Cannot make calls to the cell, only Skype

Similar Questions

• SIP phones to register but cannot make calls to another

  Did I miss something in the following configs? The phones are able to register, but cannot make calls to another? Should I add to the config to be able to make calls?

  Current configuration: 8173 bytes
  !
  ! Last configuration change at 20:35:57 UTC Tuesday, February 2, 2016 of wachter
  !
  version 15.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname KCC-CUCME-2921
  !
  boot-start-marker
  boot-end-marker
  !
  !
  ! type map necessary for vwic/slot-slot 0/0 control
  logging buffered 51200 warnings
  enable secret 5 $1$ fner$ un2VRxsPt6gy418Fm/tHz.
  !
  No aaa new-model
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  IP VOICE dhcp pool
  network 192.168.2.0 255.255.255.0
  4.4.4.4 DNS Server 8.8.8.8
  default router 192.168.2.1
  option 150 ip 192.168.2.1
  Infinite rental
  !
  !
  !
  IP domain name kccoring.local
  IP cef
  No ipv6 cef
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  CTS verbose logging
  !
  Crypto pki trustpoint TP-self-signed-1027156387
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1027156387
  revocation checking no
  rsakeypair TP-self-signed-1027156387
  !
  voice-card 0
  !
  !
  !
  voip phone service
  list of approved IP addresses
  IPv4 192.168.0.0 255.255.0.0
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  SIP
  binding control source-interface GigabitEthernet0/0.20
  bind media source-interface GigabitEthernet0/0.20
  Registration Server expires max 600 min 60
  !
  voice class codec 1
  preferably 1 codec g729r8
  g711ulaw codec preference 2
  iLBC codec preference 3
  !
  !
  !
  !
  Global voice registry
  FMC of fashion
  source-address 192.168.2.1 port 5060
  Max - dn 25
  Max-pool 25
  Zone 8
  Flash TFTP-path:
  create the profile synchronization 0042525408078253
  !
  interface GigabitEthernet0/0.20
  encapsulation dot1Q 20
  IP 192.168.2.1 255.255.255.0
  !
  interface ISM0/0
  IP unnumbered GigabitEthernet0/0.20
  IP virtual-reassembly in
  rescue service module
  service-module ip 192.168.2.5 address 255.255.255.0
  Service-module ip default gateway 192.168.2.1
  !
  interface GigabitEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface ISM0/1
  no ip address
  !
  interface Vlan1
  no ip address
  !
  IP forward-Protocol ND
  !
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 192.168.2.5 255.255.255.255 ISM0/0
  !
  !
  !
  flash TFTP server: kern2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: kern78xx.11 - 0-1 - 11.sbn
  flash TFTP server: rootfs2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: rootfs78xx.11 - 0-1 - 11.sbn
  flash TFTP server: sboot2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sboot78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sip78xx.11 - 0-1 - 11.loads
  Flash TFTP server: its
  Flash: copstart.sh TFTP server
  Flash: load36213.txt TFTP server
  Flash: load621.txt TFTP server
  Flash: load622.txt TFTP server
  Flash: load623.txt TFTP server
  access-list 23 allow 10.10.10.0 0.0.0.127
  !
  control plan
  !
  !
  Voice-port 1/0/0
  !
  Voice-port 1/0/1
  !
  voice-port 1/0/2
  !
  Voice-port 1/0/3
  !
  !
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default

  go to respective voice register pool and configure ' no figure collect kpml

  example of

  vocal range pool 1

  No kpml transferred to numbers

  Codec to g711u

  reset

  Then go to global registry of telephone communications and perform without creating a profile and create profile

  BR,

  Nadeem Ahmed

  Please note all the useful post.

• I want to register my phone with a chip from the Bahamas to make calls to the

  I want to register my phone with a chip from the Bahamas to make calls to the United States, but it is not an option. Is there a work around for another option? I have unlimited international calls

  Unfortunately, the SkypeToGo program is not available in the Bahamas.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• FlexUnit ant - running tests that make calls to the server

  Hello

  I am using BlazeDS in my project to connect to a Tomcat server. I have configured my services in the file services - config.xml and past the location of the file as an argument to the compiler in Flash Builder.

  I have some unit tests that make calls to the asynchronous server. When I run these tests from Flash Builder, the thin running tests. But when I run the tests via the flexunit ant task, these tests only downtime while the other tests pass. In addition, it seems like the server is contacted at all as my messeges newspaper in my code aside server are not visible.

