CF stand-alone Windows Server 2003 user account authentication

Similar Questions

• Windows server 2003 users automatically gets an email when I set up in Active Directory?

  Original title: Windows Server 2003

  It comes to the associated user account.  I need to add users that I know how to do, but they will automatically get an email when I set up in Active Directory? The e-mail server has been implemented.

  I suggest you post your question on the TechNet Forums, where we are the support technicians who are well equipped with knowledge about Windows Server and Active Directory. I've added the link below on the home on TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home

  See you soon!

• Windows Server 2003 cannot connect multiple users.

  I have a server with windows server 2003 and active directory configured to log users on a network. Not on RDP, just ordinary field. The problem that I am facing is that only my account and the administrator account can log on. I have another account to try to test with, but it is said, no newspaper on the servers are currently available to take your request. How should I do?

  I have a server with windows server 2003 and active directory configured to log users on a network. Not on RDP, just ordinary field. The problem that I am facing is that only my account and the administrator account can log on. I have another account to try to test with, but it is said, no newspaper on the servers are currently available to take your request. How should I do?

  Beyond the reach of these consumer forums.

  It is the only domain controller in the domain?  Have you gone through the troubleshooting steps basis for DCs (DCs)?  If the machine you are trying to connect using the credentials of domain see the domain listed in ADU & C, etc.?

• 10 GB running under LocalSystem on Windows Server 2003 account

  Hello
  
  I have an Oracle 10 G database running on Windows Server 2003 SP2. I created the database and everything works fine, while the service is running under the local system account by default. However, when I change the user that the service is running in regards to a different account of the database starts and opens and I can log on as unreserved SYS using a connection but I'm unable to open a session any other user through the listener. The listener responds to TNSpings, and everything seems OK. When I turn it on to the local system user, yet once it all works very well.
  
  Can anyone offer advice or assistance?
  
  Thank you
  Rob

  It is probably because the listener is still running under the local system account. Have you tried changing the listener service runs under the same account as the Oracle service?

• Export security settings local to a stand-alone Windows 2008 server in html format

  Can I know how much is possible to export the local security settings (including local policies, event log, models of administration) to a stand-alone Windows 2008 Server to a single file (for example, html or txt)?

  I know that "gpresult" can do, but it works only on member servers. Can we capture output similar to a server that is not joined to the domain?

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• Impossible to logon to share the folder with "User must change password at the next logon" in Windows Server 2003

  I use Windows Server 2003 R2 SP2 as a file server.  I create new user 'A' in Windows Server 2003 as well with the option "user must change password at the next logon" selected and give way under the group users and users in the domain for this user.  I then share an output folder.  User 'A' is using Windows XP SP3 to connect to this shared folder.  However, when I try to connect, Windows reappear to enter user name and password.  I think it is the limitation in Windows that the user 'A' will be unable to change the password at the next logon or change password at any point in time at all.  Correct me if I heard wrong.

  If possible, can someone enlighten me what is wrong or what I need to do for user to access folder and change the password on the first logon.

  If what I described is not possible, is there another way for me to configure for the user to access share folder so that the user doesn't have to join domain or user of the AD?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  You will need to repost the above Server forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• User editable passwords deliver f / ACS 4.0 on Windows Server 2003

  I'm having a problem with the site of the UCP does not properly. I installed from the CD of ACS 4.0, following the instructions on the Cisco.com site, but can not go beyond the login page. Users can access the Login page, but after they enter their information (username / password) and click on connection, the server returns the following error page: "CGI Error. "Specified CGI application misbehaved by not returning a complete set of HTTP headers.

  I can't go through this page. I checked that site is installed as shown in the procedure of Cisco and reinstalled twice to check. I have everyone write and execute permissions on directories site and granted the Script of virtual directories and executable access.

  Any help on this would be greatly appreciated. I am to evaluate ACS 4.0 for deployment in our company, and UCP does not not is a major obstacle.

  Additional information:

  Windows Server 2003 SP1, the current patched to 29/08/06

  The ACS server is also running on this server. It has been installed and tested all first, before installing the UCP.

  Thank you

  John

  Change the user who runs CSusercgi.exe for Administrator.Refer the following steps install UCP 4 on a computer that is running IIS server, open IIS services manager, look for the default Web Site, double-click the virtual name 'securecgi-bin', right-click on CSusercgi.exe and click Properties, choose "File security" tab, choose "Edit" in the box "authentication and access control." change user IUSR_ to 'Administrator' and enter its password.

• Said updated stand-alone Windows Setup program do not apply to this system.

  I tried to download and reinstall the stand-alone windows installer, but get the message that no update available for this system or this download does not apply to this system.  Standalone Installer, I think it's a system XP instead of Vista Home Premium 32 bits of the system. How can I uninstall the stand-alone Windows Installer and install one for Vista?   Is it important that I have a desktop computer that has XP on it?  I also rename the laptop with the Vista program to my name. Is it relevant. I tried to reverse the name

  Hi Rockyakauke25,
   
  Welcome to Microsoft answers community forum!

  This day stanalone you trying to install?

  Try to install the update in safe mode.

  Try to install the update in safe mode and see if you are able to install. Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  To start in safe mode, follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2   , do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  Install the prerequisite updates before applying a new update that is installed sp 1 for a successful installation sp 2.

