Cannot modify an imported placed the file have

Similar Questions

• Premiere Pro CS6 importing .mp4 = "the file have no audio or video streams."

  Hello

  When I import a clip in Adobe Premiere Pro CS6 MP4, I get the following message:

  "Failure to import a file.

  151_0010_01.MP4

  Error message

  The file has no audio or video streams. »

  I have the latest Quicktime, and I reinstalled Premiere Pro CS6 several times already.  If someone knows a solution for this, I'd be very happy.  Below are my system info and the clamp.  Thank you, Robert.

  Operating system

  Win 7 Ultimate 64 bit

  CLIP INFORMATION

  Full name \BPAV\CLPR\151_0009_01\151_0009_01.MP4

  Format: MPEG-4

  Operating name: XDCAM EX 35

  Format profile: Base Media / Version 2

  Codec ID: mp42

  File size: 1.76 Gio

  Duration: 7 min. 5 sec.

  Overall bit rate mode: Variable

  Overall bit rate: 35.6 Mbps

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Video

  ID                                       : 1

  Format: MPEG Video

  Operating name: XDCAM EX 35

  Format version: Version 2

  Format profile: Main@High

  The format, BVOP settings: Yes

  Format settings, matrix: Custom

  Parameters of the format, GOP: M = 3, N = 15

  Codec ID                                 : 61

  Duration: 7 min. 5 sec.

  Bit rate mode: Variable

  Bitrate: 34.0 Mbps

  Maximum bit rate: 35.0 Mbps

  Width: 1 280 pixels

  Height: 720 pixels

  View picture format: 16:9

  Frame rate mode: Constant

  Frame rate: 29.970 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Compression mode: lossy

  /(pixel*Frame) bits: 1.231

  Stream size: 1.68 Gio (96%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Primaries: BT.709

  Transfer characteristics: BT.709

  The matrix coefficients: BT.709

  Audio

  ID                                       : 2

  Format                                   : PCM

  Parameters of the format, "endianness": Big

  Format settings, sign: signed

  Codec ID: two

  Duration: 7 min. 5 sec.

  Bit rate mode: Constant

  Flow: 1 536 Kbps

  Channels: 2 channels

  Sampling: 48.0 KHz

  Color depth: 16 bit

  Stream size: 77.9 MiB (4%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  DELETE files inside "Media Cache files" and "hide media".

• placed the file have illustrator but keeping the limit of illu artboard size

  Hello world

  I have a graph composed in illustrator to a certain size and this imported into indesign. I have another graph (diff size) using the same size of document HERE which I would like to place it directly on the previous chart position, is this possible?

  Whats happening is as soon as I put the second chart its debut x, change of coordinates y which is normal, but I want to keep x, coordinates are the same as the first chart (the artboard size).

  I tried to:

  1 create a boundery around the Board graphic with 0 race and no fill, and then place the file but indesign ignores the empty box.

  2. fill the border area white around the artboard, the graph on a layer different illustrator, then off the layer of white box in indesign object layer options, but then the graphic element moved to the top.

  I hope this makes sense...

  Thank you

  Lister

  Show options when setting up, then select crop to the media.

  Bob

• Save a PDF file cannot be modified, losing the file HAVE changed.

  It's great that illustrator can edit PDF files and it's great that Illustrator can record on a non editable PDF. But why, for the love of sanity, I would like to save a PDF file cannot be modified, but then have the original file, currently open HAVE disappear leaving only this little pointless PDF file? I STILL want the file HAVE to remain the main current job file original. But it doesn't work.

  Or if, for some reason I can't understand, this behavior is necessary, and right, then at least it should show unequivocally that I am to modify a PDF file cannot be modified and strongly suggest to me that I might want to save an editable PDF or HAVE a file, or even do it automatically until I close the file (or Illustrator crashes as it is wont to do).

  I'm working on a file HAVE and I need to save a small file of WIP not editable for the customer display. I go to file - save as-> PDF / smaller file size / uncheck "preserve Illustrator editing capabilities". I send the PDF file to the client and continue to work and save, assuming that I'm working on the original. The file looks and behaves exactly as it did until I taped that, intuitively, I guess that is the file HAVE same, original, with the PDF file in a copy. However, when I come back the next morning, after having closed the file, only the low resolution not editable PDF file remains. The file doesn't help, and I have to redo all the work all the way back to the last time, I saved the file I saved the PDF.

