cannot start missing the version of directx for gta4

Similar Questions

• How can I find the version of DirectX I have on Windows XP?

  How can I find the version of DirectX I have on Windows XP?

  Click Start / run and type

  Dxdiag

  and press ENTER to get information about your system, DirectX and other useful information.

  UTC/GMT is 02:19 on Sunday, January 1st, 2012

• any time, I try to open adobe photo shop elements 2.0 it says could not start because the volume windows uses for virtual memory did not enough of free space see windows help for more information

  When I try to open adobe photo shop elements 2.0 message that says: cannot start adobe because volume windows uses for virtual memory doesn't have enough free space, which could lead to stability problems see windows help for information can help you

  Hi gregoryandme,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the Adobe photo shop program.

  Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I installed the German version of Photoshop, now I need the version in English for some actions, that I bought. In Photoshop preferences is German and I can't change to English. I changed my Creativ cloud in English, but does not work for Photoshop. I do

  I installed the German version of Photoshop, now I need the version in English for some actions, that I bought. In Photoshop preferences is German and I can't change to English. I changed my Creativ cloud in English, but does not work for Photoshop. What do I need to reinstall Photoshop in English?

  Also if you wish, you can take back to the top of Presets, plugins... before uninstalling.

• Help! For an assignment, I need to use InDesign 2014 to make a digital item. I have the CC with 2015. How can I get the version of 2014 for my Mac

  Help! For an assignment, I need to use InDesign 2014 to make a digital item. I have the CC with 2015. How can I get the version of 2014 for my Mac

  Sorry, I can not explain this. It is not sensible.

  Try going to your cloud creative desktop App. Click on the "gear" icon > Preferences > General. Sign out and then sign in using your Adobe ID and see if it looks different.

• virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  virtual machine cannot start, because the snapshot of the virtual machine has been deleted by mistake.

  When I start this virtual machine, it prompts: unable to find the 0001.vmdk, this disc is my shot, has been deleted by mistake.

  How to restore this virtual machine.

  You need help with a revival of the 000001.vmdk deleted or do you want to repair the virtual machine so that it works without the snapshot?

  The last option, follow these steps:
  remove the virtual machine from the inventory and edit the vmx file so that it uses the basedisk. Then add the virtual machine to inventory.
  If you need data from the snapshot call me through Skype "sanbarrow" - I may be able to help

• I have Adobe CC full membership, but I subscribed last year, can I use the version of 2015 for products so now?

  I have Adobe CC full membership, but I subscribed last year, can I use the version of 2015 for products so now?

  Hi, Ahmed.

  Yes, since you have an active subscription for creative cloud, you will be able to use the 2015 version.

  You can update applications until 2015, without paying anything Extra.

  I hope that answers your query!

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• Internal error during the installation of DirectX for the user final web runtime install

  Hi all

  I was browsing the forums and reading the discussions that relate to my question.  Unfortunately, each of the solutions that I found do not seem to solve my specific problem.
  I recently got a new laptop (Dell E6540) and thought I'd try world of combat aircraft.  My old laptop did not have a graphics card that has been up to the task, but I think this one does.
  I am running Windows 7, which integrates the latest version of DirectX (11).  I downloaded and installed the game, and when I click on 'Play', I get the message informing me that I'm missing the d3dx9_43.dll.  I then visit the Microsoft Download Center and try to download the installer of web runtime DirectX end-user.  Following the installation of the components in the stage of finalisation of the web installer, I get the following message:
  "An internal system error has occurred.  Please refer to DXError.log and DirectX.log in your Windows folder to determine the problem. »
  I then click OK in the error message, the web installer shows failed to install, so I click "Finish."  At this point, the popsup Program Compatibility Assistant, saying: the program may not be installed properly and gives me the opportunity to 'Reinstall using recommended settings', what I'm doing.  Then run the web installer a second time, giving me the same error internal system presented above.
  I wonder if someone might have suggestions as to how I can resolve this issue (or to find the above mentioned .log files).
  Thanks for your help.

  While Win7 installed DX 9, 10 and 11 it does not install with all files.
  d3dx9_43.dll is the latest DX 9 files.
  The best method when you have not already updated DX is to use the DX Web Installer,.
  then you can try using them.
  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  If you have the same problem with the DX Web Installer trying to boot into Safe Mode with networking
  and try to run the installation program from there Web DX.

  -L' Web Installer does not overwrite the DX files, it only installs the DX 'missing' files, so when it
  is a DX of corrupted files and you do not receive an error with the name that you will need to use the full
  DirectX Redist (2010), which I assume is what you are trying to use, as this will overwrite all the
  DX files.
  -Similarly, you can use Safe Mode (networking not required that you have all files) may
  be used when there is a problem installing DX with the complete installation program.

