CD - dvd 0xC0AA020F drive error

Similar Questions

• Dimension C521 CDRW/DVD combo drive error

  Device rom TSST corp CDRWDVD TS-H493A SCSI CD Windows can not load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I'd appreciate any help in what direction to go with that.  I searched around, but my computer knowledge is very basic.  He won't even try to play a disc at all.

  
  

• Re: Satellite C660 - code 19 CD/DVD drive error

  My Satellite C660 CD/DVD ROM drive does not read the CD. When checking my device manager, there is an identified problem:
  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  How can I go about repairing this anomaly?

  Hey,.

  It is a known issue and there are already several discussions here in the forum about error code 19 Device Manager. Toshiba has published an FAQ about this article:
  http://APS2.toshiba-tro.de/KB0/FAQ82023A0000R01.htm

  To get rid of this, you must remove the server - and lowerfilters in the Windows registry:

  1.demarrez > run > Regedit
  2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  4.reboot.

• Satellite 1400: I get IDE-error after upgrade to the slimeline DVD - RW drive

  I have the laptop with a DVD-ROM above it. (Second hand and no manual)
  I have a DVD - RW Drive (SOSW - 852S) I would use.

  I can adapt without any problems.

  It freezes on the spot but for about 2 minutes and then it says IDE-error then it it boot XP.

  When I go into my computer there is no DVD player.
  Have I missed something when I put the disc?
  I can't? t get the BIOS to check it out.

  I tried most of the buttons for example F2.

  Hi David

  It s a clear case for all those who have a little experience with mobile technology.
  You must know that not every drive slimeline is compatible and supported with the device.
  The Player supports uneditable master / slave or c - salt settings.

  In your case, the laptop freezes 2 minutes because the BIOS trying to find STRANGE.
  This is not possible because of wrong settings and pops up the error IDE.

• Satellite 2450-201: update driver DVD - IDE #1 error

  Hello

  I need help to upgrade the dvd for my laptop model Satellite 2450-201 with internal dvd writer.

  I have LG and I got this message at startup: error IDE #1. Any suspicion that I speak with Dep. error tech and he said that the problem of compatible driver. I think that good performance with the system.

  If I update the bios from 1.3 to 1.5 it will solve this problem?
  Or do I need another brand name model to replace the old DVD with DVD - RW?

  Hello

  As someone from the tech, adj. suggested that this error message appears because the car is not compatible.
  The disc has a bad master/slave setting and so the BIOS can not recognize the drive.
  To resolve this problem, you must upgrade the laptop with compatible player.

  I found a compatible Toshiba PA3255U-1DV1 DVD-RAM drive. But this isn't a burner.
  I suggest to contact Toshiba service partner in your country to control the compatible player and supported. So you can be sure that you will get a good player.

• CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot eject cd studio 1555: error: an error has occurred by ejecting ' DVD RW drive (D :)

  Im making a back up and I can't not to eject cd No 2 using the computer and then ejected.   my keyboard eject button does not work either.   It says "Microsoft Windows reports: an error occurred by ejecting"Player DVD RW Drive (d)"someone knows how to eject manually?

  There is a PIN on the front of the drive hole, use a paperclip, pushed inside enough to jump the gate, you can then pull it fully open.

• DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

  My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

  19 code means there is a driver conflict such as two devices attempt to use the same
  resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error ""A required CD/DVD device driver is missing. " If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now.

  OriginalTitle:lack drivers

  I change my ubuntu to Windows 7, but "A required CD/DVD device driver is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now. Note. If the windows installation media is in the drive, you can remove it for this step. "what I can do about it?

  Hello

  Are you able to boot to the Windows Vista operating system?

  Read the following article and see if that helps:

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk:

  http://support.Microsoft.com/kb/952951

• How can you correct - an error occurred in ejecting ' DVD RW drive (e) "."

  I was wondering what is happening. Works perfectly an hour ago now, it does not respond when I press the button to eject the trey. When I try right click then eject it comes with, an error occurred while ejecting ' DVD RW drive (e) "." What is happening to her?

  Hi Scorpion1138,

  Please use the forum.

  Quick question, have you tried to reboot your PC and eject the DVD until windows loads? It might just not be well wedged into the slot.

  Give that a try and let us know if it worked for you.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD RW drive properties window: what "use error correction" average / under Rip options when digital is selected?

  I noticed that an option in the Properties window of my Player DVD RW - under "Rip", when "Digital" is selected, there is the possibility to check a box "use error correction. I'm a DJ some of my older CD digital - ripping so I wonder if this option would be a good/bad idea? In terms to ensure the best audio Ripper without glitches or jump?

  Hi Alexander,.

  Activate the drive error correction means Windows Media can read CDs that contain errors if the option enable error correction is turned on. Error correction looking for points on the CD where it is unable to read and will attempt to read them again. It will not lead to inaccurate burns. This means that for the best PMR, it "use error correction" option must be selected.

  Let us know if you have other questions about Windows in the future.

• DVD/RW drive has a corrupt... driver error 39

  DVD/RW drive has a corrupt... driver error 39

  How to replace this driver
  Device Manager indicates that the driver is the best available
  The device is Optiarc DVD +-RW AD - 5560 a ATA

  Hello

  Please see the troubleshooting steps in this link...

  http://support.Microsoft.com/kb/314060

  .. do not run the fixit which is only for XP and Vista. Please report back with the results of your troubleshooting operations.

  Tricky

• Driver MATSHITA DVD-RAM UJ8E1 error

  I have a brand new Acer Aspire 571 Windows V3 8 & the first time I tried to use the DVD player, to rip a CD, nothing happens. I checked the devices & printers in the control panel and the device 'Aspire' shows a yellow triangular exclamation point (need to troubleshooting and status driver error). I troubleshoot the device & advises I reinstall when I apply this fix all I get is found problem MATSHITA DVD-RAM UJ8E1 has a driver problem. Not fixed.

  I have had only the laptop for a few days & have spent a lot of time to transfer & sorting my library top via an external drive, so I am reluctant to take it back to the retailer. I had much rather fix the drive but need help!
  Thank you in advance, a forum user first.
   
  [Moved from comments]

  Hi Delphine,.

  Try to remove the entry from Pfc that relates to the pfc.sys.

  To remove Pfc input double click LowerFilters and under value data, remove Pfc > OK

  Create a system restore point beforehand and restart the computer after.

• Error message from device IO on the DVD ram drive

  Help someone!
  I have a Satellite S203 and recently the em * a DVD ram drive stopped recognize any kind of CD/DVD, etc.. It must much worse & worse over time with her works do not at all. I tried to change the configuration of the IDE to PIO but always without success. Help, please...

  Jelibabi

  Hello

  Sorry, but I don t know what laptop you have (xxx-S203) but I can tell you that DMA if available is standard setting for all Toshiba laptops. On this path, it is not easy to give you a correct answer, but if the reader can't read original CD or DVD I guess there is hardware malfunction and the drive needs to be replaced.

  Good bye