  I tried passing the path to the file services - config.xml and the root of the application context in the mxmlc Ant task that compiles my TestRunner.mxml file:

  "< mxmlc file="${main.src.loc}/flexUnitTests/TestRunner.mxml "output="${bin.loc}/TestRunner.swf ">"

  < dir = "${lib.loc library path}" append = "true" > "

  < include name = "*.swc" / >

  < / library path >

  < element path-source-path = "${basedir}" / src "/ >"

  < element path-source-path = "${basedir} /locale/ {local}" / >

  < compile .verbose-stacktraces > true < / compile .verbose-stacktraces >

  true < compile .headless-server > < / compile .headless-server >

  < compiler.services > C:\myApp\Source\WebServer\WebContent\WEB-INF\flex\services-config.xml < / compiler.services >

  < compile .context-root > myApp < / compile .context-root >

  < / mxmlc >

  No use. My tests still expire. Here is my flexUnit task:

  < target name = 'test' depends on 'compile' = >

  <!-run FlexUnit tests and publish reports->

  < flexunit

  " swf="${bin.loc}/TestRunner.swf ".

  workingDir = "${bin.loc}" "

  toDir = "${report.loc}" "

  haltonfailure = "false".

  verbose = "true".

  localTrusted = 'true '.

  headless = "${headless}" >

  < source dir = "${basedir} /locale/ {local}" >

  < include name = "*.properties" / >

  < / source >

  < dir = "${lib.loc library}" / > "

  < / flexunit >

  I guess I'm missing something - a way to tell Ant about the location of my server or something like that. Help, please!

  Thanks in advance.

  Maury

  or create a config replacement for testing services. It would be able to resolve the server url if the swf file served from a web server.

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Cannot change fill in the cell

  Hello

  I know... sounds easy, but I'm stuck.

  Once I put the body tag, th, td to the padding of say 30 cell (which I have) I can't have a table at the breast to have its own fill parameters.  When I go into the properties of the table, it is said that the padding is 0, however, is not.  It adopts the filling of the PAGE/BODY, no matter what I put in the cell accessories.

  The only time wherever I have control over the inner padding a tabel/cell is when filling the page is 0.

  http://amsodconsulting.com/SiBeam/PSB.html

  Please view the source and tell me what I'm missing.

  Thank you!!!

  Esther

  The model underlying this page was not properly, you know?

  This do-

  Create a new page (basic HTML).

  Use the FILE | Save as template...

  Look at the code in the head region of the page, in particular the editable

  the region around the

• Cannot make calls via laptop

  I can't make a call via Skype on laptop, but works well for the iphone (even Skype account for both devices).

  Every time I tried to make a call (after reinstall many times), it will close by saying "Skype has stopped working".

  And the message in the box said "a problem caused blocking the program works correctly. Windows program and you warn if a solution is not available"(but the solution will never come).

  Note that I use Windows 8.1 and I already set the compatibility mode...

  Update your Intel video display driver compatible Windows 8.1 version. The currently installed version (9.18.10.3234) is designed for Windows 8.

  http://www.Dell.com/support/home/us/en/19/product-support/product/Vostro-5470/drivers

  Be sure to select the option Windows 8.1.

  Also look at the other driver available for your laptop updates.

• DEFY: Cannot make calls...

  Hello

  I just bought Defy and I think that it is large, has many interesting features, but it does not call...

  About 10 minutes after it's turned on, I can't make all the calls (from widgets, dialer, contacts...). As soon as I press the dial button, a pop-up says "call time 00:00. And then the call is terminated.

  So I decided to 'factory reset '. But even after factory reset, this question is reproduced.

  I have attached two files: one is the journal when I can make a call and the other is there is not possible to make calls.

  A fact interesting, is that each time I start up (or factory reset) the phone, I can make calls for 10 minutes (approximately). After this time, if I want to call again, I have to start up the phone once more.

  To receive calls/SMS, it works fine.

  I think this phone is great, and I don't want to give it up.

  Can someone help me please?

  Thank you.

  I just found the answer.

  The problem is how Android deals with 'Blocking' and 'call forwarding '. If you try to change the settings, you can never reset these settings again...

  I tried to use my SIM card from mobile phones very simple, and all show me the message "you can not call so that the call blocking is active... ». But I never changed the settings...

  This also occurs with other suppliers of Android.

  The only solution is: go to your company and ask them to change your current SIM card to a new (not your line number, just the SIM card). And do not use the "call forwarding" and "call blocking" in Android

• 6945 CP cannot transfer calls long distance cell phone

  I am facing a problem with a Cisco IP phone 6945 and Unified Communications Manager Version 9.1.2.  The phone does not forward calls to a long distance cell phone.  I can't add/suffix the long distance code.  I tried different combinations with eligible set 0-9, *, #, +, X and I can not find a solution.

  Please let me know how to forward calls to a cell phone long distance without turning off the long distance code requirement.

  I wasn't sure the community post.  I looked at history and other messages were submitting to IP telephony, but it wasn't an option in the drop down.  My apologies if I've landed in the wrong forum.

  Thank you in advance.

  Hi Steve,.

  You will not be able to do.

