CC 2015 audio crackles and seeds of Mercury GPU

Similar Questions

• Workstation 8.0.6 and Win10x64: audio crackles - timing problem?

  I use WS 8.0.6 under Win7x64 on Clevo laptop P170EM (3610QM CPU, 16 GB of RAM).

  XP, Vista (32/64), Win7 (32/64), Win8x64, Win8.1x64 invited works extremely well, no problem at all.

  In all the Win10x64 invited (from 10586 last pre-release), the audio is very choppy, with or without VMware Tools installed.

  Tested with the internal ' Test' button and popular players (WinAMP, Foobar2000) using MS, SD and WASAPI interface. Even with 2000 ms buffering, there is no clear sound. In all previous versions of Windows (up to 8.1), 200-300 ms of buffering is enough.

  DPCLat shows 1200.15000 we 1100.1200 average latency.

  I'm afraid that there are some problems of timing of comments.

  What timing technique had been changed to relatively Win10 to Win8.1?

  WS 8.0.6 can be adjusted to fix, or should I update my WS to a version more recent?

  Would be - for upgrade, choose which version of WS? Here, I've seen a few complaints for WS 10 and 12 WS audio stability-related.

  I discovered that Virtual 8 HPET Hardware is enabled by default:

  hpet0. Present = 'TRUE '.

  Disabling HPET eliminates audio crackles and timing problems in win 8.x and 10:

  hpet0. Present = false

  (or you can just comment this line on ' # ').

  Most likely, Workstation 8 virtualizes not correctly HPET.

• Crackling Audio Sigmatel and Broadcom Wireless

  I have a Dell Inspiron e1505 laptop with 2 gig ram and 1.6 GB Intel T2050 processor and a new installation of Vista. I find during playback of music played or from the hard drive is there an intermittent Crackle in the audio when my wireless is enabled.

  I have the latest ATI driver for the video, Broadcom wireless driver and driver Sigmatel HD Auio from Dell. I tried to uninstall everything audio and then having Windows find a compatible driver. The audio is always crackling in Vista. I reinstalled everything again with the same result.
   
  I bought a Creative X - FI USB sound card but this cracked too well on the USB bus.

  So I am at a loss to explain this, since the same material worked flawlessly under WinXP Sp3.

  Can you help me? Thank you.

  I found a solution to my problem which cost me thirty dollars. I bought a program called DriverCure Pareto Logic which is a DELL Wireless n pilot recently that fixed audio crackling for good. If anyone has this problem so this is a way to solve the problem of cracking.

• Audio problems and mask when reading not on no FULL quality

  Win 10
  I7 6core
  GTX980 4GB - had the same problem with the previous cards + latest drivers are used and have had the problem with older drivers.
  32 GB of Ram
  Body CC2015

  Working with and reading Dragon RED 6 K images on the timeline, the audio track falls inside and out. The meters also stop working when audio is de-energized. It matters little if the audio is the zero song recorded on the RED or if it is external audio synchronized to the top. The issue seems to only happen when the playback quality is not set to FULL quality, what quality is set to FULL rear audio playback perfectly reading Dragon 6 K sequences in real time is a bit beyond my machine if it isn't really a viable option. The question goes as far if I disable the layer with RED film and just play the audio layers so the audio recorded appears to be very well.

  According to the other forum posts, I tried compliant audio to a drive other than the one with the RED film. I also tried to move the audio to another drive as some have suggested that the issue was on the HARD drive that contains the images RED 100% reading. None of these options worked. I can never remember running into this issue Edition and playback of images of RED EPIC 5 K. And did I not the audio problem when working with lower resolution files.

  I also met other issues in trying to work with the Organization of reading other than that of the TOTAL quality. The use of masks on effects GPU accelerated often causes the whole layer to move off the coast of the viewer project or black glitter during playback. When stopped everything of fine. A quick fix is reading quality INTEGRAL, but once again this is not always possible according to the number of applied Visual effects. Also the engine of reading mercury to the software not 'fixed' the issue of the mask, but it's not really useful in practice. Have had the problem of masking for a long time and initially, I thought that it was related with colorista III, so I grew up with the red giant. They were able to reproduce the issue and noticed that it happened with the other native Ppro GPU accelerated effects, meaning that it was a body does not issue a colorista problem. Support red giant apparently passed on the issue to the agency team, but that was back when colorista 3 is out and still no solution.  

