical.

  If I look at the Print Spooler Service properties Dependencies tab in the applet Services however, it does not list the Jose Service as a dependency, but if I query the Print Spooler Service broken from a command prompt, I can see what ir really depends on to start and it looks like this:

  [SC] GetServiceConfig SUCCESS

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STARTUP TYPE: 2 AUTO_START
  ERROR_CONTROL: 1 NORMAL
  BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
  LOAD_ORDER_GROUP: SpoolerGroup
  TAG                               : 0
  Display_name: Print spooler
  DEPENDENCIES: rpcss
  Jose
  SERVICE_START_NAME: LocalSystem
         
  I need to delete the Service jose as a dependency for the Print Spooler Service (and leave just the rpcss Service), then the Print Spooler Service will start.

  If you don't see the problem in the Print Spooler service dependencies tab, see what are actually of a command prompt window Print Spooler Service dependencies.  To do this, click on start run and in the type box:

  cmd

  Click OK to open a command prompt window.

  In the command prompt window, query the spooler to print (spooler) Service by entering the following command:

  sc qc spooler

  Whatever it is listed under needs of DEPENDENCIES is running before starting the print spooler.

  If there are DEPENDENCIES listed for things that are more installed, you can fix it, but first of all, we need to know what is indicated, then we can remove the ones that are not needed.

  If you make adjustments, do not forget to restart your system and make sure that changes "stick".

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• How can I get a print spooler for jet Office 6500 E709n

  somehow my print spooler is gone how can I get a new one, I ran the installation, diagnosis and utility and no doesn't solve the problem. I can see the printer on my wireless network but cannot print on it

  If your PRINT SPOOLER IS 'GONE', you may need to contact WINDOWS for that matter. I would check everything first well.

  What operating system do you use? If windows 7 or XP, follow these steps:

  1. click on Start Menu
  2 right click computer
  3. choose MANAGE
  4. click on Services and Applications
  5. choose the Services
  6 scroll down until you see PRINT SPOOLER, if it is there, click on it and RUN it

  IF you DO NOT SEE what LIST, you will need to communicate with WINDOWS, because you have to maybe reformat your OS, but contact them first.

  Let me know if this can help, thank you.

• When you try to add a printer, get error Printer Spooler service is not running

  I lost my printer and when I click Add printer, I get the message of this operation could not be completed. The print spooler service is not running. Then, the computer detects the new hardware and says the RPC server is unavailable can help?

  Check the status of 'Print spooler' & RPC (remote Procedure Call) services in the services window. You can check the link below to change the status of the services.

  http://TechNet.Microsoft.com/en-us/library/cc736564%28WS.10%29.aspx

  After the services start, delete all previous printers. Uninstall the drivers and then try to reinstall the printer again.

  If the problem still persists to the print spooler, you can import the registry across the entry below machine & merge the machine to issue:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  Also check out the link for your RPC unavailable problem:
  http://support.Microsoft.com/kb/242079

  Now, try to restart the print spooler new service & try to install the printer.

  Note: instead of copying files from another machine you can also run the SFC/scannow.

• recently, I get a "Print Spooler Service not running message. I have not changed any hardware. Someone has a similar problem.

  Suddenly, I get a message "prinetr spooler service does not.  To my knowledge, nothing has cahnged and I used the computer and the HP printer for years. -.

  Suddenly, I get a message "prinetr spooler service does not.  To my knowledge, nothing has cahnged and I used the computer and the HP printer for years. -.

  Just check on the print spooler works in SERVICES (RESTART)

• Cannot start my print spooler

  I have windows vista and I cannot restart my spooler service. My printer installs fine, but I'm not allowed to use it as a printer.  The scan function works fine. I tried using the methods described here

  but were unsuccessful. ->

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Right click on the print spooler service, and then click Properties.

  4. On the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  ( http://support.microsoft.com/gp/printing_problems )

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I have error 1068: the dependency service or group could start.

  I checked the dependencies for the print spooler and they started so I don't know what I have to do. Help, please.

  PS I downloaded and installed all the updates and tried reinstalling my driver software.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• print module cannot get the printer device context

  I can't get my printer to work. It seems that the computer does not recognize the printer when I plug. No printer symbol. then, when I try to print a square stands up and says 'printing module cannot get printer device context' I have no idea what this means or what to do about this please help

  You need to get the print vendor drivers.   You can try using a printer driver that converts data of the PDL even that interprets your device, but you should request this information from the company that made the device

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• When starting my computer, printers show as not specified, but is recognized to restart; cannot start the print spooler.

