Canon Pixma iP1600 Inkjet Photo printer

Similar Questions

• Canon Pixma ip1600 drivers required. Lost my origial installation CD. Help!

  Help! Canon Pixma ip1600 drivers required. Lost my origial installation CD. Just got a new PC, but... Cannot use my printer because of mentioned clearly.

  You should be able to download the drivers and software you need to:

  PIXMA iP1600 - PIXMA iP Series
   http://USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1600#DriversAndSoftware

  Make sure you get the bit-version appropriate for your Windows 7 system, that is, (x 86) 32 - bit or 64-bit (x 64).

  I hope this helps.

• Why does work ' people Canon pixma ip1600.

  Why does'n canon pixma ip1600 printer works.

  Hello

  How do you mean it doesn't?

  Try the latest driver of Canon, but make sure you get the right software 32-bit or the 64-bit...

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1600#DriversAndSoftware

  Greetings

  GT4U

• Printer (Canon Pixma MP480) do not print

  My Canon Pixma MP480 won't print on my computer, but print on other computers that do not have Vista. I installed the driver several times more directly from the cd that came with it and directly from canon website. I am registered under an account to administer. It is directly connected via a USB port. The strange thing is, it's an all-in-one printer, scanner, copier, and it allows me to scan images on my computer. When I try to print a document, it times out. No error message appears on the printer LCD. It works on my friends computer that uses windows XP... My operating system is Vista 64 x.  If anyone has any advice I would be recognizing an email to

  Hi davemsee,

  Have you try to download the latest driver for your printer from Canon?
  Make sure that it is the Vista x 64 bit driver when you download and install.  Remove the old driver completely and restart the computer before the upgrade to the new driver.

  Post back with the resulf so we can provide you with more support, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Canon SELPHY ES1 Compact Photo Printer - device driver needed

  Need to find the driver for

  Canon Selphy ES1 Compact Photo Printer

  The site of Support of Canon for the SELPHY ES1 has 32 and 64 bit Windows 7 drivers: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/selphy_compact_photo_series/selphy_es1#DriversAndSoftware

  How do you know if you are running 32 or 64 bit Windows 7: http://windows.microsoft.com/en-US/windows7/find-out-32-or-64-bit

• How the printer canon pixma ip can run printing black ink

  I put new inkjet for printing paper and now the colors of work but the black ink doesn't work is not black is 3rd number and 6 Please help me

  Hello

  I'm sorry, but it's the installation of vista operating system instance

  go to the Canon Website and are looking for a manual for your model of Canon printer on how to use

  try looking there under Support and drivers

  http://USA.Canon.com/Cusa/home

  or repost in forum Hardware

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

  but you have to be lucky to find someone who knows this printer

  and give them the model number, not only the pixma ip

• Canon Pixma mg3200 do not print

  I just bought a Canon Pixma MG3200 and I can't seem to print on my HP laptop Windows 7 x 64... someone at - it advice?

  Moved from feedback

  Original title: Canon mg3200 will not work

  Hello Deborah,.

  The simple answer is to go to the canon website and download the driver here: http://www.usa.canon.com/cusa/support . You will need specific printer model number. This approach will you get the latest driver, avoid any problem of corrupted drive and give you a forum site for questions specific to the printer.

  Let me know if this helps you.

  Kind regards

  BearPup

• Canon PIXMA MX922 User Guide: printing on a blank disc with the Canon PIXMA MX922 all-in-One

  Please ignore my previous post, which should be sent on the Canon Support Forum.  Sorry for the confusion.

  Uh, just to let you know this isn't the Forum HP printer, Canon.  For questions, contact the good folks at Canon.

• Canon Pixma MG3100cant use to print wireless

  I installed it,., he used a lot before... now it won't print or scan from my laptop... but now I have a new network and lost Disc... but it works very well for my husband on his desk, he will not be printed repeat me printing error... can u please advice?

  CCFC salvation!

  Welcome to the Canon Forums and thank you for your inquiry! Thank you for your participation, but we need to let you know that your product appears to be a model that is not supported by our team here at Canon USA. Canon Forum is organized and hosted on the territory of the United States by Canon USA. We are only able to provide support for the products of Canon produced for and used in the U.S. market. If you live outside the United States, please click here and select your country or region for your support needs. Feel free to discuss products Canon sold outside the United States, but please be aware that you won't receive support directly from Canon USA.

• Printing problems with a Canon Pixma MX882 do not print the correct paper size.

  This is a new PROBLEM.  Never had this problem before.

  I'm under Windows8, 64 bit.

  I am suddenly unable to print all labels postage to NORMAL size = 100%.

  He coinstantsly everything shrinks to half size no matter what I change settings.

  I've looked through the software and the printer settings and may NOT know what is the cause of the problem.