  
  Let me know if you need more information.

  See you soon,.
  James

  Update: CC 2015.2

  Masking question can be solved when you right click on the viewer of the program and then click left high quality playback.

  Still no update on the audio issues however.

  Update 2: CC 2015.2

  Audio is de-energized is more if you delete the audio tracks of RED Dragons. Only play .wav files under the Dragon pictures with audio in sync, I no longer get audio drop-outs. This may apply to other codecs as well.

  First step: good audio sync with the zero track.

  Second step: remove the audio tracks of cameras.

  For me, that stops my audio stall and not to come back.

  Update 3: CC 2015.3

  High quality playback is at the origin of files PNG away from their intended position and also no longer works as it did in 2015.2. Not sure about her work at all TBH.

• Re: Audio crackles on Satellite A500 (PSAR3A - 01 K 002)

  Bought a new Satellite A500 last year and have had many problems, here's a quick run down:

  1 will play not with Win7 64-bit, compatible blue screens pointing to the graphics card driver. Tried every update in the Sun, nothing helps, also tried a full system restore with no luck... finally gave up and moved for Win 7 32 bit and stability seems reasonable.

  2. audio crackles with 64 and 32 bit versions of win 7, once again have tried every update under the Sun, including BIOS and full system restore with no luck. Audio is really shocking and it is worth noting that it is not just the speakers, when I use a headset (and joking around, I had plugged a top of the range $300 pair) it still crackles like nothing else.

  3. fell hardware WIFI switch...! ??? Also note that this laptop was not the biggest of any ill treatment and hase has spent most of it is time sitting on a desk at home and not be mobile (which incidentally is therefore what laptops are designed for should be able to handle)

  4. Webcam not centered, he did on my right shoulder looking into no. mans land making it quite impossible to use and type at the same time.

  Where I am now... Well I took it to Portacom (west Perth) under warranty that I do not advise anyone to do as disassembled for replacement of the webcam, they were pretty useless, and they were pretty rude about it too.

  They said they tested the audio with intensively music with headphones too and can't find anything wrong with that, but yet it still crackles away murdering all my favorite music.

  They said that the WIFI hardware switch was caused by abuse, but there is no sign of violence.

  They do not have check the blue screen with windows 64-bit issue because I had long since given up that at this time.

  I was always a fan of Toshi and that's why I insisted we do a when I upgraded, but it seems he build quality has suffered a little since I finally bought a. I don't think I'll go to another ever again, this machine is wound very badly and has a huge impression cheap on this subject. Even more if you need any technical support, warranty or not, don't bother with Portacom. As I said they are rude and not much help at all really.

  Hey, man

  You are right, the A500 series have problems and the most annoying is audio crackles. I bought my round 4 monts ago and hoped that Toshiba should fix bugs of cracking, but it is still exists. I tried all Bios upgrade, reinstalling the driver, registry settings, but still no solution. As I see it, Toshiba is not care we or am I wrong? They have placed the same driver display simply by changing date you output. As for me, I don't often listen to music on my knees, using a portable mp3 player which fortunately not crackling.
  But anyway, I love this model. He has a good design, assemblage of powerful and high quality. I hope they fix some bugs in the future

  LEADING INNOVATION MUST BE FREE FROM CRACKLING

  Welcome them

• NB200 audio crackles

  Months of series 21 Netbook NB200 PLL28A old has not had much use. In the last 3 months it has problems with audio and video. Windows 7 starter. Upgrade memory to 2 GB.

  Audio crackles, I can hear the fan in external speakers and headphones.
  Skype says that the signal is too low.

  With Skype call testing service during playback audio fades in and out, moderately.
  Sometimes, there's a hum. And Yes, I changed the power settings to turn off on battery only.

  TV dongle in the past that a registered/listened to the hassle 3 months ago. Now, the image is so pixelated registration is useless. The record also seems to "hang" for long periods and then resume with more pixelation and beige/gray color overall...

