CD DVD does not read by the reader of cd/dvd from my PC
guys, my PC does not read DVD discs for a while now... tried troubleshooting several times but I keep getting a message that "the DVD/CD drive works properly".. .He video plays audio CDs and CD fine, it's just the DVD; It stops after spinning for like 2 seconds... that's Samsung R580... would appreciate any help I can get a pls.
Among the failures most common is the DVD/CD drive.
If yours is a laptop, the problem is the availability and price. It is an article of OEM available only from your PC manufacturer. Cost is probably about $100, but generally quite easy to install.
If yours is a desktop computer, the problem is easy to solve and low cost. About $20. Remove all power, press and hold the power switch IT for at least 7 seconds. Set on the side with the threads on the bottom. Take off the side. You may need to remove the front as well. The DVD player is held in place usually by 2 screws easily accessible. You must remove the 2 cables from the back. Remove the old one. Drag another in its place. Fix the two wires, they only fit one way. Equip the 2 screws. Replace the side and front on.
There is a simple alternative. It is a portable DVD player that connects to the computer via a USB cable. Some receive their power of this cable. He turns around $25 and is completely transferable from one computer to the other. Also small and light.
Tags: Windows
Similar Questions
-
Utility profile WLAN does not start after the removal of some tools from Toshiba
Here, I would like to say that Toshiba software (utilities, entering in laptops) is poor, unstable and mostly useless. I think it makes sense to launch a call to management of Toshiba to stop dealing us with the ugly such software.
SHAME ON THEM!For example: in my new Toshiba laptop utility of LAN/WLAN profile (the program is useful only) did not work. It has not removed after uninstalling some of the Toshiba Utilities, their menu program shortcuts forms and I can also see their icons to the left in the notification area settings.
In addition, some of the utilities did not start (like Toshiba disc Creator). Also utility Toshiba are very different, poorly described and localized, do not appear in between them and their shortcuts are entwined in the menu of programs with shortcuts to documentation.
Hey Buddy,
To be honest I don t understand why people post only the negative side of utilities Toshiba pre-installed you also noticed that they make your (computer) life easier?
I don t want to count each tool of Toshiba, but they provide useful functions like CD burning, material is diagnosed, assistant LAN/WLAN connection and so far.
If you don't like it, n no one said that should be used. Uninstall it and be happy with your laptop. :)
Regarding your problem:
I put t know why don t tool work harder because you don't l t post the exact name of it, and that the tools you deleted but say you ConfigFree? The program is useful for WLAN/LAN connections then try to reinstall Toshiba page. -
DVD drive does not appear on the screen of the reader 'computer '.
I lost access to the DVD drive. It does not appear on the screen of the reader 'computer '.
It starts with a disc inserted, but stops after about 20 seconds without opening all files.
The DVD comes on when it starts first and then turns off after a few seconds.
I have re-installed the driver of Toshiba and still no access.I think it all started when I installed a new WD 1 TB external hard drive which its virtual CD drive on the E: drive, which was used by the installation DVD player. I moved the external hard drive G: and drive E: letter has left vacant, but still does not work.
Any ideas how I can fix this problem? It would be greatly appreciated.
Optical disc drive is listed correctly in the Device Manager?
-
Satellite L650 - ODD does not read most of the CD or DVD after BIOS update
While DVD copy, asked me to do an upgrade of the bios for the included software on my laptop, so I thought that coming from toshibsa, it must be safe. I closed all my apps and let the update occur, restarted my pc and tried to continue to copy my dvd.
Now my dvd writer does not read most of my CD or DVD, original as well.
I managed to get hold of my previous Bios version after a battle before the update to see if I can go back to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it.Any help would be greatly appreciated I have two days to copy 100 DVDs for a customer and I can't do it now,
I have a laptop Toshiba Satellite L650 running windows 7 64 bit 8 GB memory with a SSD hard drive
> I can return to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it
I don t think that the BIOS is the problem here, the point is that CD and DVD support details are stored in the firmware of the CD/DVD drive and NOT in the BIOS of the laptop.
So in my opinion the update of the BIOS is not the reason for your problem.I think you should check if cleaning the laser lens allows you to read discs.
Use a fluid wadding tip and alcohol to gently clean the laser lens. -
Satellite P200-140-CD/DVD drive does not read the CD
Hi all
I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
I've updated the drivers, cleaned the lens, completed all the normal tasks.Any advise / solutions out there?
