CC only opens when the laptop not linked to internet

Similar Questions

• Digital inputs only noisy when the laptop is plugged

  I had problems with loops of Earth and power supplies for laptop in the past.  But it is the first time I got it so wrong that it makes the digital inputs which are both related to the ground and the debounced software cannot be used.

  It is NOT material OR.  It's a DT9816 of data translation, a USB DAQ Multifunction with small budget.   The laptop with the problem is a refurbished Dell, with a very obvious not Dell PSU who throws to the top of the warning in the BIOS and scales back from the processor.  (Danger Will Robinson!)

  The problem with the digital entries shows only upward on the Dell when it is plugged into a power outlet.  On all other machines and with the printer unplugged Dell, digital inputs floating.  But those that I have attached to the Earth is rock solid and work very well.

  What surprises me is more than the noise is so bad that even tied to the ground with a half second debounce, I get always false triggers.  I have not brought to power, but considering that it sounds really loud, I suspect that it looks pretty bad.

  I think I'll try a powered USB hub.  If this does not work, then I think that the customer will have to replace the power supply on the laptop.

  However, I was surprised.  I used a lot of USB DAQ hardware, and it's the first time I've never seen a problem like this.  The NI USB 6002 I tested on this same laptop does not seem to show the same problems.  Even if it is true that this is a different software and the test was brief.

  I'm curious to know if other developers have found something similar in the past.

  I can confirm that using a USB hub external powered eliminated the problem of noise in the original post.

  Interesting things.  I had not seen this before.  Now, I wish I had again the NI DAQ USB I had here last week so I could test that.

  Looks like I'll use a hub powered on this project.  But I think I will recommend always replace this power.  Although a lot of noise coming from the power supply, probably isn't good for nothing plugged it... or even sitting near him.

• File Explorer opens when the laptop is load / plugged

  Just bought a Lenovo G50 yesterday and now when I reboot it while charging, it opens "This PC" to start Windows.

  I searched and searched - that doesn't happen when I'm doing a secure boot and happens when I do a clean boot and disable all.

  If I unplug the charger and restart the PC it didn't - but once I plug in the charger, it automatically opens this PC upwards.

  I appreciate any help offered!

  Hi Chris,

  Please contact Microsoft Community.

  This question could be produced if any third-party application problem.

  • You have installed any third-party for purposes of consumption of battery application?

  I suggest you follow the methods and check them off below if it helps:

  Method 1: If yes I suggest you uninstall the third-party application follow the link below.

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Method 2: I propose to run the diagnostic tool and check if that helps:

  http://support.Lenovo.com/us/en/lenovodiagnosticsolutions/tools

  Method 3: The resolution of the problems of power can automatically detect and fix incorrect power settings. See the following steps to run this utility for troubleshooting:

  1. Press the Windows key + F to bring up the search bar of charms.
  2. Select settings from the drop-down list below search and type troubleshooting.
  3. Click on troubleshooting and select the view all option in the left pane.
  4. Click on solving the problems of power and follow the prompts.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  This happens even with pictures taken on another device, not just mine.  My daughter told me that the phone fell recently.  The yellow streak isn't nowhere elsewhere on the laptop, right on the photos in LR.

  It happens when you import new images. This pourrait indicate that the sector where the pictures are copied to is damaged. But it could be a faulty card reader or a bad cable if you connect the camera directly to the computer. It's a hardware problem. Your challenge is to figure out where this problem.

• Why should keep the lid of the laptop closed when the laptop is not in use?

  Why should keep the lid of the laptop closed when the laptop is not in use?

  For energy conservation, to avoid dust and spills and damage the display.

• The problem that I have for a week, it is that my screen is fine when the laptop is plugged in but fades when it is not plugged in.

  I have a Samsung NC10 that I bought in 2008 and the problem I've had for a week, it is that my screen is fine when the laptop is plugged in but fades when not plugged in - it ' s like going to a brightly lit room, in a room where the lights are dimmed... What can I do to remedy this? My battery runs down? Can I us my laptop plugged it my battery die? I must admit that I left basically still my laptop plugged...

