Center solutions hp install error 1402

Similar Questions

• HP slimline s3120n-Windows Media Center - Tuner not installed error

  Media Center does not. Tuner not installed message! Help!

  I have a hp slimline s3120n. I got probably around January. Ive been watching TV on it with a card of A 48, 3 ViXS Pure TV - U. recently, then do not install anything I turned it on and got an error from the center of media saying "Tuner not installed" I tried all the things on the hp support Web site
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01187871&lang=en

  I have also a windows server backup from my computer. I restored my computer to a point where the computer work and it didn't work. I looked everywhere on the internet and you can find a lot of people with the same problems, but not answers

  my card is displayed as working on Device Manager too so it must be a software problem.
  im running windows vista 32 bit
  I have tried reinstalling drivers did not work, tried to remove the map and back does not work

  I have HP slimline is now Windows 7 and Vista. When I upgraded to Windows 7, I did not go off Homegroup. My Vixs tuner worked fine for 2 years. Recently, may 2011, I decided to start the homegroup; What a mistake!

  My Media Center said that I had no TV tuner.
  After much research, I found this solution.
  In windows 7 go to "Administrative Tools" and launch 'Services '.
  Scroll down to "Windows Media Center Receiver Service" and under "connect as" column, make sure that setting is 'Local System' and not 'Network Service '. The "Startup Type" value in the manual. not automatic.
  This fixed my issue.

• KB2584052 fails to install error 1402

  original title: security for Microsoft 2003 update fails Code KB2584052 continually used Micrsoft this problem, said however fixed are always the same problem? (added error code 2nd edition)

  Then I just remove the 2003 edition to correct this problem?

  Hi Rick031,

  I realized that I have you linked to this thread by mistake.  Here is the exact link to the troubleshooting steps to resolve the 1402 error using Office 2003 updates.

  Let us know if that helps.

• Error code: 0 x 57 while trying to install Office updates and error: 1402: Setup cannot Cholakov registry key

  Original title: failure of the updates to download and installation failed request due to registry

  Running XP PROFESSIONAL - two questions...

  • Automatic download of updates of window failed.

  Error code: 0x57A on

  1. Update of security for Microsoft Office Excel 2003 (KB2541025)
  2. Update for Microsoft Office 2003 (KB2539581)

  Error code: 0 x 80070652.

  1. Update of security for Microsoft Office 2003 (KB2509503)
  2. Update of security for Microsoft Office Excel 2003 (KB2541025)
  So I tried looking for a solution and came across a blog that said I should turn off my antivirus and try again.  Did not work.  The blog suggested that MS Office to uninstall and reinstall. So I did.  Uninstalled MS Professional and then tried to re - install...
  • message received Error - 1402

  The installation program cannot Cholakov registry key

  HKEY_LOCAL_MACHINE\SoftWare\Microsoft\CurrentVersion\Run\OptionalComponents\MSFS

  Can someone say if these two things are related or how to fix it.  I was stupid and didn't return to the top.

  Hi jbb59,
   
  -Can install you any other updates without any problems?
  -You receive this mCode error while trying to install Office updates only?
   
  Error 80070652 means that a previous installation is not completed successfully. Restart the computer usually solves this problem.
   
  Try the methods listed in the articles given below to resolve this issue:
   
  How to troubleshoot incidents to update your installation of Office on the Office Update Web site
   
  You receive an error message when you install an Office program or you open an Office program or a document

• Try to install VB2010 Express, can not uninstall VS2010 Beta (Error 1402)

  I tried to install VB2010 Express, which directs me to uninstall VS2010 Beta. I mostly succeeded in this, but I get error 1402, as follows:

  Form "Microsoft Visual Studio 2010 Professional Beta 2 Configuration - updated Page":

  Uninstalling components:
  [completed - check] Microsoft Office for Visual Studio 2010 (x 64) developer tools
  [completed - check] Microsoft Visual Studio 2010 Professional Beta 2
  [pending - double bar]   Tools of Microsoft Visual Studio Macros

  ProgressBar «generate the Install Script...» "[completed - check]

  ProgressBar "Update of Microsoft Visual Studio 2010 Professional Beta 2..."

  MsgBox "Microsoft Visual Studio 2010 Professional Beta 2 Setup":

  Error 1402.Could not open key:
  UNKNOWN\Components\8EEF86DD963C1D111A37000A9CA05BF0\7F3517A2CE83
  8933DB4BA232E717E79E. check that you have sufficient access to that key, or
  Please contact the support staff.

  ProgressBar, «Deleting temporary files...» »

  .
  .
  .

  MsgBox "Microsoft Windows":

  Microsoft Visual Studio 2010 Professional Beta 2
  -ENU has encountered a problem during installation.
  Setup did not complete successfully.