  Much trouble, loss of hair, the time wasted, face Palm trees, etc.

  The thing is, I now /know/ does and I'm going out of my way to avoid it happening, but in the race at the end of the work and send commands to the client and manage multiple versions of files, it still happens. Now clearly this is my fault, but heck, Illustrator could behave much more usefully in this regard!

  Well, I must be missing something, I guess.

  I asked how "save a copy...". "is the way lasts, and you replied that you were referring to not using Save a Copy... So I re - submit that by using Save a Copy is the solution to your original problem.

  • Work in Illustrator; number of objects; several layers, live effects, etc.
  • Want a copy of WIP for the customer as you have described originally...
  • Choose file > save a copy... Format is not question could make no editable PDF, raster format, whatever...
  • Continue to work in Illustrator... under a State record which is absolutely no different than if I had never done the Save a Copy... There is no "silent dump' edit-ability or any such similar event. If I record, I save it HAVE original, or a new if the State was not saved.

• Cannot open any programs, I think that somehow the files have been changed to .lnk files

  Original title: I'm unable to open programs in my Start Menu.

  When I click on an item in the beginning, all programs selection and click it, instead of opening, I get the name of the program, for example Microsoft Works... LNK and that's all I get the program never opens.  I think somehow that the files have been changed to .lnk files but do not know how it happened

  This happened for several months and I'm sure that there is an easy solution to return to what it was but don't know what.  I tried the system restore, but that did nothing and don't know what to do next.  Any ideas?  Thank you... betseyd112

  original title:. LNK files

  Hello

  1. what operating system you are using on the computer?
  2. did you of recent changes on the computer before this problem?
  3 are you facing this problem with a particular program or all programs?
   
  See the methods and check if that helps.
  Method 1: refer to the article for help.
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505
   
  If the problem persists, create a new user account and check if that helps.
   
   
  Method 2
  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Let us know the status of the issue.

• Cannot preview filetype please download the file for display and garbled text on an uploaded image

  Dear Madam or Sir,

  When I click on a file titled 'Subject access request letter re account 12527629 Sort Code 60-10-34 24022015.pdf number', which is stored in my account on Acrobat.com, I get the response "cannot get a filetype overview please download the file for display. This file was created from a document in OpenOffice .odt the same title. Please notify.

  I downloaded an image, which is supposed to be a .pdf file, since the installation of web of Royal Mail Track & Trace using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its resemblance to the text. Please notify.

  Kind regards

  Ron Platt

  PS I tried to join the two files (.pdf) but informs me that "image type is not allowed. Please notify.

  Hi Ron,

  In your efforts, you mention in step #6 you save the file as a PDF secure. Applied security files cannot be previewed to the customer, that's why you get the message "cannot preview filetype please download the file for display. This message preview complete and preview the hover. After downloading the file, you should be able to access it without error (within the limits of the guarantee applied).

  The hover behavior you report is expected. If you hover over a file name, you will see "hover" noticed after a few seconds, that will get you a small preview of the file (rather than having to open it in the overview). If poster only if you hover over a name of file, not in the empty area of each line, so that you have not seen continually arise.

  Hope this helps,

  Laura

• The files HAVE as links within a file, indesign to then be a pdf file, problematic?

  I want to know if the files have linked to an indesign file, which must then be PDFed for the printer, problem somehow. I was always asked by my printer to have all my images within a PDF, CMYK value and saved in tiff format.

  It seems that they should not be a problem, and that by converting the format tiff s i just lose in detail and it being a chore, as I have over 150 images.

  Am I wrong?

  art of John Johnson says:

  What is a manual operation? where in illustrator I convert individually these or make me an option within indesign to do this to all the links of the eps?

  You can record an action to save as .ai and close the file, then run that in the form of lots on a folder of files. But I do not convert batch if I am preflighting. When I control upstream I open all the files, look for problems and potential problems, sync (if any) color, perform the action to remove unused items from the Panel, then save as a new file. I have always save as .ai with PDF compatibility and, if possible, check that all images are linked not shipped.