  When I start my computer (Windows 7), all my printers are inaccessible and labeled as "not specified"; When I reboot, they are all functional again.  Before restarting, I get an error message that the print spooler does not work.  When I try to start the print spooler, I 'Windows could nto start the spooler on Local computer service.  Error 1053: the service did not demand launch or timely control. »

  If you start/restart your PC twice before having all the features something interferes with the boot process.

  The problem occurs if you start own http://support.microsoft.com/kb/331796 NB this is the manual method not the FixIt

  And if the problem is still there on a place clean boot, and then if you start in safe mode what then?

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• Why anyone cannot repair vista print spooler errors?

  many 'experts' both 'fixes' so much useless information... I can't be alone in here... I tried every recommended around work
  of all the sites I find... and always impossible to add a printer on a vista 64 pc!

  Hello

  1. What is the exact error that you are experiencing when you try to install the printer?

  2. What is the model of the printer, and who is the manufacturer?

  3. What are the steps that you have tried to solve this problem?

  4 is this a wired or a wireless printer?

  5. is it a standalone printer or a network printer?

  6. What is the exact error that you are experiencing?

  I would like you to explain to me so that we can help you in a better way.

  Method 1:

  I suggest you follow the steps mentioned below.

  a. click Start> select Control Panel> in programs and features> select turn Windows features On or Off.

  b. click + sign of Printing Services.

  c. Select LPD and LPR. You must remove the Internet printing Client. Restart your PC to ensure there is no error in the spooler service.

  d. try to reinstall your printer software/driver.

  Method 2:

  I suggest to stop the spooler service, then restart and see if the problem is resolved. Follow the steps mentioned in the article below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3:

  If you use a network printer, then I suggest you follow the steps mentioned in the article below.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  See the links below.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• I cannot get my printer to print to the edge of the page and can not find the right settings.

  I am creating a spreads in InDesign A4 A5 booklet, what I've done now, but for some reason when I print it is not printing on the edges of the paper. It is short on the edge and runs along the long edge of about 3 mm 6 mm short. I don't think that the printer we have is full bleed, but I expect to get a little more narrow than at the edges. I looked at the document settings and reset all the options of bleed and Slug and I don't see anything to change in the settings local printers. Please someone any idea that I might be able to change?

  Thank you very much

  The list of features of the printer touts unless expressly impression "edge to edge", it cannot print almost certainly one of the 4 edges. It is a mechanical limitation, and 3-6 mm is fairly typical.

  tobyhawksmoor wrote:

  I expected to get a little more narrow than at the edges.

  Why?

  It is likely, there is nothing else to try. If you feed something that would or should print on the edges, if the printer is capable of that and got the 3 and 6 mm printable area margins, this is certainly the best it will do the printer.

• HP LaserJet Pro 8630: Cannot get my printer to scan

  When I tried my first scan on my new 8630, I received this message:
  You cannot use this function because it has been disabled. For more information, contact your network administrator or the person who set up the printer.

  I am the person who set up the printer, but I don't remember to deactivate the scan function.

  Any help will be appreciated

  Thank you

  So I'm back:

  On El Capitan, go to "system preference..."

  Go to security
  
  unchek: my security settings are set to "Mac App Store and identified developers."

  And chek: security settings have been set to "Anywhere".
  
  Removed all HP utilities and restarted first. Then reinstalled using the HP Easy Start and ensuring that the security settings have been set to "Anywhere".
  
  And... it worked fine...

• Cannot get my printer to print on the round of updates.

  I've just updated children computer Dell Optiplex GX620 and everything works well except can't get my computer to print (Lexmark X 1150) said it installed with print-ready documents, but may not do print. What have I done to make no impression?

  Hello

  You have installed the latest drivers from here...

  Is your USB cable properly? Verify another USB port?

  At he another printer installed on this computer at some point make sure that the default printer is Lexmark X 1150 checking by going to start > printers and faxes right-click the x 1150 and a default

  http://support.Lexmark.com/index?segment=support&UserLocale=en_AU&locale=en&ProductCode=LEXMARK_X1150&page=product&FromPage=null#1

  Concerning

  GT4U