Changed D durning System Recovery drive

Similar Questions

• After system recovery driver problems

  After a total hard drive failure, I used the recovery disks to reinstall Windows XP Pro. Nine drivers are absent, and the customer support needed to help me find and install. The system is now updated to current levels and works very well. However two questions pilot apparently associated are:

  (1) when you start up the computer, a program called Apoint.exe is started from the STARTUP group. It does not end, but lies in the status bar at the bottom of the screen. When I click on it, I get a black screen with a symbol flashes in the upper left corner and a white square cursor. I can put end to the program with no problem apparent but would like to have complete normally or not run at all. Seems to be related to the touchpad driver.

  (2) from the start, something like 25 language files named Arabic.bin, etc. to let in the TEMP directory. They seem to be related to the Realtek Audio driver. I can delete them without apparent problem, but they come back the next time. Very annoying.

  oldrah

  uninstalling drivers, restart your computer and try the drivers from the link below:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-68007

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67783

  PS: If you would like more information, please, type post (0687, 0769)

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  Hello

  There is no download available from Microsoft Vista.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

  p.s. If the old hard drive is still installed and running before you change on hard drives and you never received the to purchase recovery discs, you can make the recovery discs from the recovery Partition which should be on the old hard drive. You will need to request that the manufacturer how to do as each computer manufacturer has their own way of making records of this partition recovery.

  It depends on the old hard drive still works.

• Problem of Pavilion dv67023tx, drive damaged, recovery system recovery cd does not work

  Hi all! I really need help

  I bought my computer hp laptop Pavilion dv67023tx July 2012.  When I bought it, they gave me a set of recovery disks. January 2013, I did a system restore. It was fine then.

  Later, after some software hp update my cd player began to eject automatically. The light of the hp on the lid logo disappeared also. My audio jack went wrong from the beginning. So for all these problems together, I took it to the service center, and as it was in warranty period, they sent to hp. 3 months later I have my laptop back, I was informed that hp has changed the hard drive, motherboard, cover, screen.

  There is a month Itried to install some of my software I used earlier, but they were not working. If I had no other way than a system recovery using this link

  http://support.HP.com/us-en/document/c01867418

  Then the main problem occurred. I couldn't do a system recovery from disk on my laptop. Then when I tried to do the recovery disks and he says, the system recovery disks do not support this computer. You are not able to restore this system with these discs.

  http://support.HP.com/us-en/document/c01868346

  This link said, maybe its because hp has changed the motherboard.

  Now what should I do? I need a factory. But recovery in my laptop drive does not work, my recovery disks do not work. Please help me out of this. Or give me email ID so I can contact HP directly with problems, I do not find anything.

  Others suggesting me to install a pirated Windows 7, I don't want it. I had a real windows 7 pre installed, why should I?

  I'm sorry but I can't help you with recovery disks not working is not on your computer, but I don't have an alternative. If you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Premium using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 by using the 25 digit product key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• The system recovery disk - how do without floppy drive?

  I am trying to create a "system recovery disk" as part of the TOSSHIBA ASSIST (protect and fix the section).

  However, before we proceed, I noted that he was invited to a 'floppy' create a recovery disc but this model without this facility data can be recorded on a CD. I didn't get throughout the procedure and find that I couldn't finish it due to no floppy drive!

  Or otherwise just use the product recovery DVD - Rom supplied with the laptop in case of problem... not sure if this would hold the same data?

  Any help is appreciated!

  Hello Christine

  If you look carefully on this print option (shortcut) it is written to create the CD drivers & tools and in aria info nothing follow description allows to create an external symbol to the top of the caisse de dépôt drivers & tools.

  You use this shortcut, you can simply create Tools & Utilities CD and not the system recovery media. I did a few times without any problem. Equip your optical drive for CD - R, click on this shortcut, click the button BURN.

  All that s!

• System recovery fails on the new HARD drive (HP - DVD, Vista Home Premium 64 - bit, DV4-1225dx)

  I have a Pavilion DV4-1225dx who had a hard drive failure. VISTA Home Premium 64-bit.

  Went to buy the oem HDD @ Tiger Direct (0A 56415 Hitachi Travelstar 5 K 320 Mobile Hard drive - 2.5 ", 5400 RPM, SATA 3 G, 250GB, 8MB Cache) but it was out of stock. I bought the proposed replacement (WD Blue 320 Mobile Hard Drive - designed for the calculation of daily - 2.5 "SATA 3 Gb/s, 5400 RPM, 8 MB c...)

  The HP system recovery DVDs work for more than 12 hours and fails. CTOERROR.flg

  ChkErrBB.CMD: Detect an error in the PININST_BBV

  ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

  In addition to a video driver not install, I found:

  C:windows\system32\Drivers\enecir.sys not found

  Recovering the system formats the HARD disk properly. After that the failure of the HARD drive recovery shows that:

  C: 38.8 GB free of 58.0 GB

  E: 2.02 GB free of 12.9 GB

  15 f009wm 8.1 WIN 64 bit
  Office Jet 2540
  P2-1113w WIN 7 64 bit
  G71-340US WIN 7 64 bit
  dv4-1225dx VIsta 64-bit
  zd7000 WIN XP Pro
  xv886 Millennium WIN / WIN XP Pro
  HP deskjet 6980xi
  HP pavilion xt236 / ze4200 WIN XP Media Edition

  found an another Hitachi 0A 56415 and was able to install with recovery disks. Have used the new and more great as a backup USB drive with in a disk caddy.

