Cannot print on the label Zebra printer when it is deployed to WLS

Similar Questions

• My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  My creative cloud cannot happen on the adobe servers and when I tried to repair the host file using the creative cloud cleaning tool, it displays Error occurred while setting entries HF: 5

  Please let us know your operating system.

  Concerning

  Megha Rawat

• Cannot ping via the VPN client host when static NAT translations are used

  Hello, I have a SRI 3825 configured for Cisco VPN client access.

  There are also several hosts on the internal network of the static NAT translations have a services facing outwards.

  Everything works as expected with the exception that I cannot ping hosts on the internal network once connected via VPN client that is internal IP addresses have the static NAT translations in external public addresses, I ping any host that does not have static NAT translation.

  For example, in the example below, I cannot ping 192.168.1.1 and 192.168.1.2, but I can ping to the internal interface of the router, and any other host on the LAN, I can ping all hosts in the router itself.

  Any help would be appreciated.

  Concerning

  !

  session of crypto consignment

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group vpnclient

  key S3Cu4Ke!

  DNS 192.168.1.1 192.168.1.2

  domain domain.com

  pool dhcppool

  ACL 198

  Save-password

  PFS

  netmask 255.255.255.0

  !

  !

  Crypto ipsec transform-set-SECURE 3DES esp-3des esp-sha-hmac

  !

  Crypto-map dynamic dynmap 10

  86400 seconds, life of security association set

  game of transformation-3DES-SECURE

  market arriere-route

  !

  card crypto client cryptomap of authentication list drauthen

  card crypto isakmp authorization list drauthor cryptomap

  client configuration address card crypto cryptomap answer

  map cryptomap 65535-isakmp ipsec crypto dynamic dynmap

  !

  interface GigabitEthernet0/0

  NAT outside IP

  IP 1.2.3.4 255.255.255.240

  cryptomap card crypto

  !

  interface GigabitEthernet0/1

  IP 192.168.1.254 255.255.255.0

  IP nat inside

  !

  IP local pool dhcppool 192.168.2.50 192.168.2.100

  !

  Note access-list 198 * Split Tunnel encrypted traffic *.
  access-list 198 allow ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255

  !
  Note access-list 199 * NAT0 ACL *.
  access-list 199 deny ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255
  access-list 199 permit ip 192.168.1.0 0.0.0.255 any

  !

  Sheep allowed 10 route map
  corresponds to the IP 199

  !
  IP nat inside source map route sheep interface GigabitEthernet0/0 overload

  !

  IP nat inside source static 192.168.1.1 1.2.3.5
  IP nat inside source static 192.168.1.2 1.2.3.6

  The problem seems to be that static NAT take your nat exemption.

  The solution would be:

  IP nat inside source static 192.168.1.1 1.2.3.5 sheep map route
  IP nat inside source static 192.168.1.2 1.2.3.6 sheep map route

  HTH

  Herbert

• Applications cannot write to the users directory

  Applications have lost administrative privileges. They were OK but now windows live mail cannot create a message, acrobat cannot create temporary files and quark is not yet open. All the same problem, cannot write to the folder "users". When I turn off UAC, all right. I don't want to disable it permanently. I want to diagnose the problem and difficulty so I can restore UAC

  This smells like a folder authorization number. I would check the permissions for the temp and the WLM, using Windows Explorer folder. Here's how you can find their names:

  For the Temp folder:

  1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.

  2. Enter the following command and press ENTER:
  Set temp
  For the WLM folder:
  1. open WLM
  2. click on Tools / Options / Advanced / Maintenance / Shop folder
  Windows updates or AVG updates are extremely likely to be behind this problem, if this is because you would have heard about it a long time ago. I suspect that malware error or a user.

• Cannot create document empty when you open the label printer software

  I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please

  Hi Phaphama,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall the software and check if it works very well.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem still persists, contact the manufacturer for more help and information.

  http://community.Intermec.com/Intr/

  http://www.Intermec.com/support/index.aspx

  http://www.Intermec.com/products/pswlblshop/index.aspx

• Whenever I try to print I get a window 'Print to file' and cannot print the label.

  I print labels on the site of the courier to the United States.  Now whenever I try to print one I get a window 'Print to file' and cannot print the label. So, how can I undo this command?

  Check your default printer, start-> settings-> printer and faxes-> right click on your printer and click "Set as default". I hope this helps.

• When I print USPS shipping on USPS web site labels, the date printed on the label, but I don't want it.

  When I print USPS labels shipping on USPS web site, the date will be printed on the label. Did not do that when I used W2000, started when I went to XP. How can I stop it?

  original title: Date printing on labels

  Hello

  What browser you use on the computer?

  I suggest you to test the issue on another computer.

  I suggest you to check if you are able to display the date in the preview before printing. If you get the date in the preview, then the Web site itself might be including the date. I suggest you to check with the seller for more precision.

• Cannot print on my local printer when you use remote desktop to access the server (Server 2008).

  We are struggling to print on my local printer when you use remote desktop to access the server (Server 2008).  Cannot make it work.  Any suggestions?

  Hi EverettBurton,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Cannot print pdf.  indicates the pages are not selected when everything is selected or 1-12 is selected.  Why not print it and what has changed since he has always worked in the past?

  Cannot print pdf.  Message says pages are not selected when "all" is selected or when the "pages 1-12" is selected.  Why will it not print what is always in the past?

  Hi donw50735963,

  Please try the steps in the following article: Acrobat and Reader help / troubleshooting PDF printing | Adobe Acrobat, Adobe Reader

  Thank you

  Abhishek

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• printer labels ZEBRA GX420T and Windows 7

  Need serious help!

  We have a Zebra GX420T label printer that runs on a computer running Windows XP with IE8, installed a printer GX420t printer with the latest drivers from the Zebra EPL and shared on the same USB port of the printer generic/text printer, this example displays the barcode labels.

  Then when connect us everything on a new Windows 7, with IE9, computer the same installer does not work, try the generic/text only, unique zebra GX420t printer and the credits and the combination pilot EPL and combined with generic/text and GX420T installation, still can't make it work. It prints a bit of code to bars and text but completely false and partial.

  Printed the barcode on a regular printer to two computers, and it shows that all the command line the exactly the same for both computers.

  Anyone any suggestions?

  Hi Falcontech,

  I see that you have problems with the printer when connected to a windows computer 7. I'll help you with this problem.

  1. What is the brand and model of the computer windows 7?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the printer connected to a domain network?

  I suggest you try to run the printer Troubleshooter and check.
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Please see these articles also.

  Install a printer: http://windows.microsoft.com/is-IS/windows7/Install-a-printer

  Printing to the correct printer: http://windows.microsoft.com/en-US/windows7/Printing-to-the-correct-printer

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Print a test page: http://windows.microsoft.com/en-US/windows7/Print-a-test-page

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• HP Envy 4500: Cannot print the error message

  I just replaced the black cartridge of the moment on my 4500 and the printer will not print. I get the error message is - cannot print. Visit www.hpinstantink. Com for info. I did that but it's impossible to find useful info! Help, please!

  Hi @clairerobinson6.

  Welcome to the Forums of HP's Support. I understand that your printer does not print and directs you to instant ink site. I would like to help.

  The printer is in the instant the ink program. He receives this error for two reasons. The printer has not been able to connect to the servers of HP ink level controls or the number of pages in a long time, or there is a bill pending. Normally when you sign in to your instant account of ink there is an opinion on the matter. If you do not see a notification, try to reach out to the instant the ink Department.

  You can send them a tweet directly from your instant ink account, or use this link to find the appropriate phone number.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.