Changing of connection to the horizontal center position

Similar Questions

• I keep losing my connection to the Media Center on my D-Link DSM 750

  I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?

  Hi Ghostrider457,

  Are a. When you facing this problem?

  B. you get errors?

  C. recent changes made on the computer?

  Method 1

  Try temporarily disabling the firewall/antivirus software and check if the problem persists.
  Turn on the firewall / antivirus after you check the status.

  Method 2: new user account

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try and tell us the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Xbox 360 will not connect to the Media Center after that PC has been asleep

  My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.

  Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.

  Hello

  (1) did you make any changes before the show?

  (2) is the specific question when the computer wakes from sleep?

  This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.

  Method 1: Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Method 2: Windows Media Center Extender: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Reference:

  Set up Windows Media Center on the Xbox 360 (Windows 7)

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Windows-7

  Let us know if that helps.

• EncoreCS4 never be able to connect to the Resource Center

  I just bought and installed first Pro CS4 and though I try at different times of the day (the United Kingdom) I can never connect to the Resource Center. I always get an error (0).

  I tried to ask Adobe help, but the only answer I got is a PDF file that wonder a response!

  Enamel in which sometimes tells me that the PDF file contains THEIR answer... but it's not.

  I'm the only one having this problem or is there a solution?

  Help, please!

  Keith

  Check if your preferences to update Adobe has still not controlled. It does seem that the updates for the products checked in prefs

• RTC-5260: unable to connect to the control center

  Hello gurus,
  
  I get an error when I try to deploy my paintings, maps and dimensions
  
  RTC-5260: unable to connect to the control center, check it please you provided correct host, user, password, and Service name.
  RTC-5301: the Service control centre is not currently available.
  
  To find the errors, I ran the service_doctor.sql file and got the following response
  
  SQL > @C:\OraHome_2\owb\rtp\sql\service_doctor.sql

  there are errors in one or more packages PL/SQL and functions

  of the platform properties have been loaded properly
  Location of the platform were seeded correctly
  NLS messages have been loaded correctly

  at the service of the platform is not available
  There is an access problem to the startup of the service of the database script

  Server

  here is the detailed error that contains the name of the start

  script file:-

  starting Service "C:\OraHome_1\owb\bin\win32\run_service.bat" file is

  not available from the server of database on the instance of number 1

  Please make sure that the disk containing the file is visible in the

  database server

  is it you Please check that the database server account has access rights the

  file

  there is a problem with the connection to the repository information used to

  start the service of information

  here is the detailed error that contains the connection

  to the service:-

  can't access the owner of the database password repository

  Server

  Please check that this information is accurate
  If this information is correct, then please use the

  'set_repository_password.sql' script to reset the password stored
  
  PL/SQL procedure successfully completed.
  
  Can someone help me find the solution
  
  Thanks and greetings
  Pratik Lacoste
  DBA Oracle Jr

  I want just to know more about it then you can tell me the reason for the error...

  For example look at this thread
  Error when you try to deploy a DBLINK mapping
  or search on Metalink owb ora-01882

  Kind regards
  Oleg

• Xbox 360 Media Center Extender loses the connection to the media center to Windows 7 after change of router

  I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender.  The two connections to the same wired router.  Everything worked fine until I went on my old router (failed) and put in a WNDR4300.   After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added.  It worked but after I shut off/started the xbox, no link.  It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.

  Check/change:

  -J' changed to a static IP xbox

  -There is no part 3 a / v or a firewall on the support center

  -L' on the media center network adapter is 'home '.

  -The network card on the media center * fact * show the xbox 360

  -The event log after the xbox is restarted shows:

  event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)

  -How long before it, I have found that the service IS running upnp device host (and set to auto)

  -J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)

  question, any ideas what configuration will solve this problem?

  Hello

  I suggest to look and ask here:

  https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav

  http://forums.Xbox.com/

  http://www.thegreenbutton.TV/forums/

  See you soon,.

  J

• Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

  I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

  I read your question. I asked you what happened when running
  TV Setup and specifically want to know if the TV Setup detected your set top
  Box/decoder and it happened. If Media Center does not automatically detect your decoder,
  have you tried the manual method to learn codes? I'm trying to help you
  features of Media Center EPG.
   
  You must ask the FIOS people if they have the equivalent of a DTA
  offered in the world of cable and OTA.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Unable to connect to the Update Center

  I just finished my fifth unsuccessful attempt to install jdeveloper 11.1.1.4 on a laptop from scratch. I already had a 11.1.1.3 installation and work of the need to upgrade to 11.1.1.4 to align with the SOA server I have deploy across the network.
  
  I removed 11.1.1.3 and 11.1.1.4 facilities (via windows install/uninstall program, and then manually deleting directories that they were in), and then try to reinstall several times, remove after each unsuccessful attempt).
  
  My problem is when I try to install the extension of SOA. After the initial installation of the software in JDeveloper, I'm going to "Help"-> "check for updates... ».
  Rather than see a list of locations to update I get a popup on top of the Update Center popup, which claims that it is:
  
  Unable to connect to the internet to check updates.
  
  If you are behind a firewall or use a proxy to access web pages, check your settings of proxy below and click OK to try again.
  
