cant able to default printer brother mfc j430w?
I have the same problem with a Brother DCP-J4110DW, however, the links in this article no longer work.
Separate from this thread
Hello
Please contact Microsoft Community. I understand that you have a problem with the current printer setup. I also see that you weren't able to open Microsoft Article links proposed in the previous post. I suggest you to check if you can open the following items and try the procedure described in this. Check if it helps.
This problem could occur due to incorrect printer settings. Try the steps listed here and see if it helps:
Method 1:
I suggest you to run the printer Troubleshooter to check if the base printer settings are set correctly. Check if it helps.
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Method 2:
If the problem persists, I suggest you try the steps in the article, which will be to identify and solve common printer problems in Windows. Check if it helps.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
Method 3:
If the problem persists, I suggest you to check if the problem occurs on a new user account or not.
Create a user account
http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-7
Check out the link for more information.
Change your default printer
http://Windows.Microsoft.com/en-in/Windows7/change-your-default-printer
Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
Tags: Windows
Similar Questions
-
"The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.
I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?
Yes, you can try to replace localspl.dll winprint.dll
Create a restore point from the system beforehand and restart the computer later.
-
Brother MFC-J430W all-in-One printer driver
need a driver to be able to print photos from my windows picture program. What should I do?
Drivers for Brother MFC J430W are available on the brother Support site. The printer driver from a 'windows picture program"would normally be the same driver, the printer needs for all printing. The reader can be downloaded from: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfcj430w_all
-
Why not print our model Printer Brother MFC-8885CW
We tried for several days to get our brother model MFC-8885CW printer to print! We use Windows 7 Pro. Edition if that helps any. Please let us know how you worked your printer driver? Sincerely, Bob and Connie Richards in Iowa City, Iowa.
Hi Bob,
Thanks for posting your query in the Microsoft Community Forums.
According to the description of the problem, it seems that you cannot print using printer Brother MFC-8885CW.
I would appreciate it if you could answer the following questions to help you best:
1. what happens when you try to print?
2. do you get an error message?
3 did already worked on the computer?
4 have have there been recent changes made on the computer before the show?
I will certainly help you with this issue.
Here are a few methods that you can try in order to solve the problem of the printer.
Method 1: Run the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-printMethod 2: Update the printer drivers and check.
Install the latest version of the drivers from the following link and check.
Find and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
For more information, see the link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.
-
All-in-one printer, Brother MFC-9700
I have a new laptop that has a Windows 7 operating system. It does not recognize my printer Brother MFC-9700. I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system. How can I determine that?
In addition, I don't want to crush by current drivers that work with my old computers. This download may be a driver separately on my printer?
I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer. Access to the laptop is via a wireless router only.
Any suggestions/step by step directions about the conduct of a download would be useful. I'm a Novice Senior. Will be
I have a new laptop that has a Windows 7 operating system. It does not recognize my printer Brother MFC-9700. I found a site that appears to let me do a free download - but for compatibility status, he asks if I have a 64-bit or 32-bit system. How can I determine that?
In addition, I don't want to crush by current drivers that work with my old computers. This download may be a driver separately on my printer?
I want to make the download of my new laptop - or just use my old computer to download the Windows 7 driver for the printer. Access to the laptop is via a wireless router only.
Any suggestions/step by step directions about the conduct of a download would be useful. I'm a Novice Senior. Will be
How do you know if you have Windows 32 or 64-bit
Start > right click on computer
Select Properties
Under system, you will see listed Windows 32-bit or 64-bit
32-bit applications can run on 64-bit systems, but not vice versa
When you run older applications, you should consider the installation of XP Mode with Virtual PC for Windows 7 (free)
http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
It's as easy as 1-2-3
Update of Brother MFC-9700 downloads - I suggest that you always go here looking for drivers. You want to maybe create a folder and make the backup copies of the software.
-
I have problems printing with my Brother MFC 7840W. The printer has been installed and uninstalled several times and drivers have. I always have unexplained mixed fonts & print sizes that appear in printed documents. It doesn't matter whether they are word documents or another program. It is not the document! This has been verified repeatedly. Computer experts maintain that it is a matter of Vista. Help!
All-in-one printer, Brother MFC-7840W
Hello
- If it works well before?
- If so, what were the changes made before the issue started?
You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.
Create a user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountNow search for the question.
Follow the link provided below to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile -
try adding a wired printer Brother MFC-255CW on a Windows Vista-based computer
try adding a wired printer Brother MFC-255CW on a Windows Vista-based computer
Hi jande1,
Please see the following link for the Brother's Web site:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Cannot install scanner driver to scan Brother MFC J430W.
Hi all
I have a problem installing the driver for the scanner to MFC J430W. It happens on my Windows 7 PC.
For XP, Vista and Win 8, I managed to install the driver to scan successfully.
In the process of installation, I got the following errors
"ISO52 - Installnetworkscanner - 1 ' followed
'Set BrLogRegistry-3.
Under Scanner and camera, the scanner is empty (No. Scanner inside).
I am able to scan from this particular PC (no upgrade) until the end of last week.
I wonder if there is any security update last week caused maybe this problem?
Hoping to hear from you soon.
Best regards
Roger
Hello Roger,.
Welcome to the Microsoft Community Forum.
I understand that you can not install the scanner. This can be caused by interference with the antivirus third or firewall programs or a problem in the registry of the computer settings.
Let me ask you,
- You did no particular change in the computer?
See the article for more information
When installing the MFL - Pro Suite software, I get an error IS052. What can I do?
