Similar Questions

• Plug-and-play driver needed

  Hello

  have some problems with the plug-and-play driver - can not update, as it "works fine and any updates do not need" according to windows. But is that the plug-and-play driver problem is the reason for sound, webcam and some other functions do not work properly. Also can not find the plug & play driver among the drivers in the other. Can anyone help with this issue?

  Hello

  Sorry, but I don t know what you mean with the plug-and-play driver. What part of the hardware, you need another driver?

  In addition, it would help if you post your model correct portable operating system.

• A plug-and-play driver convert error

  Hello, I ' m trying to convert the plug-and-play driver that will be used in LabView. In one of the previous where the drivers were the same, is successful, but I have an error.

  http://forums.NI.com/T5/LabVIEW/is-there-a-similar-labVIEW-driver-to-the-one-on-NI-website-for/m-p/8...

  VXIPlug & play Driver for 4395 has: http://www.home.agilent.com/agilent/software.jspx?ckey=2249830&lc=eng&cc=LV&nid=-11143.0.00&id=22498...

  installed in accordance with the recommendations of Agilent.

  Convert by: LabVIEW 8.2 and generator of jamming of LabVIEW for LabWindows/CVI 1.1 instrument Drivers

  Error: During the conversion, everything is going well, but in the end apers Conversion report that no screws cannot be created.

  

  Is the problem in my old version of LabView or somevere else?

  Follow the link... install Agilient IO libraries

  ARRRRGH!

• CQ40 - 714br: a media computer driver needs is missing

  I tried to reinstall my windows 64-bit, but I still get the message of a driver needs media, your computer is missing. I tried to install different isos, tried to boot from usb and dvd and also I tried to download all the drivers and put them all together on USB for charging on the installation via the button in the browser. Nothing works. ):

  Hello:
  
  Have you tried using USB recovery? If not, I'll try that first.
  
  My only suggestion would be to try to re-download the ISO through MSDN account & make a bootable USB, maybe the ISO precedent has been altered somehow. I don't know if they are still working in OEM machines, regardless of the way in which download you it from.
  
  http://www.heidoc.NET/Joomla/technology-science/Microsoft/14-Windows-7-direct-download-links
  
  Concerning
  
  Visit

• The driver NI-VISA Wizard and command of the SCPI

  Hello

  I had a go with an assistant driver NI-VISA. I wanted to create a driver for MH3114 DAQ. Assistant hollow went very well, and the driver has been installed.

  However when I did * IDN? under MAX, I received an error.

  This means that I have to create/put into practice all SCPI commands?

  How the wizard is designed to work?

  Hi MimiKL,

  As Dennis said, instruments are designed to work with the SCPI commands or not. If the user guide does not indicate the device meets SCPI and SCPI commands will not work.

  The wizard of the driver simply generates a number of screws that will send the standard commands of the SCPI compliant instrument of the SCPI. Depending on how you communicate with the instrument (bus), you may need to change these screws subtly to work with different instruments. But, as mentioned, if the device you are trying to contact is not in line with SCPI then this is never going to work. Later, when you use the Assistant driver, all the subVIs generated will be have comments in them tell you exactly what to replace and change to get the driver working for your instrument.

  If your device is not in line with SCPI and you have a dll that works then you should continue to use it.

  Best regards

  Chris

• How to start the wizard for the Driver NI-VISA development

  IM reading this manual:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

  "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

  but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

  In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

  The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

  http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

• Uninstall the Driver nor visa 3.0.1 to install 4.2

  Hi all

  I need to install the Driver or visa 4.2, but should I uninstall visa or 3.0.1 firstly to let the 4.2 to be effective.

  But I have some problems to uninstall the Driver nor visa 3.0.1.

  I wait your help for how to uninstall it.

  Thank you

  Thank you for your attention.

  I'm new on this. I just found how I can uninstall it from Add/Remove control panel part.

  Thanks for your time

  Problem is solved.

• This program of windows xp is on a Macbook Pro with a PC emulator. The drive needs to be replaced. How can I save the data from the side PC?

  This program of Windows XP (my wife) is on a MacBook Pro with a PC emulator (Bootcamp).  The drive needs to be replaced.  How can I save data from the PC to an external hard drive?

  Hi Alan,

  Thanks for posting in the Microsoft Community.

  I understand you are trying to backup the data on external hard drive since you replace the hard drive.

  I will definitely help you with this.

  Please visit the links; This should help you in files and backup files.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

  http://support.Microsoft.com/kb/308422

• Upgrades to Vista driver needed - Satellite M100

  Is there a complete list of downloads driver needed to repair the problems with the m100 caused by upgrading to windows vista? I have a lot of questions since doing so. I can get specific instructions as to what drivers for upgrade and links to Web sites to make them please. I'm not very proficient with computers. Thanks Nadine

  Hello

  I found this link:
  http://PC-support.Toshiba-Europe.com/Vista/

  There you can choose you country and you will get a special form for the Vista drivers.
  I checked the Vista for M100 driver are available: D!

