HP LaserJet Pro 8630: Cannot get my printer to scan

Similar Questions

• OfficeJet Pro 8630: Cannot define the quality of scan

  I can't find where to put the "quality" of the scans.  I checked the Panel for full control of the camera itself but also access it through a web browser.  I CAN find where to put the quality of the copies, but I don't want to copy the darker things right if they are going to scan correctly.

  Hello.

  Open the software HP Officejet Pro 8630 from your desktop or in the start menu > programs > HP > printer folder.

  Click on scan a Document or Photo and make sure that the show preview option is checked, then click on Scan.

  You will see the options available within the dialogue area scanning tht of brightness and contrast.

  Kind regards

  Shlomi

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• HP Officejet Pro 8630: Internet connection for printer

  Hello

  I recently bought a HP Officejet Pro 8630 all-in-one printer and currently it hooked to my computer via a USB cable.  Everything works fine.

  I want to participate in the program of alternative to instant ink HP Service.  To do this the said program brochure that I have my printer is connected to the Internet.  I have never made a connection like that.

  Currently, I don't have a cable modem wireless.  Do I need to have a cable modem wireless to connect my printer to the Internet?  If this is not the case, how can I connect my printer on my existing cable modem?

  My cable modem is: Motorola SURFboard of SBV5220

  Thank you

  Mark

  Hello

  Your printer needs to have an ethernet port in the back, where you can connect a LAN cable. You will need to connect a LAN cable to a free port on your current modem on the back of the printer - this should establish an internet connection.

  

• Just got my HP LaserJet Pro M451nw 400 and it prints all greenish! Tried everything

  Help!

  I just got my HP LaserJet Pro M451nw 400 and it prints all greenish!

  I tried everything in the troubleshooting page for quality of printing, calibration, color settings, page, even the driver HP Universal PS of cleaning.

  When I entered my product in the registration area, it is said the warranty is good until June 2014 as Newegg said the guarantee would be also 1 year ...

  I'm sorry you're having trouble with your new LaserJet print quality.

  I assume you are using supplied with the printer, toner cartridges since this is brand new.  Otherwise, recharged cartridges sometimes are not of high quality and can cause less than optimal printouts.

  The following link gives several options to try if you have not already tried these things:

  HP technical support URL

  One of the options I copied from the above URL:

  Adjust the color settings in the printer driver

  Change the theme color for a print job

  1. On the file menu in the software, click on print.

  2. Click Properties or preferences.

  3. Click the color tab.

  4. Select a color theme from the drop-down list of color themes.

     1: tab color

     

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Windows 8 and now cannot get my printer to print. Tried to print a test page, message says "sent to the printer test page", but it does not print.

  I recently downloaded Windows 8 and now cannot get my printer to print.  Tried to print a test page, message says "sent to the printer test page", but it does not print.  Can you help me?

  You have installed the drivers and software for your printer?  Did you go to the printer manufacturer's website to see if they still have 8 available Windows compatible drivers?  If the answer is no, then you must do this before all first I try to print.

• LaserJet Pro M402n: Cannot print on LaserJet Pro M402n on port TCP/IP for Windows 10

  I'll put up a new workstation Windows 10. It is brand new with all updates applied. The printer gives me fits. I tried to install as myself (with administrator privileges), 'run as administrator' and logged in as a local administrator and I got the same results each time. I used 'install' and 'non-installateur' version of the most recent drivers.

  The printer is a HP LaserJet Pro M402n. I'm installing a Standard TCP/IP Port. I can ping the printer. I can get on the printers web interface. Likewise, the installation program detects the printer and gives no error. But when the installation is complete, and I try to print a test page, nothing happens.

  The same printer is configured the same on my old Windows 7 workstation which is still on my desktop and connected by the same switch and on the same subnet as the new work center. It prints very well.

  Any ideas to get this to work?

  Got, it works. It had to be that something gimped upward in the initial installation of Windows. I've reconfigured on the PC and was able to get the printer to work first time.

• LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

  This MFP is stuck with the message, 'Printing Fax Page One' I've tried the reset instructions are on the forums, but cannot get rid of this message. Is there a reset 'hard' or 'factory' I can do? Thank you

  Hi again,

  I would say for updating the firmware of the printer.

  Here is the link just choose your operating system and select the firmware download.

  HP LaserJet Pro M127 MFP series Firmware update

  Make sure that you scroll to the Firmware section.