  A problem caused the blocking of the program works correctly.
  Windows will close the program and notify you if a solution is
  available.

  "Close the program" button.

  Form "Microsoft Visual Studio 2010 Professional Beta 2 Page setting - finishing:

  Impossible to uninstall the following component:

  Microsoft Visual Studio 2010
  Professional Beta 2 - ENU

  The installation failed.
  Use the following links to the research of the
  the source of the failure:

  There were errors during the installation.
  Although the components were installed successfully, some
  Installation errors have been detected.

  View the error log [file:///C:/Users/Geoff/AppData/Local/dd_error_vs_procore_100.txt]

  .
  .
  .

  When I regedit and go to the registry error 1402 key, it tells me that I can change the permissions, but when I try to do, I'm denied...

  Please: any help would be greatly appreciated!

  Thank you!

  P. S.

  Note that the registry key that I found (and I'm editing privileges on) is:

  HKEY_LOCAL_MACHINE-1-5-18\Components\8EEF86DD963C1D111A37000A9CA05BF0\7F3517A2CE838933DB4BA232E717E79E

  (it does not begin with 'UNKNOWN\Components\... »)

  P.P.S.

  I use Vista 64-bit, if that makes a difference...

  Thanks again!

  It's the operating system Vista Installation Forum.

  http://msdn.Microsoft.com/en-us/default.aspx

  Try the Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Solution Center will not install

  I installed the F4180 Deskjet on my Windows 2000 computer.  Printer works fine but I wanted to check the ink levels and could ' t find the HP Solution Center software.  No registration under program files.  So I released the CD and tried to install again.  There was never an indication that he was installing the Solution Center or HP photosmart software.  So I clicked on run and entered in D:/Setup/SolutionCenter.  It finds the file solutioncenter.msi and a list of zip files that are identified as central to solution.  I have dbl. solutioncenter.msi-click and I get the message "Setup has encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2732. "So I uninstalled everything and only reinstalled under mode in advance where I am supposed to be able to approve all items being installed.  Well it has finished installing and the last screen said there may be additional screens that appear to guide you through the intstallation of additional software.  No screens never not appeared, and I still haven't installed HP or HP Photosmart software solutions Center.  The CD is damaged?  How can I get this software?

  Thanks for your help.

  The Solution Center will not install on Windows 2000. It is not a bug/problem, but that's just the way it was designed (don't ask me why). If you need to check the ink level, then you have to go to the Toolbox of the printer on the printer properties page.

• OfficeJet 6500 Solution center will not install/help files missing

  Hey community:

  Have tried several times to install Officejet 6500 with the solutioncenter does not.  When I click on the icon to get an error message that the solution center was not installing correctly.  I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.

  All proposals/solutions.  Am disappointed right now with the Hp Printer.  Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.

  In addition, I don't have the help files to set up the printer.  Any help on that would be great.

  There could be two questions

  1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software

  2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.

• Error 1402 refers to a nonexistent key.  Cannot install or uninstall to troubleshoot printer driver.

  I can't install or uninstall Acrobat 9.5.3. I get error 1402, which says I don't have permission to modify a key that does not exist in RegEdit: \UNKNOWN\Components\Lots of the numbers. Same Revo Pro can not uninstall it.

  I'm trying to fix a problem with the conversion of documents from Word. The process crashes because Acrobat can't find printer drivers. The proposed solution is to uninstall and reinstall. I can't do.

  Thanks a lot for your help.

  See this article for instructions on how to solve this problem.  Involves editing the registry and has worked for me with this same problem.

  http://KB.sagesoftwareonline.com/app/answers/detail/A_ID/25599/~/error-message%3A-%22error-1402.could-not-open-key%3A-unknown%5Ccomponents%5C%7Bguid%7d...%22 ://

  I hope it works for you!

• Center solutions Lenovo (app) PCI Express hardware error reports

  The diagnostic Center Solution Lenovo software reports error PCI Express WPE001001-WL7X2I material. The yoga of the Thinkpad X 1 seems to work otherwise. Everyone knows about this problem? Require a repair or replacement?

  Thanks for any advice.

  If the error happens when material test, then you should not worry happens to me on a x 1 carbon 3rd gen idk why but for some strange reason, it gives just by failure on the part of the PCI-e what so ever if you run the test time 2nd or 3rd it should give a green pass icon.

• Solution Center fails to install - Photosmart C4345 Windows XP SP3

  Product HP: Photosmart 4345 all-in-one

  System: Windows XP Home SP3

  Problem: Solution Center fails to install - shortcut icon is present, but each time Center is launched, it tries to install a missing element, the applications disc.  This can be cancelled with 2-3 closures of the window installation and the request for the drive.  Printer and scanner can then be controlled form the screen with the mouse, but Center tries intermittently to install the missing module.  VERY ANNOYING.

