Cannot simulate devices in MAX

Similar Questions

• Can I simulate VirtualBench in Max?

  A few months ago, I submitted a draft with a VirtualBench LabVIEW. Now, I want to come back and work on the project but I have no VB and can't seem to understand how to simulate it in MAX?

  We don't have simulation load max or API. The only "simulation" that is present is the Demo Mode in the VirtualBench application.

• window cannot communicate device or resoucres primary dns server for window 7

  window cannot coommunicate device or resource [main dns server] .dns server is not responding.internet coonectivity has been lost.

  Hello

  When you get the message DNS server responds not?

  You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.

  Method 1

  Clear DNS Cache

  (a) click Startand then type cmd in the Start Search box.

  (b) right click on cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  (c) at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  Method 2

  Restart the Service DNS service

  (a) click Start, clickrun, type services.msc, and then clickOK.

  (b) double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

  (c) in the Startup Type list, click on restart and then clickOK.

  (d) Community Services.

  (e) restart the computer.

  Method 3

  Configure the connection to obtain an IP address automatically.

  (a) click on 'Start', enter 'NCPA.» CPL"(sans guillemets) in the Start Search bar and press"Enter"."

  (b) right click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) highlight "Internet Protocol Version 6 (TCP/IPv6)" and click 'properties '.

  (d) check "obtain an IP address automatically" and "Obtain DNS server address automatically".

  (e) click on 'OK '.

  (f) click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  (g) check "obtain an IP address automatically" and "Obtain DNS server address automatically".

  (h) click on 'OK '.

  (i) restart the computer.

  Check this link for more information:

  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Registry warning: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.

• Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all the other programs of cloud of 2015 but not PP2015.

  Still cannot run Premiere Pro 2015 because 'Cannot find device of appropriate reading' is always on display. I can run PP 2014 and all programs of cloud 2015 but not PP2015. When I got this error, I had a mid-2012 Mac Pro running El Capitan 10.11.2 and an Apple ATI Radeon HD5770.  You can't update the drivers with Apple, but El Capitan should have giving me the latest video drivers.

  First try to open but after loading everything it errored out with the "can't find a video playback device adapted." A very cryptic message in my way of thinking. They mean the monitor, video card or what?  In any case, I decided that I must have my video card, so I bought a 4 GB Nvidia GTX 970 MacCards.com card, put it in and got the latest drivers for it, than MacCards.com current guard.  This resulted in no gain. Always the same result right along with the exact error even after loading the PP2015.

  I reinstalled PPCC2015 yesterday and it still loads but never opens and gives me the same error.  I feel like even if I bought a new MacPro and reloaded all software CC, I'd still have the same result. Very depressed of not being able to run the software I pay for every month.

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

• Cannot find device write VMware esx server 3i image support to.

  Hello

  I'm fairly new Virtualization.

  I downloaded: VMware ESX Server 3i Installable U4, Refresh Version 3.5 Update 4 | 153875-30-03-09 on the site and it burned on a disc. at the start of the disk and following the instructions in the installation guide, I get the following error:

  The installation operation failed!

  The installation operation has encountered a fatal error!

  Cannot find device write VMware esx server 3i image support to.

  The following system information will help the forum of VMWare support with your problem. Please note the information before proceeding.

  Information System

  Manufacturing: abandoned

  Model: abandoned

  Service etiquette: abandoned

  BIOS Rev: SGP4510H.06A.0083.2008.0819.1026

  OK, I can tell that you are new to this sort of thing, using windows XP, it is the best guide I have found for you should you walk through all the way.

  http://www.Symantec.com/connect/articles/how-create-your-own-bootable-ESX-3i-USB-stick

• Is it possible to simulate a XNET CAN device in MAX?

  I ordered one material OR 2 ports 9860-selectable OR XNET C Series Module and 2-wire transceiver capable of CAN - FD.  Of course, my time line for implementation is tight.  I would like to write the driver I need before that happens the hw.  For the many materials OR I can go to MAX and simulate the device.  It seems that this option is not available for communication devices series like the one I ordered.

  Is it possible to simulate my device in order to create a session and debug my driver?

  Thank you

  Mick

  Hi sherlieferdilus,

  There is no way to simulate actual XNET like DAQ hardware modules. For our simulated DAQ hardware, we are able to return dummy data (for example, a simple sinusoid to the analog inputs), but XNET will have something completely different on all buses and behave differently on this basis. More, to use a XNET database for tests must be frames or signals corresponding to the information contained in the database from your CAN Bus.

  That being said, OR XNET is fairly simple to use with a large number of examples in our search example LabVIEW for you to investigate and begin to work from. Also, you should be able to start working on your OR-XNET database, if you have not already and that you plan to use a (this is required by all Sessions of XNET except framework flow Sessions). If you are not already familiar with XNET, I would take this time to study some of the examples and take the time to view our material OR XNET and the manual of the software. In particular, learn about the different types of Session and the types of synchronization you can use so that you are already familiar with them once you receive your material.