  See if that helps

• HP Laserjet Pro 200 ColorMFP m276nw stopped printing

  I installed the all-in-one color HP Laserjet Pro 200 m276nw a couple of months and configure for network printing. So far, it works perfectly for everyone in my house. Whenever I try to print, nothing happens. Can print other in my house that are on the network. When I go to the print queue dialog box, I get the message: "printing - the printer is unresponsive." If I go into printers and faxes application in system preferences, it shows this printer as inactive. I tried to restart my laptop (Macbook Air), turned the printer market, turned Wi - fi market, enabled Bluetooth market, even tried to connect to the printer via the cable. What can I do else?

  Hi Robvale,

  Welcome to the HP Forums!

  From what you described, it seems that the print job do not leave the print queue. I've included the document 'cannot print? Print jobs are stuck in the print queue'. Please select your version of Mac and follow the steps listed.

  If you still have problems after that, please provide me the version of Mac OS X, you're running. I've included the document 'find your OS X version and compilation of information', if you need it.

  Impatience on your part.

• HP LaserJet Pro 200 color M25: installation printer HP Laser Pro 200 M251nw.

  M251nw color HP LaserJet Pro 200 No. product installation. CF147A: Installer said he has successfully installed my printer, but then the printer to add it to the window that says it can't find printer.  HP said I have to get my license from Apple. Apple says that I have to get my HP permit

  Hi @steeldrv ,

  I understand that you are having problems, adding the printer on Mac. I will do my best to help you.

  How is the printer connected? (USB, Ethernet, WiFi)

  I checked online and there is a form available full functionality driver HP.

  What is the software you have installed already, who says it was successful?

  HP LaserJet Pro 200 color M251 full set Solution software - Mac OS X 10.6, OS X 10.7, OS X 10.8.

  Try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Were you able to find and add the printer in?

  Print a self-test of the printer to make sure this isn't a hardware problem, causing the printer does not detect.

  Print a Configuration report.

  If the printer is networked, try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Please let me know the results and the way that the printer is configured, so I can provide appropriate measures to solve this problem.

  Good day!
  Thank you.

• LaserJet Pro M1130: how to download printer driver is no longer available

  I recently bought an Acer Aspire running on Windows 10.  As the laptop lacks a CD player, I can't install the printer driver for my MFP HP Laserjet Pro M1130 using the CD that came with the printer.  This printer is not listed on the site of HP... How can I get the printer driver installed?

  Search you the Web?  Everything on the web site of HP.

  Type:

  Driver-product installation software

• LaserJet Pro M177fw: LaserJet Pro M177fw: paper hangs when printing

  Whenever I print the paper gets stuck less than halfway so that the printer display says 'Printing', I cleared the jam several times and tried different settings and it won't work. The book is very good, I tried it on LaserJet Pro my brother. I tried on my laptop Mac and Windows PC, Wifi USB, nothing works.

  Hi@faisaal,

  I see you've found paper jams, the paper goes in at half way and gets stuck. I will definitely do my best to help you.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  HP Color LaserJet M176n MFP Pro and the printers M177fw - solving paper feed or paper jam problems.

  I've included the manual with information on where to look for paper jams or obstructions.

  Start on page 75. Multifunction COLOR LASERJET PRO.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• HP Officejet Pro 8630 - work of borderless printing produces blank pages

  Hello-

  On my HP Officejet Pro 8630, when I start a print job and select ' without borders on "print 3 or more copies, the first 2 pages of the print job, and then a blank page prints, followed by a good impression, followed with a blank page, etc. until that work ends.

  If I disable the option without borders, the job will print correctly without blank pages.  I tried printing from multiple computers and programs with the same number and have updated printer drivers / the most recent versions.

  I tried printing wired network, wireless network and USB all with the same result.  I've had the printer for less than a month.

  I use the printer for business purposes, and it is causing the major headaches!

  Thank you

  I solved the problem by selecting the Type of paper - HP Bright White... She has been set to the default value of plain paper.  I can now borderless printing correctly without blank pages.

• HP Officejet Pro 8630: Reverse order of printing pages

  The driver for the HP Officejet Pro 8630 does not support reverse Page printing order.        Y at - it a new version of the driver in development?       Is there a workaround approved by HP?

  @dsolver,

  Welcome to the HP community

  I read your message want to order back print of your Officejet 8630 and are looking for a work-around. After combing through some messages of the forum here, I found a post from @Bob_Headrick that I would say check and try it might work for you.

  Here is the message: Re: Cant Reverse Print Order HP Officejet PRO 8630

  I hope that helps!

  If you found my post has helped to achieve a solution, click on the button accept as Solution below and thumbs up button to send me a 'thanks '.