• Compatible HARD drive need for my Satellite L655 - 1 6

  Hey everybody,

  my 4 year old Satellite L655 1 g 6 has recently had some problems and the hard drive needs to be replaced.
  Does anyone know about a cheap substitute that should not necessarily be the Toshiba?

  I don't want to do a SSD hard drive, as this laptop is old enough, and the cost for the ssd would not depreciate in the next years.
  Would be very grateful to hear some opinions/suggestions :)

  -Thanks in advance

  In general you need is of 2.5 HARD drive with connector SATA and these drives, you can find in every store of the computer. Pick up some info on the proposed models, capacities and prices so that you can make a decision that you want to buy.
  > I don't want to do a SSD hard drive, as this laptop is old enough, and the cost for the ssd would not depreciate in the next years.
  In my opinion it's the wrong opinion. Using SSD increase you the performance of laptop computer s quickly and were very quick machine. One day if you do not want to use this laptop, you can remove the SSD and put old HDD inside. SSD can be used on the new machine.
  For me, it's the best solution for you.

  Last year I've improved my 4 years old P500 with SSD and I m very happy with it. The price was only 149 Euros. It's OK price. Change the HARD drive is not complicated and you can do it alone.

• Qosmio F30 and Vista - mode ATK100 ACPI Driver need

  Hi people!

  I hope you can help me solve my problem. I ve installed Vista Home Premium on Qosmio F30 my friend (don t know for sure, but it's the model F30-100) and everything works great found nvidia drivers BT etc... but an error message keeps coming up when my screen shows: mode ACPI ATK100 driver...
  I tried to find a solution, but nothing seems to work...

  Help!

  I'm not quite sure what is the mode of ACPI ATK100 driver, need for, but I guess you can disable loading this driver in the msconfig or it could remove from the registry RUN m.
  EntVersion entVersion\Run

  This would prevent the driver from loading and the message would not jump upward.

  See you soon

• For the Driver NI-VISA Wizard error

  Hello

  I'm getting a "ERROR-1073807175: field of bLength is incorrect for USB_ENDPOINT_DESCRIPTOR type" this error shows immediately after I click Next on the first screen of the wizard of the Driver NI-VISA.  I see no errors after the wizard creates the USB driver.  In fact, I write for the endpoint device USB 4 using this driver for NI-VISA.  My problem is that I can't read of 3 endpoint.  I don't know if this error has something to do with my problem.

  Is there a way can I fix?

  The version of the Driver NI-VISA is: 5.4.0.49152

  Fixed a problem.  Disconnect the USB hub that is built on my Dell Monitor Help.

  Thank you

  Pablo

• HP pavilion 15-n248sa: a media computer driver needs is missing on 8.1

  "Sorry I have European account.

  Hello I have a problem, I used before archlinux now I want to reinstall agaion windows 8 in my 'Hp Pavilion 15-n248sa' hp, and I have problem during the installation I get an error

  "

  A media computer driver needs is missing. It could be a driver DVD, USB or HDD. If you have a CD, DVD or USB flash drive with the driver on this subject, please insert it now.
  
  Note: If the installation media of Windows in the DVD or on a USB drive, you can remove this step. »

  I look at the google and I found that I have to change usb 3.0, USB 2.0, but I don't have this option in bios...

  Also, I tried to load sata but it seems that the sata is not going... I will be very greatfull for help.

  Sorry, that didn't work.

  Are you sure have installation media good?

  Normally, you get this error when the installation file is not complete or corrupt.

  The driver ahci for the Pentium N processor does not exist.

  You can try the one I've attached below which I derived from the chipset driver, but I think Miss me the part of it.

  However, it was what he was in for this chipset chipset driver file.

• HP mini 110-3100: network contoller driver needed

  Network contoller driver needed

  Network controller hardware ID:

  PCI\VEN_168C & DEV_002B & SUBSYS_E016105B & REV_01
  PCI\VEN_168C & DEV_002B & SUBSYS_E016105B
  PCI\VEN_168C & DEV_002B & CC_028000
  PCI\VEN_168C & DEV_002B & CC_0280

  @mini3

  Try this one.

  https://www.Atheros-drivers.com/download-driver-Nr-300-for-Atheros-AR9285-and-Windows7.html

  REO

• The wizard of the driver NI-VISA creates drivers that are compatible with the 64-bit Windows XP/Vista version?

  The wizard of the NI-VISA driver creates drivers that are compatible with 64-bit Windows XP/Vista?

  InfiniteNothing-

  If you use a 64-bit compatible version of the NI-VISA driver, then the Assistant of the Driver NI-VISA is expected to create device drivers compatible 64-bit running in 32-bit mode.  You can find the various drivers of NI-VISA at http://joule.ni.com/nidu/cds/fn/p/sn/n23:1640/lang/en.

  Take care!