  Read my file for a file sizes have 370 Ko or there abouts, looks small (although we're talking here of line, maps, etc).

  But I can read is inside my document setup, under 'Transparency' my balance pixelation/vectorization is 75 (in the direction of vector), my resolution for line art & text is 300ppi, gradient and mesh is 150ppi. don't know if I'm just throwing numbers at you, but that's what I got.

  Those are the values by default of the effects of rasterization resolution (for example effect > esthetics > Drop Shadow) and gradient meshes are pixelated when you print or save a PDF file. I usually set up a predefined custom flatterer who goes completely to 100% and does not plan type or convert lines to fills. These are used for priting and record in PDF format only. Your .ai file contains a PDF high resolution whose Illustrator unknown when editing but that InDesign and Photoshop use to import.

  The size of the file is irrelevant to the resolution of the built-in images. 370 KB is quite small, however, and when combined with your description of the content gives heavily to think there is no raster elements, so nothing to sweat. You can open the links Panel to see if there are images embedded or linked. I expect none.

• No functionality to import under the "file" menu Using winows xp and firefox 7.0 beta

  Trying to import Internet Explorer Favorites. Your help shows how go to 'file' and click Import.

  I used the 'alt' key to display the traditional menu.

  There is NO "import" under the "file" menu function

  How to import bookmarks?

  I use Windows XP and Firefox 7.0 beta.

  Import bookmarks in bookmarks (library) Manager

  • Bookmarks > show all bookmarks
  • https://support.Mozilla.com/kb/how-do-i-use-bookmarks

• Cannot access certain Backed-Up files, the files have been backed up by Modem Toshiba F:. They are visible but do not meet the identification by clicking on 'open '.

  On 3 Mar 11 we couldn't send or receive e-mail. March 6, 11 we couldn't get online. The response has been"Internet Ecplorer may not display this web page. "9 Mar 11, I called Dell hardware Plug and informed them of the problem. I backed up the files when Dell informed us that the TechRep would happen on 9 Mar 11. He looked at the PC and has determined that the hard drive and motherboard were corrupt. It replaced the two parties. I waited two more days until all security documents have been uploaded. On 11 Mar 11 I tried to download the Backed-Up files in the Modem Toshiba F. I clicked on "open: for two dates in question: there were six selections: Internet Explorer, Documents, drive E, recipient of the E-Mail." WINRAR and Adobe Reader. In vain.  Thank you very much for helping us with this annoying problem. E-mail address is removed from the privacy *.

  Daniel Stanley

  TELEVISION, USAF

  I. the answer was very helpfuk, I did not know that Microsoft it frre of service.

  2. the computer is the same: Windows Vista Home EditonSP @.

  3 here are the answers when I click on the file 2011-03-06:

  a. backup Now EZ is displayed. Click back causes the following to appear.

  b. backup files 2011-03-06.

  c. backup files 16 ZIP - ZIP Archives-unpacked. Size 194, 134 236bytes

  d. cannot download 2011-03-03, THEY are apparently combined.

  e. frankly, as a novice;  I think that it is theToshiba F: Extractor Back Up that causes the problem. Files are visible, but will not open the file.

  Daniel Stanley

  TELEVISION, USAF

• cannot choose "Import" in the file menu - not highlighted

  try to import bookmarks from IE - on the file menu of Firefox choose "Import" is not highlighted and can not be selected - why? Maybe it's a mistake to base on my part from somewhere.

  Try their import via the bookmarks Organizer.

  1. From the menus, choose "Bookmarks", then on "organize bookmarks...". "to open the bookmarks Organizer (also known as the name of the library)
  2. In the library, select "Import and backup" then "Import HTML.

  This gives you the ability to import from Internet Explorer?

  If it isn't, export favorites in Internet Explorer to a HTML file, and then import the HTML file in Firefox. This process is described in the article importing Internet Explorer Favorites from another computer .

• Cannot edit or import external data files in Excel

  Hello

  I use a monthly report in Excel that works fine in Windows but not Mac. It is a binary XLSB file that pulls in the 4 files external .txt from various places on the web to load the most recent data in the report. If I open the file in Windows, it asks if I want to allow data and when I click Yes, it downloads data from each txt file, does some calculations and is all ready. In the Mac it is said that it cannot find the files.