Hello
Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:
(1) run regedit (Start-Run-Regedit online online)
2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
(3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
(4) restart.I hope this works for you too! :)
Good bye
-
The CD/DVD drive does not read discs
Hi, I have a COMPAQ Presario CQ40 with optiarc DVD RW AD - 7561 ATA Device driver, recently the drive does not work properly. It can read and burn the disc, that I already used, but when it's a new (disc white) it does not read the disc. It has an error message "make sure that the disc uses a format windows recognizes. If the drive is not formatted, you must format it before you use it. "the disc is the format that would recognize the system. I tried to uninstall the drivers and reinstalled from the Device Manager, but nothing works, tried too much microsoft fixit, always the same. Hope that there is another work around here... Thank you...
Have you tried using other burning software?
Try this free you see if you receive messages.
-
Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.
CD/DVD players use different lasers to read CD DVD vs. Eventually, your DVD laser has grilled. It might be time to replace your CD/DVD drive.
HTH,
JW
-
My laptop is Pressario V2000. My laptop does not read the dvd, but another laptop reads the same dvd. PL is the solution. Thank you
Try another DVD to verify that your laptop can read at least the other DVD. If he can't play other DVD's then you need to replace the DVD - CD ROM drive supplied with your Pressario.
Another thing you can try is to check fingerprints or scratches on the DVD, some DVD players are more sensitive than others.
J W Stuart: http://www.pagestart.com
-
HP DVD Writer does not read or write DVD, but only the CD
My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.
CD/DVD players use different lasers for reading/writing DVD from the CD. All indications would point to your laser DVD as having failed. You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.
HTH,
JW -
CD player does not read the CD ROM and CD music, DVD works fine
My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine
Hi Anil,
We recommend that you download and run the Microsoft Fix and check if the problem persists.
See your CD drive or DVD drive is missing or is not recognized by Windows or other programsSee also: http://support.microsoft.com/kb/321641
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Control Panel indicates that the COMBI RW16x10/DVD unit. Properties indicate that a new disc has no free space. Does not read CDs or DVDs with the content. All indications from the Panel indicate that "device is working properly", but I can't read anything. Updated and modified drivers and troubleshooting I tried without success.
Troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
Please click on the link below and follow the steps as indicated on the page. This should solve the problem.
http://support.Microsoft.com/kb/321641
MD MOEEN AJAZ KHAN (MCP)
-
MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE
MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.
I DON'T KNOW WHAT IT IS.
I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.
IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.
HELP PLZ
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check the cables
both ends. Remove and replace, do not just tight. For laptops, you can often clean power
and contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer
and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
my dvd - rw cd playback, but does not read the dvd.
I have computer fz190 portable vaio, the interesting thing that, previously, my laptop read DVDs and now does not read, while my device to read the CD.
Hi MAHDI roozzi,.
1 when was the last time it was working fine?
2. what happens when you try to play a DVD?
3. you receive an error message?
4. you have any CD to third parties | DVD burning software installed on the computer?First run the fix it tool available in the link below and check if it works.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsIf the previous step fails and then uninstall any third-party CD | DVD burning software installed on the computer and check.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 - DVD does not read the disk on the computer.
My DVD does not read discs, when I click ion DVD player on my desktop shows insert a disk me error help
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://Club.myce.com/F61/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hello
My iMac does not read DVD. Every time when I put in DVD (free or with content), it runs for a while and that he died. CD works for most very well, but sometimes they go inside and the drive is not recognized. And also sometimes the DVD drive is not recognized in ¨informations on system"in the Apple menu.
Thank you
Matouš PIkous
Did you use a cleaning CD in the optical drive?
Maybe you are looking for
-
LabVIEW and Spider8, school project
Heey everyone. I have a little problem and I hope that one of you could help me with this problem. I try to get the data of a Spider8 with a laptop equipped with LabVIEW, I do this by using a USB cable to series, instead of a parallel cable. I have d
-
NFS MOST WANTED DISPLAY PROBLEM.
Hey... I just installed NFS MOST WANTED on my laptop... It works well, only problem is the display is not good... I mean when I start the game everthing is fine uptill the "choose profile" in the start menu, after that even the CAREER, QUICK PLAY, LA
-
I have problems with the update of Silverlight.
It displays error code 64 c. I've included belowUpdate for Microsoft Silverlight (KB2416427) Download size: 6.0 MB Update type: Important This update of Silverlight improves the performance of startup, accessibility features, reliability, security, i
-
PROBLEM: No installation CD with camera, no driver available?
Problem: My friend gave me a canon powershot s300 (digital camera)-c' was his old man. I took some pictures today and I tried to import them into my windows operating system 7. The device could not even be detected: lack of pilots (?) and I searched
-
Activation of the software window taken by another pop-up window
A pc of windows 7 that is running mainly with 2 software. 1 software mainly works automatically and 2nd software works mainly by the keyboard.1 software 2 calls and a 2nd window pop up with maximum activated window. But after 2 ~ 3 seconds 1 software