Canon PIXMA 620 and Win 7 64

Similar Questions

• Printer Drivers MP - connection failed - Canon Pixma MG2570 on Win 8/64 OS and OS Win 7/64

  Hi, I bought the Canon Pixma MG2570 last week and I was not able to install drivers MP on my Sony Vaio Win 8/64 OS or a Lenovo Win 7/64 OS. I tried to install from the CD provided and failed in my attempts. He gets hanged on step 3, the screen of printer connection and I had to uninstall and reinstall the number of times software. Even so, he didn't. I downloaded a few times most recent drivers on the canon website, but I failed to properly install the printer. Please help me to install this printer on my devices with the above configuration. I am not able to solve this problem despite troubleshooting provided in the manuals online as well.

  Thank you

  Sampath Prakash

  Thanks Srimadhwa for the reply.

  I thought that it was with the usb cable provided with the printer, it was not connected properly where the error on the screen. The MP drivers got instantly installed on the system. The Canon Pixma MG2570 printer works also perfectly on os Win 8/64 and Win 7/64 os. Thanks again.

  -HOMELESS

• I have a canon pixma 210 and lost the installation disc an idears

  I can't find the disc of installation for my canon pixma 210 y at - there some way around this or any idears, please?

  Have you tried to visit Canon website to see if the drivers and software can be downloaded here or a re-ordered installation disc?

• Problem Canon PIXMA MP760 and Windows 7

  Hello.

  I just installed Windows 7 and tried to connect my printer (Canon PIXMA MP760). He finds some drivers it cost but it showd a mistake and this seems to be the main engine.

  I have also tried to download driver from here https://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20PIXMA%20MP760%20Photo%20All-In-One%20Printer&v=Canon&uid=9792A005&pf=0&pi=4&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit

  But when he took out and so now he appears just "check the connection of the cable between the printer and the computer... blabla".

  I tried to reconnect the printer, enable/disable, restart the pc, checked the cable connection +++ but I can't make it work.

  When I go to devices and printers, I see that the scanner of the printer part appears as a device, but not the printer itself.

  Someone has any advice on what to do to get it working?

  EDIT: I also tried to install the printer on another computer with windows 7. Same problem there. :(

  Hi printerhelp,

  Please do not forget to go to the Canon website to download the software and drivers for Windows 7, as the two look update:

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&ModelId=11010

  If this isn't your correct printer, you should be able to look it up directly on the Canon site.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a Canon pixma mx922 and seems to only print photos... How do I print a document?

  I bought my mom a mx922 pixma to print from your iphone / ipad.  She was printing documents, then pictures, and now she doesn't know how to print the document.  Can anyone help with this?  I'm not in the same State as him, and she is not very tech saavy...

  Hi RONNA999,

  Please check that the PIXMA MX922 is connected to the wireless network:

  1. press the

  button on your MX922 PIXMA.

  2. Select Setup and press the button.

  3. Select device settings, and press .

  4. Select settings LAN, then press .

  5. Select Configuration Wireless LAN and press .

  6. Select your wireless network and press .

  7. Enter the wireless network password and press .

  The PIXMA MX922 will now be connected to the wireless network and it will be able to print from the iOS device.

  Please note that Canon Forum is not intended for immediate help, but a place for the community to give you help and comments. If there is a need for emergency assistance, please use the link below to join our friendly technical support team:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Old printer Canon Pixma MP500 and fairly new Acer Aspire Netbook.

  I have a CanonPixma MP500 Printer/scanner/copier that worked very well. on my desk. I now have an Aspire One Acer Netbook and I have set the printer after buying a lot of expensive ink and hooked it up to netbook - generally things are taken & play... Cannot get this to work at all. I'm puzzled. Can anyone help?

  What version of Windows is on your new netbook?

  How were you trying to set up the printer?

  • I have just connected it and expected to work
  • I used the Add Printer Wizard
  • I inserted the CD that came with the printer and started the installation routine
  • I downloaded the software from the Canon Website and he ran

  That's happened?  If you got an error message, please quote completely, without paraphrasing.

• Unable to connect w / Canon Pixma MX860 printer now I ElCapitan.  Need to print today... any suggestions?

  Just upgraded to El Capitan and now cannot connect with Canon PIxma 860 and not financially able to buy a new printer... no workaround solution suggested?  Canon has written is not compatible with El Capitan.  I have to get off at Yosemite?  Thank you.

  http://GIMP-print.sourceforge.NET/MacOSX.php

  This link should make your printer work again.

  That said, I've not heard of Captan El is not not compatible. But this fix should work.

• Canon Pixma mg3200 do not print

  I just bought a Canon Pixma MG3200 and I can't seem to print on my HP laptop Windows 7 x 64... someone at - it advice?

  Moved from feedback

  Original title: Canon mg3200 will not work

  Hello Deborah,.

  The simple answer is to go to the canon website and download the driver here: http://www.usa.canon.com/cusa/support . You will need specific printer model number. This approach will you get the latest driver, avoid any problem of corrupted drive and give you a forum site for questions specific to the printer.

  Let me know if this helps you.

  Kind regards

  BearPup

• Canon Pixma MG6250 - CD printing (plate G)

  Background

  I'm running an iMac with 10.6.8.

