CD dvd tray problem

Similar Questions

• Satellite C - DVD tray does not open properly

  My Satellite C DVD tray does not open properly. It opens only after several times.

  Can someone help to solve the problem?

  Thank you very much
  Dalug22

  Please check this thread:
  https://Forum.Toshiba.EU/showthread.php?82344

  The ODD (optical disc) contains a small ejection hole. You can insert an object like a paper clip to open the ODD plateau

• CD/DVD tray is not working properly

  CD/DVD tray sometimes won't open.  When I push the button, tray slides in just a bit and then closes.  Little light also flashes once or twice.  This happens when I use the button on the tower and when I try to open the tray using the mouse control.  Discs seem to work very well when I get the drawer open.  Any ideas?  Thank you for your response the sentence to a man of 62 with little computer experience can understand it.

  Thank you!

  It is most likely a mechanical problem, having nothing to do with Windows itself. The gears are plastic nowadays, controlling them the opening/closing of the drawer can be (probably are!) worn and sometimes jamming because of this. If this is the case, it will worsen. You have 3 options: 1) Baby it, 2) replace the drive, 3) fully replace the computer.

• The CD/DVD tray on my eMachinesT3616 will not open.

  The CD/DVD tray on my eMachines T3616 will not open.  Solution?

  Hello

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• phtosmart C5240 all-in-one will not use the cd/dvd tray to print

  OK, so I use essential 3.5 photo to print directly on printable CD. Whenever I try to print, the printer tells me to close the CD/DVD tray, but when I do that, it starts printing the status bar with plain paper. Any suggestions?

  Also connected to the pc via usb and runing win7

  Nevermind found the problem, I myself do not select the type of media correct sorry.

• DVD tray opens on the Satellite C650

  Hello

  I'm sorry if this question has been posted before, but I can't get my DVD tray to open without having to stick something in the small space. When I try and open it normally, a little light beside the button just flashes orange.

  How to solve this?

  Thank you

  Is a CD or DVD inside when you try to open it?

  Almost every player's EJECT open the optical disc drive. Have you tried to use this option in your favorite player? It works correctly?

• Satellite P300 19 p - CD/DVD burning problem

  Hi, I'm new to the forum and I hope somone will be able to help.

  I have DVD burning problems. When I use software engraving the image is usually copied ok and then the burning process starts, which usually lasts only a few moments, then the machine spits out the disc burnt and wasted.

  I usually use Corel DVD Copy 6, but have you tried TOSHIBA and other programs such as NERO. With the help of Corel VideoStudio, it burns discs with a success rate of 90%, but the problem comes when you try to copy my own created disks.

  I tried different types of discs (that is to say + R and - R), and I also tried burning speeds.

  Anbody else suffers from this problem?

  I have managed to find an error code 06077-26 - 2A 040902, made this average anyhting for anyone?

  TEMPRO alerts appear to have provided updates firmware for a number of other DVD players, but not for my machine? Maybe it's due a? All the drivers are up to date.

  Thanks for listening and the anybodies help is more than welcome.

  See you soon.

  In my opinion, you should not think about buying replacements. If you think that the drive does not properly contact service. If necessary the reader will be replaced free of charge.

• Acer TimelineU M5 - 481 T - 6642 Ultrabook of 14 inches. CD/DVD tray when it starts up and stop noise?

  I recently bought an Acer TimelineU M5 - 481 T-6642 14 inch Ultrabook.  During startup and shutdown, there is the CD/DVD tray noise as if the status bar is trying to open. I did not a CD or a DVD in the tray again.  How can I stop this sound action, annoying in my new ultrabook?  Thank you.

  Mine makes no noise noticeable at startup or another so I would get the extract.

• The door on the DVD tray opens when you press the button. Aspire AX3300

  How the DVD tray are accessible when the door does not open? Anyone know?

  There the media stuck in drive?

  You may need to press the trombone quite difficult in the slot to manually move the mechanism to jump the door from the outside.

  Then once its release a bit, you can hang at the front of the car and pull.

  If there is some media stuck and remove you it... try to press the button to close the player.

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• DVD maker problem in windows 8

  you plan to fix the dvd maker problem in windows 8 or simply that it is?

  CD dvd does not automatically load
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/CD-DVD-does-not-auto-load/db717677-5de9-418e-a5d3-d8044a347521

  Creation of DVD Windows in Windows 8!
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-DVD-Maker-in-Windows-8/699c5cc8-0578-4967-BEAB-9a5b14431d6d

• CD/DVD tray

  How can I open the cd/dvd tray on my new g6 pavilion laptop running windows 7 to insert a disk

  douglas424 wrote

  How can I open the cd/dvd tray on my new g6 pavilion laptop running windows 7 to insert a disk

  Hello

  Just press a little button like on this picture

  

  Kind regards

• DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

  DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

  Thank you once again. I burned the DVD!

  It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

  So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

  Now that I have a successful routine, I'll stick to it.

  Thanks for all your help.

  I'll close this discussion now.

• HP Photosmart D5460 printing problem using the cd/dvd tray

  Just bought a HP Photosmart D5460 solely for printing cd/dvd directly on cd/dvd labels.

  The problem I have prints a label on a Verbatim CD Vinyl.

  It is a normal 80 min CD - r but with an edge of vinyl and a 70mm print Center.

  When put in a fake cd (12mm diameter) cardboard, printing is excellent, exactly as it should.

  But as soon as I put in a CD of vinyl, the label is printed below the disc on the disc tray - holder, approx. 80mm below the mark where it should be.

  It drives me crazy, that everyone has seen this error before?

  Calibration is not help me... Also used almost every label possible software out there (Surething, Acoustica, Nero and Photoshop plain) who all give me the same result.

  Yes, I think that's the problem.

  I cut out a circle of plain white paper, which is the size of a cd and cut out the Center (a little more fat then 70mm of the printable area of the disc). Put on vinyl with tape adhesive tape and now it prints exactly on the label, to make it work.

  The black color of the disc must be the problem.

• Satellite A300 DVD tray will not open and cause high CPU utilization peaks

  Hello

  I have a laptop Toshiba Satellite A300 - 1 MM and I have a problem with the optical drive (Mat * un DVD Ram Uj880as):

  DVD - RAM plateau sometimes refuse to open. The LED lights up briefly, but still nothing. Windows recognize the drive but the plateau of refuses to open. Eject commands the position of work and management of the computer-> disk management will not work. I can open the tray manually but the optical drive will not read any cd/dvd. No error code in return.

  When that happens it cause peaks of high utilization of the processor (from 60 to 100%) in the System Idle Process. Just stop and restart it solve. After that, the laptop also runs fine and the optical drive.

  I replaced Win7 32-bit with a 64-bit version and the problem persist.

  Help, please. Thank you.

  I have the same machine with Win7 32 bit and use several players. Everything works perfectly. On this virtual path, it is not easy to say what may be the problem. The configuration of your laptop is not known to us, and we don t know how you set up your operating system and additional applications are preinstalled.

  Maybe stupid advice now, but you must install recovery image original Vista that you got with the functionality of your laptop and test with the factory settings. If the same problem occurs we can chat about it.