  I went looking to see if I could change the BIOS to 'share' more memory with the graphics chip, but there is no option. (sigh!)

  Someone at - it clues, please?

  Szaan

  > Audio crackles, I can hear the fan in external speakers and headphones.
  > Skype says that the signal is too weak

  Have you noticed this reading of an audio CD or play music from mp3 too?
  If this isn't the case, then the sound issue of Skype could be linked to slow down the internet connection.

  > TV dongle in the past that a registered/listened to the hassle 3 months ago. Now, the image is so pixelated registration is useless. The record also seems to "hang" for long periods and then resume with more pixelation and beige/gray color overall...

  This only happens using the TV dongle?
  How about watching videos from YouTube or DVD?

  > I went looking to see if I could change the BIOS to 'share' more memory with the graphics chip, but there is no option. (sigh!)

  This option is not available in the BIOS of the laptop. The graphics driver controls the graphics memory. Until it must be said that I don't know if this is related to your hardware problem or software of Mr. your system maybe simply confused upward? How about HARD drive recovery? It would be maybe good option to set the operating system configuration, and then test the functionality.

• Satellite A500-17 x Audio crackles

  Always audio crackling noises, even after following the instructions in the other thread on this forum. (using laptopvideo2go drivers etc...) Although not as well as before, only sometimes when switching Windows or when the computer is made of several things.

  Someone at - there still any issues with this? Also I don't know why they closed/locked the other post cos they seemed to have solved this problem. But obviously, this has not been resolved 100%, please delete this thread if you wish and reopen the other thread for comments.

  It would also be useful if * Forbo * could publish a list of what you updated, as NVIDIA HD Audio realtek driver and video driver and you are using 24-bit or 16-bit settings. or did you just update the video driver.

  Thank you!

  I put t know why this didn't solve the problem in your case, but it seems that the update of the graphics for graphics cards from nVidia Driver is the solution.
  Maybe the old driver files are still persist on your device and so this didn't help you solve this problem

• sound crackling and full stop

  my sound started crackling and then the sounds stop at once when trying to view a video stream or play games

  Hello

  ·         Did you make any changes before the show?

  ·         It happens during playback of video/audio files online or with all files?

  ·         What operating system is installed on your computer?

  I suggest you follow the steps in the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Why my speakers are crackling and distort the sound?

  Why my speakers are crackling and distort the sound?

  Hello

  You have a few options as I see it.

  Click Start in the search type Recovery Manager, and then click it once select Yes on user access control, and then select I need immediate help and then select driver & select recovery requires the audio driver and install it and then restart the device.

  Go into Device Manager and uninstall the sound driver and restart and unit automatically installs the driver.

  Try to run the system restore to the date where the unit was working fine.

  Try to update the driver from hp.com for Audio & Bios site.

  Last step is to perform a recovery on the unit before they please back up your data.

  If your laptop is still under warranty, contact HP and make arrangements for the speaker replaced.

• Crackling and static

  I just upgraded my iMac with OS X El Capitan. Now when I change my podcast, recorded in multi tracks, I hear crackling and static. When I export the file to a drive MP3 the problem isn't here. Any suggestions?

  Also, now when I switch back between wavelength and multitrack forms, it takes seconds to change (he used to make the quick switch) and the rotation color wheel appears during the shift.

  The attached note warning appears in a media window and hides. I wonder if it's related.

  You are using an external audio interface or map of its Apple built in?

  In any case, El Capitan, from all reports, was a disaster in terms of audio performance.  If you do not have the latest version of El Capitan, download the upgrade... It fixes some of the audo related issues.  (But, alas, not all.)  It is not just an audition... many DAW and audio hardware companies have issued warnings not to go yet.  Indeed, the last bug fix worked on hearing for most users.

  You can try to increase the latency/Buffer setting in Edition/Preferences/Audio Hardware.  There's a chance that might help.

  In addition, you may need to wait for the next difficulty of Apple bug... or downgrade to the previous version of the operating system.

• How can I play audio books and music to the same list of reading, in the same app on my iPhone?

