Change of hard disk

Similar Questions

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• Change of hard disk: System update will work?

  I consider changing my 7200 RPM HD with a new Intel Solid - State Drive 520 series 180 GB. How this will affect the use of the system to update? He will be able to detect and work with my new hardware, or it will stop working?

  Currently I left 725 days my Lenovo warranty. Change of hard disk would probably void the warranty.

  PC: ThinkPad X 1 (1294-2PG)
  5-2520M (2.50GHz), 4 GB RAM, 320 GB HD 7200 RPM, LCD 13.3 in 1366 x 768, Intel 802.11agn wireless, WWAN, Bluetooth, Intel HD graphics card, 1 Gb Ethernet, Ultranav, Secure Chip

  Hello.

  (1) you should have no problem with the update of the system after the upgrade of your player.

  (2) change the Player won't empty your warranty as long as you don't cause damage by improper installation.

  the player is called a "self-service CRU" (CRUS by). If you look at the hardware maintenance manual pg98 (http://support.lenovo.com/en_US/downloads/detail.page?DocID=UM006394), you will see that the disk is not #5 in the exploded view. a page to the bottom, you will see a single * in the RAW Id column for the items in the list #5. Scroll to pg97 and you will see the definition of a "CRU" self-service ".

  HTH a little.

• Restores possible OneKey Rescue button on change of hard disk physical?

  I am a very new user of lenovo and recently bought an Ideapad Y460.

  The default hard drive is 500 GB with a speed of 5400 RPM.

  I wanted to change my hard drive to an SSD hard to increase performance.

  Before doing so, I created a set of recovery plant (3 DVDs) discs using the pre-installed OneKey Rescue System.

  I am aware that for the button OneKey Rescue work, the system must have a separate with the original disk image partition.

  My question is that if I install a new hard drive, the recovery of the DVD discs recover the original function of my laptop, returns to its new factory-installed state?

  The OneKey recovery will work properly?

  The recovery disks sutomatically will make the hidden partition, the C and the disks on my new SSD?

  Thanks for your time and any help will be greatly appreciated.

  replacing hard drive with rpm higher can help you.

  (consider about upgrading ram, too)

  http://Forum.Lenovo.com/T5/IdeaPad-Y-U-B-V-and-Z-series/disk-partioning-and-OneKey-recovery-feature/...

  (please, hit that "accept as solution" response if any message helped you to solve)

• I change my hard disk 500 GB, he had a particion front and right is now read 300gh, how do I retrieve the disc?

  I tried to format it, but the phone told me I don't have enough authority.

  Hello

  ·         What is the brand and model of hard drive?

  ·         Internal or external HDD that you use?

  Method 1:

  You can try to fix this by checking a disk or disks to find errors.

  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 2:

  I recommend you change the drive letter for the drive and check if it solves the problem.

  a. Click Start on the taskbar, and then right click on my computer on the desktop or in the start menu then click on manage.

  b. under computer management, click Disk Management.

  c. in the list of drives in the right pane, right click on the removable device and then click on change drive letter and paths.

  d. click on edit and in the drop-down list box, specify a drive letter for the removable device, choosing one that is not assigned to the mapped network drives.

  e. click OK, and then click OK again. To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.

  Method 3:

  You can also check out the article below and check if it helps:

  Formatting disks and drives

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Note: Formatting erases all existing files on a hard drive. If you format a hard drive with files it contains, the files will be deleted. Make sure that you back up all your important data.

  Thank you and best regards,

• Qosmio F50-125: change of hard disk

  Hello.

  I would like to replace built-in HDD: 400 GB, 5400 rpm
  with other 3.5 "HARD drive: 320 GB, 7200 RPM

  The end user is able to do?
  In is it guaranteed?
  Can I use the rescue CD, which I created with the Toshiba utility (with current HARD disk) to preload the new drive with operating system and Toshiba Utilities?

  Thank you.

  Hello

  You cannot use the 3.5 HARD drive
  Qosmio F50 supports SATA 2.5 HARD disk

  Usually it s HARD drive no matter what speed it is.
  Important are the specifications mentioned above; 2.5 and SATA interface.