  NOR-XNET Hardware and software manual: http://www.ni.com/pdf/manuals/372840l.pdf
  Introduction to NOR-XNET: http://www.ni.com/product-documentation/12375/en/

• Cannot delete the cDaq MAX devices

  I got a new device cDaq today and plugged into pc.

  It appears in MAX as cDAQ4 as I have already had 3 more before all shipped to a customer.

  The question is how can I delete the old ones on MAX.

  If I choose to remove by a right click or button on a panel of MAX, he asked me if I would like to remove it but nothing happened after that.

  I could remove devices in a chassis in this way, but not the frame itself.

  I tried to restart MAX after that and the devoces are still there. Did not attempt to restart the PC again, but don't think it would help.

  What is the solution of this problem.

  Hi Sergey,

  Is - this never happened to you before? What version of MAX, DAQmx and which OS are you using? If it's Windows XP, have you recently installed a Service Pack? Here are a few steps you can try:

  (1) open the Task Manager and ensure that there are no running LabVIEW or VI applications, that is sure to try to communicate with the device (although you would your cDAQ unplugged from your PC in any case)

  2) go to add/remove programs in the Control Panel, down to National Instruments software, click on edit, select the DAQmx driver and click on repair.

  (3) then try to remove the cDAQ, it can work.

  Otherwise, it could be a corrupted Max database, in this case you can follow the steps described in the following KB that you will guide them in creating a database MAX: How can I clean corrupted MAX Database and start with a new One?

  Please let me know if one of these help to solve the problem.

• Cannot delete device tree configuration switchblock

  I physically removed several unused switchblock of 2800 carrier cards, they appear in red x in MAX configuration tree, but there is no option to delete or remove the devices from the tree.  Online help says right-click on the name of the device and select Remove, but there is no option to delete in the menu.

  Hi Bholsinger,

  Thank you for bringing this to us.

  We tabled an error report (CAR # 609019) to address and solve this problem.

  I can't guarantee when it will get taken care of, but it is on the radar of the dev team.

  In the meantime we have two solutions of workarounds for the problem:

  • Remove and re-add the SwitchBlock together carrier
    
    1. Shut down the system and remove the bracket SwitchBlock
    
    
    2. Turn on the system and delete the MAX carrier
    
    
    3. Turn the system pulling back and insert the carrier with the desired modules
    
    
    4. When you re - fuel system, you can reconfigure the carrier as you wish
  • Reset the database to the MAX
    
    1. You can reset the entire MAX database by following the instructions here *: How to reset the database to the MAX

  * If you have configuration data (the names of custom device, scales, tasks, etc.). I would highly recommend you to export your configuration data (file > Export).  You can then edit the file to remove SwitchBlock items you want.  Then restart the system, you can import the file (file > import).  Otherwise, you will need to re-create all your custom data after reset the database.

  I personally recommend the first option because it is the simplest, but please let us know if any of these options works for you. I know that they are not ideal, but I hope that you find them satisfactory in the meantime

  Best regards

  Chris

  National Instruments

• No devices under Max

  Hello again everyone.

  I looked through the other posts and have tried all suggested without a bit of luck. (other that a complete uninstall, re - install)

  I'm forced by my Department to upgrade systems to Windows 7 64-bit and a computer Lenovo ThinkCentre shinny new M series.

  My problem is with MAX v5.0.  I have a PCIe-6351 and a PCI-6052E installed in the system, windows recognizes the card and according to the Device Manager, everything works fine.  The problem is that devices are not appear in MAX under the tree of devices and Interfaces.  I'm refreshing the tree and it is said, it is looking, but he never finds anything.  I used the tools > Reset Configuration option and have nothing done.

  Could there be a security features that are installed that may stop MAX from the voting systems hardware correctly?  Only, I only ask because I was told that some hard enough security practices will be implemented with the new computers, I am about to receive.

  I gained administrative rights and run MAX under an administrator account, but still no luck.

  This is a new installation and I received no errors, everything seemed to install correctly.

  Any ideas how to solve this problem?

  Your help is as always, very much appreciated.

  Steven M.

  Well, my problem is solved. MAX recognizes all my devices and everything works as it should.  The solution is a bit anti-climatic

  The source of the problem was that NEITHER System Web Server (NiApplicationWebServer) service did not, who stopped the mDNS responder service of the race, which, in turn, stopped the service of charger OR to run.

  Try to manually start the MSDN OR system Web Server & National Instruments that service would result in an error 1075, you try to start the device loader neither resulted an error 1068.

  My Department of systems had no ideas on what safety measures or protection of viruses on their end parameters might be the cause of the problem.

  Solution:

  Control Panel > programs > programs and features > National Instruments software > uninstall / change > measure Automation & Explorer > repair.

  After the repair, everything works fine, and all of the above services are running.

  The installation process has shown without errors or problems, so I am at a loss as to why he needed repair.  But whatever it is, problem solved.