  I don't really know where posting this because it applies to music and audiobooks and iTunes, but this corner of the support community seems most likely to be read by people with similar problems.

  I've got playlists in iTunes that are a mixture of Media type = Audiobook and Media type = music. In iTunes, they are in the same playlist, and I want to stay in the same playlist - they are language courses. But on my iPhone, digital audio books disappear from music and appear in iBooks (and in a book audio browser, the app I use audio books). It's the same playlist is now not only in two different playlists, but in totally different applications.

  Is there a way to play these files from the same application on my iPhone, rather than having spread them over two applications? I guess the most likely option is an application that includes all the audio files on the iPhone, not only music and audio books not only. Such an application exist?

  (Yes, I could theoretically change all in the music, or any audio book, but many of them have four-digit numbers, and if I change those files the track numbers will disappear and the playlists will be totally screwed.)

  Thanks in advance.

  Want very it is a third party application that can play audio books and music - particularly iTunes purchases items. You can certainly check the app store.

  But yes, the unit and the apps work as expected.

• My MBP with retina display has no top file, but storage information still show a lot of memory being exhausted by audio, photos and movies.

  Recently, my MacBook Pro with retina display has started to run out of memory, so I moved all my downloads and stuff in my external hard drive. After the transfer, I had some good 20 GBs free and my folder all my files to completely empty.

  

  But even now when I go into storage under the about this Mac information, it shows that more 1 GB of audio files, about 800 MB of photos and 500 MB of movies.

  

  Using the search option (and put a black space in the search bar), I discovered a few files in the Mac section, but they were barely a few MBs in size, and no audio or images or movies were present there.

  Where are all these "hidden audio, photographs and films that take about 3 GB of space from my hard drive? I am naïve.

  Here is my overview of the system:

  ********************

  Any help will be much appreciated.

  Thank you!

  < image edited by host to remove the serial number >

  This view will be incorrect until the Spotlight indexing your drive. In addition, it is only an effort to classify the files types are known by their file extension. Thousands of files on the computer, however, will only be classified as 'Other' because they did not have a type that falls into one of five or six available categories. If you want an accurate display of disk space then: press command-I to open the window read the information. In the top panel is a visualization of the status of your drive: capacity, used and available. It's everything you need to know. If you want information on the types of files and their location, and then use a tool such as OmniDiskSweeper or GrandPerspective.

• Audio files and movies in my iMac, how to find them?

  It seems that my iMac HD have Audio files and movies.

  I do not remember that I downloaded from these files.

  How can I find / manage them please?

  Maybe my iOS devices?  (synchronization via iTunes)?

  Thank you.

  

  Disk utility class files by type. They can be found anywhere, as in e-mail messages and attachments, Photos, downloads, your library, iTunes etc. Look in these places. If you are unsure where to start there are some utilities that you can use as WhatSize. It is available in the App Store. This is just one example; There are other similar products.

• a section of a Copy imported audio track and stick to the new track

  I need to copy part of an imported audio file and create a new track of just what I want.

  It seems to try to record audio track 1 on audio track 2 does not work.

  3DS3 wrote:

  I need to copy part of an imported audio file and create a new track of just what I want.

  Click on the region imported to make sure that this option is selected

  Drag the slider to the beginning of the section you want and press command + t

  Drag the playhead to the end of the section you want and press command + t

• Audio examples and vibration - activate or not?

  Hello

  I am a student and I use the evaluation version of LV I am playing with audio examples and vibrations, but I don't see the block diagram only the façade. It says to activate LV. Need to activate the OAS tool to see examples block diagram or is there a trial version?

  Hey Charlie,

  Please see the following knowledge base:

  http://digital.NI.com/public.nsf/allkb/862567530005F09C8625675F00711756?OpenDocument

  If you are using the evaluation version of LabVIEW, 'you will not have access to diagrams of screw not available in the basic development systΦme."

  Your options are:

  1. buy the sound and Vibration Toolkit (and LabVIEW so),

  2 buy the version of LabVIEW Student install of the Student Edition (only this version includes noise and vibration measurements): http://www.ni.com/labviewse/compare/

  You can check with your University/College to see if they bought the box tool.

  Hope it will be useful,

  Norbert