  Adobe Illustrator 14.0.0 (CS4)

  My previous printer was a HP C5380. Print directly on CD from Adobe Illustrator was not easy. Design the layout, select print and choose "CD" paper size. Fact. The necessary replacement HP and HP have most any printer with CD printing capability.m

  New printer

  I got the Canon Pixma MG6250 and normal printing as it should. This printer has a small plateau (called 'Bin G') that you place the CD on and then insert the tray in a slot (inside the slot of the main paper), this slot is accessible via a drop down "inner cover" you need to manually open. Then you place the tray (with the CD on this subject) in this slot and two white arrows align. The printer must then pull this tray inside and print. (It was how the HP printer works too)

  Problem

  When I select "File - print" in Adobe Illustrator, I then select 'Media' and the option 'disk tray G '. I have selected this option, click 'print '.

  The printer displays an error saying "Inner cover open. Close the inner cover and select OK"

  When I do that I get a second error message saying "tray back. There is no paper. "Load paper and click OK"

  If I don't have a paper in the rear tray, the image I want to print on the CD, prints on the paper (that you expect the sequence of messages)

  Does anyone have a solution to this problem? It makes me crazy...

  Concerning

  John

  I have one of these printers as well: you must use the Canon software to print on CD. write a PDF file first, and then print it with the Canon software.

  You should complain to Canon if you don't like that.

• Canon pixma PIXMA MX459 and mx452 the same?

  Canon pixma PIXMA MX459 and mx452 the same?

  Thanks for the reply. I bought the MX459 and thought that I had an outdated model.

• I have a Canon Pixma MX 880 and when I try to edit or delete photos on my SD card,

  I have a Canon Pixma MX 880 and when I try to edit or delete pictures on my SD card, I get the following error:

  "You must be authorized to perform this action" and below:

  'You need permission of the administrator of the computer to make changes to this file.

  Wireless printer is installed.

  I am registered as an administrator, do not have access to any user account.

  The old problem mounted HP Photosmart I replaced, I could change, remove, etc. without problems.

  Hi ehnco,

  It seems that the read/write on the printer attribute must be changed.  Use the following steps to change the read/write attribute:

  1. Make sure that the machine is turned on
  2. Press the Setup> button.
  3. Use of the the button to select [ device settings], then press the button.
     The device settings screen appears. 
  4. Use of the the button to select [device user settings], then press the button.

• Canon Pixma iP1500 printer and it connect not gives an error code 20

  I have a canon Pixma iP1500 printer and it does not connect gives an error code 20?

  Hello

  1. If it works much earlier?

  2. did you make any changes before this problem?

  3. What is the exact message you received?

  I suggest to go through these steps and check.

  Method 1:

  This is due to the UAC. Disable UAC will help because UAC prompts the user the permission to continue, the time required to get the question and answer that cause the printer to turn it off.

  If you do not want to activate UAC you can call EnablePrinter when the capture of the EnablePre() event generated by the driver.

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Uninstall the printer driver, download the latest driver on the manufacturer's website, install on your computer and check.

  Step 1: you can download the latest driver from the link below http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1500#DriversAndSoftware

  Step 2: Uninstall the device from Device Manager driver.

  a. right-click on the icon my computer

  b. Select manage from the menu.

  c. Select Device Manager in system tools that are listed in the resulting display.

  d. right-click on the device.

  e. click on the driver tab.

  f. click on uninstall.

  g. restart the computer

  Step 3: Installed the downloaded printer driver and check out them.

• CANON PIXMA MG3250 PRINTER - seeing yellow (danger?) in the top left corner and the printer does not print

  Original title: Ms. Sue Somerville

  CANON PIXMA MG3250 PRINTER

  Yellow light (danger?) in the top left corner and the printer does not print. It was OK until I changed the inks.

  I lost instructions and can't download the manual though, like many others I tried for hours!

  I used little of this printer and just need to do simple, but urgent tasks.

  Are we supposed to it's bin and get another, then we can just get instructions and resume our work?

  I don't know about spacing in your message.  Heh

  This is a question for CANON - those who make and take over the device in question.  Everything you describe indicate that this is NOT a computer / software somehow problem and the problem would be the same if the device was not connected to any computer at all, an OS X one or a Linux one...

  These are the Microsoft forums.

  Here is the Canon forums:
  http://community.USA.Canon.com/T5/Canon-Forum/CT-p/Canon_Forum

  Here is a link to the manual for the device:

  http://www.Canon-Europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg3250.aspx?type=manuals&language=en#Disclaimer

  I suggest out of ink, check you removed all the "stickers" on the ink that * need * to be removed to work properly and make sure that the ink properly.  Print the pattern check nozzles and then to make sure that everything is installed properly:

  1. Make sure that the power is turned on.

  1. Load a sheet of A4 or letter paper format in the front tray.

  1. Open the output tray extension, open the paper output tray, and then extend the output paper support.

  1. Print the nozzle check pattern.

  (1) press on the button in Maintenance for poster has.

  

  (2) press the color or black.

  The ground of review of the nozzle will print.

  1. Review the rationale for control of the nozzle.

• Canon Pixma wireless scanning with MBP 10.11.6 mg3220

  Suddenly, from one day to the other, the scan wireless function no longer works between my MBP (OS 10.11.6) and the Canon Pixma MG3220 printer/scanner. I downloaded the driver of Canon more up-to-date, but eliminating the possibility of using the Image Capture.

  How to restore the wireless function? Is it possible to uninstall this latest driver and reinstall the driver of the Mini Master of Canon, good through 10.8 OS?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

• I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.

  I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.  It prints very well I can't scan and save.

  I can't find the printer drivers specifically for Yosemite on the Canon website.  How can I get this analysis and save them?  I have never installed this printer on my iMac.

  Have you tried the Applications/Image Capture or VueScan?

  VueScan

  VueScan FAQ