  So my first thought was to go to data > Connections and check the properties, mainly the url that it uses to pull in each file. However, in Excel for Mac (Office 365) 16 properties button is grayed out. This means also I can "save under" when comes a new month and change the URL to match the new month either. You can bring up a properties box, but it is very limited, with no option to change the url.

  I also tried in Excel 11, same problem. I do not want to Boot Camp and have to load Windows (and use up to 20 GB) just for a single file, but I need to use it. Any ideas?

  Richard

  Rekrmend wrote:

  Hello

  I use a monthly report in Excel that works fine in Windows but not Mac.

  Then you should post your question on the forums Microsoft Mac because it is their software, you are having problems with, and that's where the office gurus hang out.

  http://answers.Microsoft.com/en-us/Mac

• Substitute the lack of rights of use error "cannot play, burn, or synchronize the file because that media rights are missing"

  I recorded my own music on several cd (using a computer with XP). I took these CDs and I snatched a few pieces in Win Media Player (on a more recent with Win 7 laptop) so I could do a "best of" disc type. I made 2 of them before. Now, I can't burn the same playlist titles to a 3rd cd because I get the message "can't read, burn, or synchronize the file because the media rights are missing." There is no right of media since I recorded this music and I have already burned 2 CDs of this same music on this same computer. Why they were so short?

  I downloaded the software updates. Could it be the problem?

  How can I replace this error message which is in error?

  Thank you.

  You cannot, if it is, the security protection would be worthless.  It would be like cracking after a password.  It's a shame, I know, but you will need to copy the files again without any protection applied.

• Computer takes forever to load, the files have no icon

  Hello!

  Since yesterday, I have this problem: when I open computer, the green bar at the top starts to load, there are magnifiers on computer, libraries and Favorites in the left pane and nothing appears in the main pane of Solution Explorer. If I manually navigate to any folder by typing the address, it takes me to this folder, but there is no icons for the files or folders. Although, they open as expected, may be renamed etc., but right click on explore crashes. The desktop icons, menu start and see the control panel correctly.

  No recent program has been installed. Before this problem occurred I accessed a suspicious Web page (from a USB key), but...

  I scanned with Malwarebytes, Spybot, ESET, ran ChkDsk, sfc/scannow.

  They have all found nothing except the sfc found 2 corrupt files that could not be repaired.

  Important the fact is that in Safe Mode, I have the same problem!

  Can someone help me on this?

  Screenshots: https://skydrive.live.com/redir?resid=68DDE8B5E2A73B7A! 1908 & authkey =! AF_v7TKydOGoaWM

  Correction, I had a virus, but it wasn't the problem.

  I reinstalled windows and all programs, one by one and that the problem was back, but now I now why! The problem occurred after installing Acronis True Image 2013, because I have disabled its services to run automatically. It seems that Acronis is not like that... and he wants to force me unnecessary services running, most of the time. After you have enabled services, the problem disappeared. :) Good to know!

• LCM - artifact of import to the file system without using a source application

  Hi all

  I would like to ask if I can import the objects in the file system in SSP without the source application, I have the source file: XML (which contains the resources folder: configuration, type of plan, artifacts global relational "Data.xml") and record information: registration, sourceinfo.xml) which was taken from an application that no longer exists!

  How could we do?

  Thanks in advance

  Kind regards

  1003344 wrote:

  Thank you for your reply, I tried to put the folder under what but I can't see them yet! I also tried tried to put the. XML directly under what files but I still don't see the sub file system

  do I need to restart the server?

  Kind regards

  If you put the files and the folder structure in place then there is no need to restart and it should pick it up, if the structure is incorrect, so he will not pick it up, might be interesting to try an export of test on a different application or a system to get an idea of what files you need.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Always display the files have canvas when it is combined with InDesign

  So each file have CS6 that I link in my InDesign CS6 file displays the canvas in the link.

  I bet you that it's a simple correction, ive tried like 30 min, and im tiered of shooting in the dark. Any info would be much appreciated.

  Show import options, and then choose transparent background...