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.
Important (register): This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756
Post back with the results, we will be happy to help you further.
Thank you
-
Unable to connect to a printer Brother MFC - 240 c to Windows 7 computer network
The computer of my network which is connected directly to the internet and my router is a computer running Windows Vista (32 bit). My computer is connected through the network to access the internet and the printer connected to the computer base. My computer was also under Vista and networking has worked well.
I installed Windows 7 (64-bit, not by choice, done automatically) on my computer and now I can't connect to the printer on the Vista machine. I can access the internet (even if it is significantly slower than when I had vista) and on basic computer file sharing, but I can not configure the printer. The printer is a Brother MFC - 240 c
If anyone can help it would be greatly appreciated.Thank you
I'm assuming you get an error indicating that the print driver for 64-bit is not installed in the Vista machine. You can either install a 64-bit driver that has the same name as the x 86 driver on the Win7 machine printing and reattempt the connection, install the 64-bit driver that has the same name on the Vista computer (for other 64-bit machines), but it's more difficult.
Alternatively, you can set the machine to check Windows Update for a printer driver that has the same name as the 32-bit print driver. If gpedit.mcs run for the version of Windows you have.
Computer configuration
Administrive models
Printers
Extend the point and print for windows update research connectionIf there is no matching driver name, you cannot make a RPC connection, but you can create an SMB connection. Search for Local Port. There are many posts on this.
Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1 -
can't configure my printer Brother MFC-495CW wireless
I have a Brother MFC-495CW wireless printer was printing fine until 4 months ago lately it won't print anything, I tried to uninstall it & then put it back, but can't set it up. What is the cause of this problem?
Hello
- All changes made to the computer before the show?
- Is there a code error or message displayed when the fials printer to set up?
Try the methods provided and check whether the problem is resolved.Method 1:
Check out the link and run the troubleshooter.Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterMethod 2:
You may also refer to this link and follow the steps other than the resolution of the problems mentioned in the article.Why can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-printMethod 3:
See the link, download the fixit and run. Check if the problem persists.Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/Method 4:Follow the steps and check out them.- Click on start
- Go to the control panel
- Choose printers
- Right-click on your printer and make sure that there is no check box option 'use printer offline '.
-
Printer Brother MFC 210 unable to clean.
Message on the screen-impossible to clean.
Hello
Check with the support of brother, their documentation online and drivers. OEM brother is responsible
for the proper functioning of the printer and their drivers provided.Brother - MFC-210
http://www.brother-USA.com/SiteSearch.aspx?SK=MFC%20210Brother - MFC-210 Support
http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/colormfc/mfc210c_all.html?reg=us&c=us&lang=en&prod=mfc210c_allBrother - Download graphics driver
http://www.brother-USA.com/LP/windows7compatibility.aspxIf this does not help, then you should contact the Support of brother.
Brother - Support
http://www.brother-USA.com/support/=============================================
These can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Printer Brother MFC-495CW will not work under Windows 7 64-bit
I have installed the Brother MFC-495CW printer on my laptop and the printer does not print. It shows the printer either 'ready' but 'offline' on the screeen status monitor. I tried to reset the print spooler and reinstalled the printer software several times. What should I do to get this printer to work.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Impossible to install printer Brother MFC 7420/7820 = in Windows 7
I tray to install a brother MFC 7420/7820 for windows vista = printer on my new computer with windows 7 installed sistem, but nothing happens. Are the system close to compatibility and I need the driver for windows 7?
* title - why my count (windows system 7) do not charge you Brother MFC 7420/7820 system windows vista =? *
Download Windows 7 drivers here:
-
Install our Printer Brother MFC - 885CW printer USB
We tried to install our printer model Brother # MFC - 885CW USB printer on our machine for much of the day, but we have not had any luck. If you have any suggestions, please let us know! Sincerely, your friends at Iowa City, Iowa - Connie and Bob Richards.
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
other home computers can find and print on the Brother MFC-J6910DW, but my Toshiba laptop cannot find or print. How can I fix? Not too much computer.
Hello
Thanks for posting your query in the Microsoft community!
I understand that you can not print on a network share. I will try to help you with this question.
(1) did you make any changes before the show?
(2) you receive an error message/code?
(3) what is a wired or a wireless printer?I can't print from my computer over the network. (For Windows®)Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
We can't wait to hear back on your part.
Maybe you are looking for
-
In the Edition of Photos view, mouse slides without discernment
When you try to edit a photo often the mouse glides to the next or previous photo. When you click on the photo to return to the display of the album, the mouse that often takes as a gesture of shot and moves to the next or previous photo. I disabled
-
Update0000057 (KB97784) fails to install, error code57E
Important update update fails repeatedly. If anyone can help?
-
I would like to print a directory of files in a folder. How to do this in Windows XP Home Edition. Thank you. Roman_XB
-
WINDOWS VISTA BUSINESS AND PRINTING PROBLEMS WITH MY HP 840C DESKJET PRINTER.
RECENT APPEARANCE, PRINTER GOES THROUGH ALL THE MOTIONS TO PRINT, BUT A CLEAR SHEET COMES THROUGH. I HVE CHECKED CONECTIONS HARDWARE, OK; CHEC'D SOFTWARE COMPATIBILITY, OK; SMC WOULD HAVE WINDOWS VISTA ONLINE HELP SITES AND SUGGESTED AUDIT SOFTWARE
-
Symbol of "New Message" smart blackBerry Bold 9900 phones
I have a new message symbol in the space just below the time, but no message in the mail boxes. Any help?