  

• How can you add a device in MAX after getting the error 200220

  Hello

  I get the following error message when I start my datalogging software

  

  When I opened MAX, I noticed that the device NOR I use (USB-TC01) is not listed.

  

  Someone out there would be able to let me know how to add the TC01 device? I know that I need to go to the icon "create new" devices and Interfaces, but do not know how to proceed after that. I get the next screen but not sure what to select.

  

  I use the 9.0.2 version of NOR-DAQmx driver on Windows XP operating system.

  Thanks for your time,

  Kevin

  You may need to update your DAQmx driver.

  Look at this page.  http://sine.NI.com/PSP/app/doc/p/ID/PSP-916/lang/en

  All versions of DAQmx listed are more recent than the 9.0.2 you use.

  Also, take a look at this message thread.  http://forums.NI.com/T5/instrument-control-GPIB-Serial/NI-USB-TC01-not-found/m-p/1454196?requireLogi... which seems to confirm.

• QUESTION: Two different serial numbers for a device in MAX?

  The camera I use is a 34405A agilent.  It is connected via USB to a windows XP computer.  I was running my software from one day to the next.  When I came back I got an error saying that it could not communicate with the device.  I looked at MAX, and there was a new SN in the name of the resource.  After that I have repowered the agilent, the correct SN is back.  Can someone explain to me what happened?

  MAX Version 4.6

  Agilent IO 5.5

  I found the problem and the solution to my problem.  The problem was the Agilent I used, I have reserached the firmware of this device history and there is a known issue that was be fixed in an update.  After you Flash the firmware, I got no problem with the Agilent.  Thanks for the help.

• Cannot start device USB (code.10) error

  Original title: device usb ayre

  Cannot start this device (code 10)

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers: http://support.microsoft.com/kb/943104

  Hope this information is useful.

• Windows XP cannot open Device Manager

  Try to install a program and they tell me to open the Device Manager and update driver. When I click on Device Manager, I get an error saying "windows cannot find mmc.exe. What I have to do. Reloading is not an option, I don't have the disk that came with my system. Running Windows XP Media Edition, Version 2002 SP3 Canter. Any help would be great. I can get around but still a novice.

  Please stay with your original on this problem thread, especially because it has nothing to do with the Windows Update feature: http://social.answers.microsoft.com/Forums/en-US/xpfiles/thread/a39c7185-39a6-4dbf-8558-6f4e53975d21

  Thank you

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot start device code (10)

  Just for reference, my laptop is a gateway m465-e If this will help the answer
  in any case this is the problem even after installing my audio driver for sigmatel high definition audio device gives me a code 10 error appliance cannot be started. By the way I got the pilot of many different places, some are gateway, Device Doctor and same day microsoft technical support none of them worked to solve the problem

  http://support.Microsoft.com/kb/310123 hope this helps, Gerry Cornell

• Remote access ASA - cannot access devices inside or outside

  Hello

  I have an ASA550: I configured a VPN IPSEC and can connect to the ASA and I can access the CLI.

  I can access internal devices of the ASA and I can access the internet.

  However, I can't access internal devices or over the internet from the computer connected to IPSec.

  Any help is appreciated!

  Here is the config:

  ASA Version 8.2 (5)

  !

  host name asa

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.47.70.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.240

  !

  passive FTP mode

  access extensive list ip 10.47.60.0 inside_nat0_outbound allow 255.255.255.0 10.47.70.0 255.255.255.0

  outside_access_in list extended access permit icmp any one

  outside_access_in list extended access permit udp any any eq

  outside_1_cryptomap list of allowed ip extended access all 10.47.60.0 255.255.255.0

  IP local pool hze_dhcp 10.47.60.10 - 10.47.60.41 mask 255.255.255.0

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  dynamic-access-policy-registration DfltAccessPolicy

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Crypto isakmp nat-traversal 3600

  management-access inside

  dhcpd dns 10.47.70.3

  dhcpd option 3 ip 10.47.70.1

  !

  dhcpd address 10.47.70.50 - 10.47.70.81 inside

  dhcpd allow inside

  !

  WebVPN

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of server DNS 8.8.8.8

  Protocol-tunnel-VPN IPSec l2tp ipsec

  attributes global-tunnel-group DefaultRAGroup

  address hze_dhcp pool

  Group Policy - by default-DefaultRAGroup

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  !

  global service-policy global_policy

  context of prompt hostname

  Hello

  I don't think you have dynamic PAT configured for traffic from the VPN Client user who is supposed to browse the Internet through the connection WAN ASAs.

  Try adding

  NAT (outside) 1 10.47.60.0 255.255.255.0

  Also, the "packet-tracer" you question is not simulate the connection from the VPN Client. The user of the VPN Client is not behind the 'inside' interface and the Clients VPN address space does not include the IP 10.47.70.20.

  When the Client VPN connection is active, you can use the command "packet - trace"

  entry Packet-trace out tcp 10.47.60.x 12345 8.8.8.8 80

  While of course, replace 'x' with the real IP that the user got to the ASA

  -Jouni