  Trying to follow demand drive ease of installation, the message appears:

  Module

  C://Windows/System32/Macromedia/Flash/Flash9B.ocx

  Unable to save.

  HRESULT - 2147720473

  There has been no recent update is causing this problem.  It is at least a year and can be associated with automatic updates for the HP programs - which appear to be very unstable and crash constantly - or MS XP.  Both are on the automatic update.

  Solutions of someone?

  There is an HP update which should fix this.  You can get the update from the link below.  Let me know what happens.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&cc=us&DLC=en&LC=en&OS=228&product=3710120&sw_lang=

• Error 1402 when installing Quickbooks update: could not open key: UNKNOWN\Components...

  I am installing a Quickbooks Pro update, but it will not complete the installation because of the Error 1402. I tried to install these updates with an another user account with Administrator profile the same error occurred.  I am running Vista Home Premium.

  The suggestion that QuickBooks gives is to change the registry, however, this attention that any inappropriate change may cause the computer not to run properly or even the need to re - install the operating system. Since then, I have never done this before... I need expert advice on how to fix this problem please...

  Thank you!

  Frustrated-SD Tech

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  Try repostin your question in Forum Vista programs at the above address.

  They will help.

  Cheers, Mick Murphy - Microsoft partner

• BlackBerry smartphone Error 1402 install Blackberry Desktop Software on Windows7

  When I try to install the software of blackberry 6.0.2 on my windows computer desktop 7, I get the following error:

  Error 1402.Could not open key:

  UKNOWN\Components\ a bunch of numbers and letters\ a heap of number and letters

  Check that you have sufficient access to that key or contact your support team.

  I tried to find the key in regedit to modify permissions, and I couldn't find it.

  The first time I tried to install it I don't think I right click and run as administrator. I've tried since then, but I don't know if this old key is always what stop.

  I don't really know what to do next.

  Thanks for the help,

  Dan

  You can solve this problem by running regedit and navigating to ""HKEY_LOCAL_MACHINE-1-5-18\Components " "

  1. Then search for the first registry key in your error. It would be the first string of numbers before a slash (/) forward.
  2. Then right-click on the key and select permissions.
  3. In the dialog box that opens, make sure that 'full control' and 'read' are selected for your 'User' and 'Administrators' accounts and apply the changes (if 'Administrators' and 'SYSTEM' are not in the list, you must 'Add').
  4. Click Advanced and check the check mark named 'replace all permissions of child object with permissions inheritable this object', then press 'Apply'. You can get an error, that's ok.
  5. Click on the owner tab and select "Administrators" in the list box, check the check mark, called 'replace the owner of subcontainers and objects', then press 'Apply '.
  6. You will need to repeat once more bullets 4 and 5, and you shouldn't get an error the second time.

  Now, you need to repeat the process for the second series of numbers which will be located inside the first key when you turn open it is arrow.

  I hope this helps. I got the error on 2 different keysets popup. The third time that I have installed the software, I had no errors.

  Good luck

  Hioctane

• Problem installing Elements 8, Error 1402

  Hello

  First time user here. I just bought Elements 8 and during the installation, I get an error 1402. HKEY_LOCAL_Machine\Software\Classes\.jp2\OpenWidthList. Have instructions on solving this or can point me in the right direction. I hesitate to start searching the registry I don't have to.

  Thanks in advance.

  Can you please go through a similar note tech which is released for CS products and follow the steps mentioned in it, and then try again to install PES?

  http://kb2.Adobe.com/CPS/404/kb404622.html#main_Set%20permissions

  Kind regards

  Ankush

• Game Top Spin 2 ERROR 1402 could not open key

  I try to install the game Top Spin 2, but I have the problem with the Error 1402.Could not open key: UNKNOWN/components and more numbers.

  Any solution for Windows XP?

  Contact technical support anywhere where you bought the game.

• KB2631813 for Windows XP security update has failed repeatedly to install (error code: 0 x 8007003)

  original title: KB2631813 for Windows XP security update has failed repeatedly to install

  Update KB2631813 for Windows XP security repeatedly failed to install - error code 0 x 8007003. All other updates install successfully. None of the proposed solutions have worked so far including clear update history.

  should [1] I really KB2631813?

  [2] my computer seems not to like it.

  [3] do you think that KB2631813 is really all this effort?

  A1. Yes, as much as you need at every update of safety critical other.

  Note that the vulnerability being patched (e.g., MS12-004) requires KB2598479 and KB2631813 to install! IOW, your computer is still vulnerable to the exploit if if KB2631813 is not installed.

  A2. Your computer 'loved' KB975562 (which is replaced or replaced by KB2631813), so it should also 'like' KB2631813.

  A3. Is the security of your computer and data to this topic (e.g., banking online & credit card passwords) really this effort?

  Repost...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.