  The assumption is that MS Updates caused the problem.
  The resolution has been going to the Canon USA site.
  The very recent updated drivers was available for my printer.
  Download and install the updated drivers solves the problem.

• Cannot print wireless with Canon Pixma MG3120 but can print via USB

  Original title:

  thing.i same cannot connect wireless on mypixma mg3120 printer.did reinstall and shows ok to print, but will not go wireless when I disconnect usb setup cord.tryed everything to fix.

  Hello
   
  Method 1:
   
  Check out the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
  Method 2:
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  Step 2: Install the drivers from the disc and check.

• Not able to print from the Canon Pixma MP495

  Original title: Canon Pixma MP495

  my printer does not finish printing, it still shows half a page then the paper stops and stops printing

  (1) first check printer cable is properly inserted into the correct port

  (2) change the new cable and check or another port and check

  (3) make sure that cable should be less than 1.5metres length

  (4) see below for the output of the page and choose your model

  http://www.USA.Canon.com/Cusa/consumer/standard_display/resources-and-learning-consumer/reference_materials-consumer/Page_Yield

  (5) see below link for the method of speed of the page and choose your model

  http://www.USA.Canon.com/Cusa/consumer/standard_display/resources-and-learning-consumer/reference_materials-consumer/PrintSpeed

  (6) downlaod an installation of Solution Menu EX version 1.4.0 (Windows 8/8 x 64/7 /... )  at the bottom of the link

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp495?selectedName=DriversAndSoftware

  (7) downalod and install My Printer version 3.0.0 (Windows 8/8 x 64/7/7 x 64 /... link below)

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp495?selectedName=DriversAndSoftware

  Guilbert

• Canon Pixma MG6250 - CD printing (plate G)

  Background

  I'm running an iMac with 10.6.8.

  Adobe Illustrator 14.0.0 (CS4)

  My previous printer was a HP C5380. Print directly on CD from Adobe Illustrator was not easy. Design the layout, select print and choose "CD" paper size. Fact. The necessary replacement HP and HP have most any printer with CD printing capability.m

  New printer

  I got the Canon Pixma MG6250 and normal printing as it should. This printer has a small plateau (called 'Bin G') that you place the CD on and then insert the tray in a slot (inside the slot of the main paper), this slot is accessible via a drop down "inner cover" you need to manually open. Then you place the tray (with the CD on this subject) in this slot and two white arrows align. The printer must then pull this tray inside and print. (It was how the HP printer works too)

  Problem

  When I select "File - print" in Adobe Illustrator, I then select 'Media' and the option 'disk tray G '. I have selected this option, click 'print '.

  The printer displays an error saying "Inner cover open. Close the inner cover and select OK"

  When I do that I get a second error message saying "tray back. There is no paper. "Load paper and click OK"

  If I don't have a paper in the rear tray, the image I want to print on the CD, prints on the paper (that you expect the sequence of messages)

  Does anyone have a solution to this problem? It makes me crazy...

  Concerning

  John

  I have one of these printers as well: you must use the Canon software to print on CD. write a PDF file first, and then print it with the Canon software.

  You should complain to Canon if you don't like that.

• CANON PIXMA MP160

  I just bought a new desktop PC HP S5 - 1435D.

  Have connected the Canon PIXMA MP160, but cannot print documents.

  I just bought a new desktop PC HP S5 - 1435D.

  Have connected the Canon PIXMA MP160, but cannot print documents.

  Hello

  Hello

  Step 1: Check with the manufacturer for the latest Windows drivers for the device.

  Canon USA: Support & drivers: PIXMA MP160 #DriversAndSoftware:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp160#DriversAndSoftware

  In the drivers and software section, use the drop down menus to select your operating system and version.

  Expand the menu to link drivers and installation instructions, see the download.

  Step 2: If Canon does not have Windows 8 drivers available for this model, check the drivers that are available for previous versions of Windows.

  If these documents are available, install the driver in Compatibility Mode.

  1. download the driver for the previous version and place it on your desktop.

  2. right click the driver installation file and select Properties / Compatibility tab.

  3. place a checkmark in run this program in compatibility mode for.

  4. in the drop-down menu, Select the previous version of Windows.

  5. click apply / OK.

  6. right click the Setup file and select run as administrator .

  Step 3: If none of this does not work, check with the support of Canon or the support forums of Canon for people who may have found a solution.

  Canon U.S.A. - Support Contact:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon user Support Forums:
  http://forums.USA.Canon.com/

  Concerning

• Can't scan from the Canon Pixma MP280, error: 2,151,44.

  Original title: 2,151,44 error code

  installed new Canon Pixma MP280

  fine prints

  no error analysis, becomes 2,151,44

  Hello

  (1) what is the exact full error message?

  (2) what happens when you connect the printer/scanner on a different USB port?

  Given that the problem is specific to the scanner, I suggest you to contact Canon for assistance.

  http://www.Canon.com/support/