  -When there is a corrupted file of DX and you get the name of this file, an error, as with
  your d3dx9_43.dll, you can delete this file in System32 (sysWOW64 when using 64-bit
  Windows) and when you run the Web Installer will replace the now "missing" with a new file
  copy.

  Absence of the foregoing, it may be your problem is more to do not have the necessary permissions to
  install the DX.
  This could be due to UAC settings too high, does not not as administrator or another
  restrictive framework, maybe even your anti-virus (disable temporarily when trying to install DX).
  Try - R / click the DXSETUP.exe. Then go to Properties-compatibility and check the box
  next to the race... as an administrator.
  .

  .

• Cannot start after the formatted NTFS partition

  Option to boot OS X suddenly absent after that I formatted the partition NTFS (bootcamp) of Windows installation.

  

  I read many previous question in many Web site and

  I tried to fix it in disk utility, but it cannot go up more.

  user mode single launch I tried, but it does not start.

  already reset NVRAM and SMC.

  Is there not any solution to start again or access my files in the partition mac to back up?

  Thank you.

  Somehow, you managed to format your OS X with making it unusable NTFS volume. I recommend you do the following:

  Clean Install of El Capitan

  Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.

  The Utility Menu appears in 5 to 20 minutes. Be patient.

  Select disk utility, then click on the continue button.

  When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.

  Click the Partition tab in the main window of disk utility. A panel will fall.

  Set the GUID partition scheme.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then click the fact when it is active.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

  This should install it the version of Mac OS X that has been previously installed when the computer was new.

• Cannot start in the middle of the upgrade from Vista to Windows 7

  Try to upgrade one of our own machine for future larger deployments. Windows Vista business to Windows 7 Professional.

  A ran the Advisor Windows 7 and got a little nudge upward after updating Nvidia 7300GT drivers for Windows 7 plug.

  It goes through the process, gather information, copy files... etc. 90 minutes later, it stops and tell me that it cannot start depui this facility. Click here and out you go!

  Don't want to do a clean Reload because tons of the toreinstal program.

  Any suggestions?

  Thank you

  Michel

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• URGENT! Cannot start from the HP recovery discs.

  I am facing a problem weired with the help of HP recovery disks (ordered from HP).
  HP drives are bootable, I checked on another desktop not HP. My Pavilion cannot boot from HP discs, but it starts on the other Windows 7 bootable disk. Even this drive gives me the error to the expansion of the files windows to 52%. It says failed to load the driver for the drive and asks me to select the drivers, so I inserted the disc Driver from HP, but it says nothing found.

  I tried to use HP discs after, whole HARD drive then create 100 MB system reserved partition (NTFS), 100 GB NTFS for the C drive for installation of Win; but still no luck. After selecting CD/DVD in the start menu, the continuous cursor to blink on the left corner for a few 10s of seconds and the system reboots without any messages.

  When I tried with Linux Mint 14 KDE startup disk, it installed smoothly without any mistakes and right now, I'm using Linux.

  So this is a strange problem where I can't decide what thing is defective; If my reader DVD, DVD or my Pavilion. But all work to differnet scenarios. Please suggest a solution if you know.

  Help, please!

  Thank you!

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  Hard reset did the trick!
  Retrieved using HP discs!

• Cannot start on the Windows XP operating system on the second hard drive

  Original title: 2nd DRIVE PROBLEM

  2nd hard drive runs xp pro primary is prim vista home cannot get the xp disc to start, but can still use it for storage would start xp drive has worked on the old computer (then both drives where xp) all things to try thanks

  Try the procedure described on the site below

  http://www.ehow.com/how_2029534_boot-Vista-XP.html

• version of directx for emachine with windows 7 Home premium 64-bit

  I have an emachine windows 7 64 bit with processor intel pentium E5800, hard disk of 1 TB, multi-in-1 card reader and is EL1852-52W and intel GMA X 4500 grafics. What version of directx should install for everyday use best game and general?

  Win7 has three versions of Direct X 9, 10 and 11, but there isn't any files when it
  moved first, if you run Web X Direct Setup to update DX.

  Download details: DirectX end-user performance

  The intel GMA X 4500 integrated graphics is, OK to use in video and on a daily basis, but unfortunately
  not suitable for games more basic graph.

  GMA X4500MHD benchmarks

  Note that less than 30 fps frame rates are undesirable and below 20 fps are usually unplayable.
  .