  See the link for download of SP1 and installation

  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Try to run the system update readiness tool before installing the SP1 or SP2.
   
  The system update tool:
  http://support.Microsoft.com/default.aspx/KB/947821
   
  A software update is available for the Windows Vista installation:
  http://support.Microsoft.com/kb/937287
   
  Then download and install Service Pack 2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
   
  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• "Application has stopped working" - in windows 7 double started with windows server 2003.

  I did a system to dual-boot with windows server 2003 and windows 7 both 32 bit.

  Server works well, but in windows 7, not a single application as 'MS office', 'Adobe Reader10', "mozzila FF 17', USB modem software etc. can be installed." Application has stopped working-check online for the solution, close the program "-l' display message."

  These applications have been executed successfully on the same windows 7 installed alone, stand not to dual-boot.

  As for example, in the case of Mozilla, I get the following details of problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Installation of Firefox 17.0.1.exe

  Application version: 4.42.0.0

  Application timestamp: 5080c0b6

  Fault Module name: Firefox Setup 17.0.1.exe

  Fault Module Version: 4.42.0.0

  Timestamp of Module error: 5080c0b6

  Exception code: c0000005

  Exception offset: 00029000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: c828

  More information 2: c8281d65ef26473d0d73e61539f36991

  3 more information: c4b2

  Additional information 4: c4b2e9bb96fe79d0a8d8b1d891ab6cf4

  These BONES are compatible?

  What is the solution?

  Help, please.

  Thank you...

  Hi Sounak,

  Thank you very much for the detailed information.

  You did changes to the computer before the show?

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know the result.

• ASM Configuration on Windows Server 2003

  Hi all
  
  My Version of DB: 10.2.0
  OS version: Windows Server 2003
  
  I try to configure ASM on stand-alone server using DBCA, but when I try to start OCSS by running the batch localconfig file it does not work.
  
  
  Is someone can you please tell me where I am wrong

  SQL > create diskgroup data external redundancy disk
  2 'I:\ASMDISKS\ DISK1. "
  3 'I:\ASMDISKS\ DISK2.
  4 'I:\ASMDISKS\ DISK3 ';
  create diskgroup data external redundancy disk

  Maybe you caught ;-), looks like there's space between ASMDISKS and DISKn .

  Correct it and create it again. post if no errors.

• Windows Server 2003 migration

  Hello world

  According to your experience, I would like to get your opinion on the best approach to migrate a Windows Server 2003 domain controller and all the services available thereon.

  A few details:

  In our network, we have 2 Windows Server 2003, one is the domain controller that is the DNS server, DHCP server, file server, mail server (Exchange) and support our intranet (sharepoint 3.0). The other host our SQL Server 2005 (which has 2 databases, intranet and our ERP database).

  In our infrastructure, we have about 50 users, some printers (4) network and about 10 items of group policy.

  Thank you in advanced for your review.

  Best regards

  jneves10

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• My Windows Server 2003 Administrator password back to the old after reboot

  Well, it's quite strange and I think it affects my antivirus management. I can change the password using ctrl alt delete and it remains until I restart. When I reboot, it starts to complain that the new password I just. I can connect on the client with the new password I want to be, but he complains that the account must authenticate properly. I am at a total loss. Please help as I want to do out anti-virus for the client stations.

  Thank you internet.

  Leah

  Hello
   
  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Community forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Server 2003 Forum. You can follow the link to your question:
   
  http://social.technet.Microsoft.com/forums/en-us/home

• Windows Server 2003 R2 explorer.exe crashing

  Hello

  I am looking for help on a PC server.

  All programs work correctly and for all intensive purposes, the server is very good.

  The problem is that explorer.exe crashes every 3 to 8 seconds.

  I had a quick glance at the file hmdp and tbh it means nothing to me.

  Could someone kind take a look on it and maybe point me in the right direction?

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  [C:\Documents and Settings\electrical\Desktop\error files\explorer.exe.mdmp] Dump file loading
  User Mini dump file: only registers, stack them and portions of memory are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  Windows Server 2003 Version 3790 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: Server, suite: TerminalServer SingleUserTS
  Computer name:
  The debugging session: 04:48:47.000 Wed May 29, 2013 (UTC - 07:00)
  System Uptime: not available
  Running time: 0 days 0:00:05.000
  ..............................................................
  Loading unloaded module list
  ..........
  This dump file is an exception of interest stored in it.
  The stored exception information are accessible via .ecxr.
  (b10.700): access violation - code c0000005 (first/second chance not available)
  EAX = ebx 00000200 = 80070000 ecx = 003 has 0038 edx = 00000000 esi = 00000464 edi = 00000000
  EIP = 7c8285ec esp = 00f1a410 ebp = 00f1a480 iopl = 0 nv in EI ng nz cy ac pe
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000297
  Failed to load image C:\WINDOWS\system32\ntdll.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntdll.dll
  ERROR: Module load completed but symbols can be loaded for ntdll.dll
  ntdll + 0x285ec:
  C3 7c8285ec ret

  Any help would be appreciated more

  Colin

  Support for Windows Server is available here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  The forum, you are now aims to help users of the computer at home.