  With regard to the guarantee.
  Usually the upgrade of RAM and HARD drive should not avoid the warranty

  See you soon

• HP Pavilion 15-n067Sg: change of hard disk

  I want to change the hard drive on an HP Pavilion n067Sg 15.  It seems I have to disassemble the computer laptop everything. Can someone help me?

  Thank you

  Hello

  Hope this link helps you

  http://h10032.www1.HP.com/CTG/manual/c04439615

  Check the Page 67

• How to open my R5-571-59DC to change the hard disk

  Can someone explain how to open my r5 - 571 to change the hard drive for an SSD and increase the ram? Thanks much for any help.

  Course, the R series is similar, my R3 has twelve screws at the back. Once removed, the back is pried off. Doesn't have a lot of strength. Connectors must back spilled up to remove. The cables are delicate so always be sweet.

  PS there is a microphone (interlock) under one of the screws two Center. Machine does not except so depressed, so make sure that screws are tight.

• After change of hard disk

  When I change my hard drive of my laptop. computer watch

  

  What, in other words somethings else was unemployed? What can I do?

  My laptop is Dell inspiron 15 7537, and I change the same hard driver band for my laptop

  Hi James101ku,

  You must install Windows on your new hard drive. Please refer to my link below for a good installation guide for Windows.

  Good luck!

• Change the hard disk of 1.4 Ghz Mac Mini end of 2014

  Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

  My Mac is:

  Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

  So, my best regards to the community and hope for a response.

  I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

  • Samsung 850 Evo SSD
  • Cutting Ultra Slim 2.5 SATA to USB 3.0 aluminum hard drive external enclosure

  Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

  Good luck!

• Windows 7 it's without a permit after changing the hard disk (disk image)

  Hello
  I get a frequent reminder of microsoft my pre installed windows in unlicensed. I went through the process of checking online, but this has not helped (prompted him download fails during the installation). I recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & indicates the product ID.

  Can anyone suggest what I should do to get more of this?

  > I have recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & displays the product ID

  Retrieve the laptop using the Toshiba recovery disc after the HARD drive was replaced?

  The operating system which is part of the Toshiba recovery image has already been activated so the new activation should not be possible and necessary!

  Don t know what is the problem here, but I recommend you to reinstall the operating system once more using Toshiba Recovery disk (I hope that you have created in the past)

• DV6 - 6163cl: change of hard disk for laptop ide (ata) to Sata

  OK, I bought a hybrid of 1 TB HARD drive and it is a sata drive. I noticed that the 750 GB drive in my notebook is a disk Ide (ATA). How can I make the new sata drive works in this notebook? Or can I?

  Thank you.

  That's right, and your model may take a SATA III (6.0 GB/S) hard drive.

• I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

  Running Windows XP Home, I want to change hard drive as described above.

  As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

  Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?

  Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

  Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

• Cannot open acrobat 9 pro after upgrade mac and change of hard disk

  I worked with the Adobe Creative Suite and Adobe Acrobat Prop 9 years without any problem. Recently, I had to put my mac OS to El Capitan and replace the hard drive. Even though I reinstalled all data and programs of a time machine back up the new disk, since this happened my pro reader adobe acrobat does not open. It freezes. I don't know it is a compatibility issue with El Capitan or a problem created from the new hard drive, but I would appreciate anyone help and advice on how to solve this problem.

  Thank you.

  There is not acrobat reader pro.  There is acrobat pro (costs money and you have a serial number) and adobe reader (free and no series number).

  assuming that you have acrobat pro, uninstall everything which is currently installed by using the adobe uninstaller program.

  then install properly using your serial number and the installation file.  also, you need allow unidentified publishers:

  http://Mac-how-to.WonderHowTo.com/how-to/open-third-party-apps-from-unidentified-Developer s-mac-os-x-0158095.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• If I change the SO or change the hard disk, I lost the warranty?

  HP Pavilion dv7 - 7047cl Windows 7 64 bit

  Yes. HP will send even a new hard drive to install if the disk hard breaks down as collateral.