• ThinkVantage Button takes me to the system recovery after HARD drive partition

  Hello

  I recently bought a W520 with 4 GB of RAM.

  I bought 3 branches of more than 4 GB each, installed and everything was fine. Also, I shrunk the C: drive and created a new disk (D:\) from space, that I rescued after the reduction of the volume.

  When I start the laptop and you want to enter the BIOS setup by pressing the blue ThinkVantage button, she won't go to the BIOS Setup. Rather, it passes through the system recovery options.

  What gives? How can I go to the BIOS Setup?

  Thank you in advance.

  Continuously when the system starts, press F1.

• Split 13 x 2 PCs 13-m110dx: cannot perform the system recovery using a USB flash drive

  I just bought a Split 13 x 2 13-m110dx PC that came with Windows 8. I have upgraded the OS to 8.1 and made a copy of the recovery Partition using a USB flash drive, and deleted the recovery of the PC disk that I learned that I could do. However, when I tried to retrieve OEM provided using the USB flash drive by following the directions at creation and use of a recovery of Microsoft USB drive (Windows 8) "System Recovery" was not available to the title of "troubleshooting." I tried to tell it to boot from the USB, but it askes me to insert the support of windows or other media, but rejects the flash player. What do I do now because I have not all discs?

  To use the Flash created to restore the system to the factory settings, see "Recovering from a USB flash drive" appearing in the following link:

  HP computers - running a HP System Recovery (Windows 8)

  HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.

• change password System Recovery Options prompt system

  I am unable to boot in my system and, after my password is requested, it takes me to the menu Options for system recovery .  Not sure what I can do to solve the problem, I decided to leave a friend to take a look at the computer.  Only problem: I don't want to give that friend my password.  I want to change my password and then turn the computer back to this friend.

  My question is this: How can I change the password?  I was invited for the passwords to one of the two users - my name and some other account that I did not recognize (probably a system account).  I enter the password, then, in the System Recovery Options menu resulting I select command prompt and type net "user".  The only two users I see are admin and guest.  The user I selected when you try to access System Recovery Options is not there.  So, how can I change this password to users?  I can?

  Hi Terrafrost,

  1. are you able to boot to the desktop normally?

  2. what happens when you try to boot to the desktop?

  3. you cannot change the password for a different user from the recovery options account

• Cannot install Office97pro after system recovery using windows XP. System does not seem to recognize the drive.

  After system recovery cannot reinstall dvd office97pro. It seems that windows XP does not recognize the program on the disk.  Tested the dvd on my computer laptop windows 7, charges fine. Help!

  Hi Fred Chandler,.

  1. What happens when you insert the DVD in the drive?
  2. You receive an error message?
  3. You are able to use the other DVDs on the computer?
  4. Do you have any third-party DVD burning software installed on the computer?

  If you are facing a similar problem with all DVDs on the computer, refer to the article below and then try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you face this problem with the Office 97 DVD then I would suggest that you post your request in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• system recovery will not load a partitioned hard drive

  Hello

  My dell inspiron on vista Basic has been sluggish, so I made a few stop hard downs.  After this, windows will not start and repair windows will work (on the start menu).

  recovery system cannot read the partitioned recovery drive (backup).

  Sometimes the system will display unknown hardware error d000144

  my laptop is only 3 years.  never buy a dell again.

  New programs are malwarebytes and windows defender.

  Hello

  Here is the information of Dell for the use of their recovery Partition:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And how to use the Dell Diagnostics software, as appropriate test equipment, etc.:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/Setup.htm#1100569

  As the Dell recovery partition is a Dell product, for other questions, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or ask in the Forums of Dell Support:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• Driver problem after changing my operating system

  Hello

  I have a HP pavilion G6 2284 ca (C7C71UA #ABL). 3 months ago, I decided to change my operating system to windows 7 pro (I had windows 8), but 2 of my 3 USB port do not work. When I try to do an update, it says that I don't have the drivers for them. I tried to look on the HP website, but there is no driver for windows 7. You have an equivalent for drivers?

  Try > AMD USB 3.0 driver

• Pavilion new hard drive XP Media Center Edition 2005, won't boot from the system recovery disks

  Hi, I'm trying to replace the hard drive in Pavilion a1620n a member of the family with XP Media Center Edition 2005 where the original Samsung SP2504C HDD failed.  I HAVE the original recovery discs 1 and 2 system and additional recovery disk supplied with the PC but the problem seems to be that I can't get the PC to boot from them to start the recovery process.  I installed a new Western Digital 500 GB HARD drive.  The BIOS recognizes it is installed (as well as the existing DVD - RW drive) and drive past the on-board CHIP support tests.  I tried using the Boot Menu ESC to select the DVD - RW Drive as the first Boot device, as well as the tab Boot Setup of BIOS F1 to set the 1st boot CD-ROM device group and other people with disabilities.  After reboot, the drive of DVD - RW turns on for about 2 seconds, then turns off and the display shows "DISK BOOT FAILURE", INSERT SYSTEM DISK AND press ENTER.  I thought maybe I needed a kind of bootable CD boot disk to format the drive first, so I tried a BACK 6.22 bootable CD and a bootable CD of MEMTEST, that work on the other PC, but I get the same message "DISK BOOT... "on this one.  My next idea would be to try to host the new drive on another PC and copy the files on it recovery disk... but is it really necessary?  If the own PC system recovery CD should not be able to... Recover?

  It seems to me that the ligthscribe drive has a problem.  Replace the disk and it may be OK after that.  On a PC so old, it is probably an IDE drive, but check first.