  Please see the link that says

  Calls that are passed to a FAC or compatible CMC routing model fail because no user is present to enter the code. This limitation applies to forwarding configured in Cisco Unified Communications Manager Administration or Options for Cisco Unified CM user pages. You can configure call forwarding, but all calls that are passed to a FAC or compatible CMC passes the results of the model to reorganize. When a user presses the CFwdALL soft key and inserts a number that has the College or MCC enabled on the routing model, the user receives reorder and forwarding functions fails.

  You cannot prevent the configuration of call forwarding at a college or compatible CMC route model; diverted calls that use these models road delete because no code is entered. To minimize interruptions of call processing, test the number before you set up call forwarding. To do so, dial the destination number transfer; If you are prompted for a code, do not configure for this number call forwarding. Warn users of this practice in order to reduce the number of complaints arising from rerouting calls that do not reach the intended destination.

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/Admin/7_0_1/ccmfeat/cmfsgd701/fsfaccmc.html

  regds,

  Aman

• Phone says off cannot receive calls all the ok.how else do I turn on.

  You can call off the coast to receive calls, everything else works. How can I re set up to make calls. ?

  Check with your provider, maybe you have a faulty SIM card.

• I can receive but cannot make calls from Mac

  Hello

  I try to have calls using my iPhone connected to my MacBook Air, but I have this message "your iPhone should use the same iCloud and FaceTime account.". This is something that surprises me because I can receive calls from my MacBook, but I can't make calls from my MacBook. There's someone who have / had the same problem?

  Thank you

  CO

  OS X El Capitan: use your Mac to make and receive phone calls

  Make calls

  FaceTime: Enter a phone number in the search field and then click the Audio button or click on Audio to see your recent calls.

• Access 2003 - repeated "You cannot make changes to the database" error

  Hey all,.

  Im having a very strange problem with Microsoft Access 2003, we work with the old databases and when we open them by Access 2003 we get the message "you cannot make changes to objects in database" error, which is expected. However, the laptop began to repeat this message repeatedly about 8 times after the first time that you click on it. Its very annoying to have to keep clicking to get rid of the error message. Its a very strange problem, any ideas on how to solve this problem, or even explain what could of happened will be appreciated.

  Thanks in advance

  PS Ce is not an option for updating the database, we work with a program that uses a database of 97 old and if you update the database the program will stop working.

  Hello

  First of all it doesn't seem that it is a Toshiba laptop failure.
  This looks more like a problem of Microsoft.
  I recommend to check the articles in the Microsoft Knowledge base or / and contact Microsoft technical support.

  I studied a bit and found these pages. Maybe you will find useful information.

  http://www.smartcomputing.com/editorial/article.asp?article=articles/WebOnly/TechSupport/420w10/20w01.asp&GUID
  http://support.Microsoft.com/kb/824260/
  http://support.Microsoft.com/?scid=kb;en-us;824278&SPID=2509&SID=98

  Good luck

• Cannot transfer calls to the specified number

  Hi all

  I am having some problems of transfer of calls to a number. I have confirmed that I can call Skype number to show subscriptions etc. are all working, but when I try and with impatience, I get an error in Skype, saying that he could not save the changes and to try later.

  I left it for 24 hours and the same error continues.

  If I transfer from the management portal, it transmits to a stange voice message that's not mine.

  Any ideas?

  Thank you

  Problem solved.

  I just closed Skype application. Connected to the Web site account login page, deleted my settings and call forwarding number.

  The Skype client is rebooted and entered number "forward my calls to" with "forward calls if I do not answer within 1 sec» Put to the test. Successfully.

  its working fine and calls are the transmission as before.

• Cannot make changes to the properties of the taskbar - does not

  Win XP Home-SP3-SafetySkan and DiskRepair were unnecessary run-help.

  Cannot make changes in task bar accessories. Most irritating: can't keep its shortcut icon on the bar. Not preloaded operating system so no manual. Thanks in advance.

  Hello

  • What were the changes made before the issue started?

  You can view these methods:

  Method 1:

  I suggest you to check the question in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2:

  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

• BlackBerry smartphones can not make calls from the home page or the phone book.

  I've had my curve for several months now and the other day, that my most young got a hold of it... I don't know how they do it, but my children can do things with my phone and computers that I did not know they could do... In any case I tried to access my voicemail by organizing the 1 on the homepage and it took me to instead call log, so I tried to make a call from the phone book by selecting the name pressing on do it call button and no as soon as I actually had to go into the call log and manually type the number.

  My question is... What did do?  It is very aggravating and I would ask him, but he is two... I know he did not drop it or I would take it to a service provider.  All of the suggestions.

  Thank you

  If you go in your call log icon or by phone, click your menu button and go to Options. Then, go to the General Options. See if your the home screen dial is set to Yes.

  Also try to reset your device by removing the battery for 1 minute and replacig it to leave the unit restarts. Try it later