  Check the settings of the display under battery power and adjust accordingly - How to adjust the brightness of the screen under Windows XP.

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database of your application]

  I have Adobe photoshop Elements 4 and use windows 10. When you try to import photos and do other things in Adobe I the following error coming. {Microsoft} [ODBC Access driver} cannot open database' the may not be a database that your application recognizes, or the file may be corrupt,.] Everything worked very well this fault has just come. Anyone know how to solve this problem.

  Settle into the Photoshop Elements forum.

• Satellite Pro L650 - 1 L 4: battery will be discharged when the laptop is disconnected

  Hello together,

  I have a problem with my 5 month old laptop Satellite Pro L650 1 L 4.

  When the laptop is unplugged it will pay the battery. About 44% within 24 hours.

  Of course, options like BIOS "Wake we Lan ' and something like which are completely disabled.
  And of course the laptop is turned off completely and not the Sleep Mode.

  Any ideas?

  Kind regards

  Stephan

  Hello

  Please check if the wake-up on LAN is also disabled in the properties of LAN card (Device Manager-> LAN card-> properties-> Advanced tab).
  I also recommend checking the WLan card as well.
  Please also check if attached USB devices don't lose the power of the battery.

  But also a malfunction of the accumulator may be possible... so it has to be checked also...

• Want x 360 15-u111dx: Touchpad turns off when the laptop is on the side

  Hello

  I'm the kind of person who tends to use my laptop on the side while lying on my side. Have a 2-in-1 laptop makes things difficult when I stay in portable mode, but I put the laptop on the side. He starts from the principle I want to use it as a Tablet while it is still in laptop mode. The screen starts automatic rotation and the touchpad deactivates accordingly.

  Fortunately, I know how to disable the auto-rotation when this happens, but I don't know how to re-enable the touchpad when the laptop is on the side. Help!

  Hi there @lisanvo,

  I looked into the different ways that you can use your laptop to see if the function to the HP ENVY x 360 on its side in laptop Mode was possible. I found a paper called HP ENVY x 360 Convertible PC - Maintenance and Service of Guide.

  If you look under external component identification on page 7, , you will see that it gives you three modes that allows this particular model.

  I also found that the tilt sensors and the dock will not to allow you to use that phone in particular in the service that you want to because it's a model that allows you to have capabilities of the tablet.

  I want to thank you for visiting the Forums from HP Support.

  Have a great day!

• Hi, I paid the subscription to muse, received confirmation 7 hours ago, but the subscription is only showing on the site not on the creaitve cloud. I need urgent help for a period

  Hi, I paid the subscription to muse, received confirmation 7 hours ago, but the subscription is only showing on the site not on the creaitve cloud. I need urgent help for a period

  Hi Se80799442,

  Adobe trial and purchased applications are same, if you are showing that the trial has expired it would be a mistake to solve this, you can check the link below:

  ( Make sure you use the same Adobe ID / Email ID that you used to purchase the subscription )

  Download the creative application of cloud from here: Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Connect and disconnect activate Cloud Creative applications

  If it does not help him follow the link below

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it then just turn off the firewall for awhile disconnect you and you connect on the creative application of cloud and check.

  Let us know if that helps.

• can you use a deskjet 970cse in black only mode when the color cartridge dries up

  can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry

  banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps.

• The screen goes black when the laptop is disconnected

  The LCD on my DV6 becomes black when the laptop is disconnected the power supply cord.

  Help, please!

  Hi, have you checked the brightness on the energy savings?

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• E535 high battery drain when the laptop is turned off

  Hello

  I just bought a Thinkpad e535 and I have a very annoying problem:

  Whenever I have turn off the laptop (not not hibernating, not to sleep) and unplug the power cable from the power outlet the battery loses about 20% of charge every 24 hours.

  What I have done to solve the problems:

  -Always on disabled USB in the BIOS

  -Disabled Wake On Lan in Windows AND BIOS

  -Run the powercfg /devicequery wake_armed command to see if any device is programmed to turn on the laptop

  BIOS version is a later (2.08)

  Software Power Manager is 6.32

  Any help will be greatly appreciated