  Normally, I use a url of proxy auto to manage my access to the proxy for that so I'm VPN would be in my company or not, Firefox handles my access network correctly. Because it is not an option in the context menu, I found a proxy host and tried to use it while I was VPN in. That has not helped - I tested the proxy of the popup and it failed. I Redid the installation 2 - 3 times while only had in VPN, then abandoned.
  
  So I uninstalled everything, disconnected VPN and did another fresh install. There is also no in the same way (Nothing in the center of update list and I got the same error popup).
  
  It's a mystery all that JDeveloper is really doing. It makes me crazy when the software works not seamlessly like this. I don't see what it is really doing, and the error message is useless or worse. (Why is she even suggesting that I provided a proxy when I'm straight on the internet. Why didn't he just tell me what he's trying to do, and, if I can fix it). I have a fine Internet connection that works for everything else.
  
  I know JDeveloper is still caching configuration information (my two projects appear in the list of applications), and so I guess that's also implementing caching some old login information that it does not show me. But I find no visible which erase and start over.
  
  Anyone know how to get JDeveloper to just try to connect directly to find update centers after that he cooked the old way to do it in a file somewhere hidden?
  
  Thank you

  Hello
  If JDeveloper is installed successfully, then you are good to go. Come to the addition of Extensions for SOA, BPM etc, you can do this either online (directly and update the Oracle site) or offline also. Average offline, first download the corresponding ZIP extension files for your version of 11.4 JDev as a composite model soa, bpm, Publisher etc. Then click on help-> Check For Update-> ignores errors or the pop-up windows and cancel-> them on the screen main down check the box named "install local file". Here browse and select a zip file at a time and move forward.

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.SCA.Modeler (Oracle SOA Composite Editor-> 11.4)
  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.BPM.fusion.Studio (Oracle BPM Studio-> 11.4)

  For SOA/BPM, simply just above 2 extensions.

  Thank you
  Ravi Jegga

• I have a fish snap account, but I can not connect to the Print Center e

  I am trying to create a newspaper in Print Center e I bought an officejet 8600, I winked fish account how I link them together.

  Thanks for your help,

  Erik

  You will use your information to Snapfish for ePrint newspaper, and if you get wrong to remember that or if you want to change any of this information, you can do so through Snapfish that will transport you to the thread at ePrint.

  You may need to do this anyway in case the password for Snapfish is not strong enough for ePrintCenter.

  Let me know! Happy new year!

• Smartphones blackBerry background image changes after connection to the blackberry Manager

  I am a new owner of blackberry curve 8330, and I'm still trying to get all the options work correctly.  A small problem I have is that my background image changes to the original image, the phone came with once I plug it to the blackberry manager to synchronize.  I guess that there is a setting I'm missing.  Can anyone help?

  I think I solved it... Is your Photo in the background in your "Device" memory or your press card?  If in the support card, once you sync, he returned to the screen of origin for your theme.

  I went in the media, opened the photos, parades in my current photo card and while in the photo, I hit the menu, and he has a line of "move". Click on it and you will see Media Card and below will be the memory of the device. Click on the memory of the device and it will be moved here. Now, click on the photo and set it as the background of your screen.

  Now, when you synchronize, it will NOT be moved.  It worked for me, I would like to know if this is the solution for you.

  Godd luck!

• How to change repository connection in the Console of the ODI

  Hello

  I use ODI 11.1.1. During the configuration of the Console of the ODI, I used a Master & working (for example, DEV_MR & DEV_WR) repository. I was able able to connect to this repository of Console ODI.

  Now, I created another series of Master & repository of work (e.g. DEV_MR1 & DEV_WR1). How can I create repository connection to connect these repositories?

  My next question is, after you create the repository connection to these repositories if I create a user through ODI Studio. ODI Console does not logon with the user created. How to solve it?

  Please help me.

  Thank you

  MT

  If you just want to point your console ODI new rest and then update the connection details in your pool of connections from Weblogic to point to the new repositories. You will need to restart the Weblogic service after doing this for the new connection to master to be picked up repository.

• Tecra S3 does not start when the multimedia center of Toshiba is connected

  Whenever I (re) start my Tecra S3 with the powered gigastore on (which is connected to the Media Center which is connected again to my dock via USB), my laptop only shows me the "toshiba" screen and doe not continues the start unless I turned off the gigastore and restart the laptop.

  What can I do?

  The same thing happened on my laptop while my external USB printer is connected to the computer. It has something to do with the BIOS.
  Hmmm, you can try to change the boot order in the BISO. Probably, it helps.

  I was an unlucky boy because the change of the boot order has not improved the situation. I had to unplug the printer or turn off the printer during the start-up procedure.

• Fire power User Agent is unable to connect with the power of fire management center

  Hi Cisco supports,

  I have problem with firepower User Agent, when I want to add a power of fire management center agent, then I get the error "cannot connect to the management center of firepower." You can find the error in the attachment! I have already added the User Agent in the CMF.

  My Version of power of fire management centre is 6.0.0.1

  and my 2.3 10 User Agent

  Hello

  You don't need to open it manually. If you have added the CMF officer, then it should be opened by default. What I wanted was to ensure that there is no intermediate firewall between the agent and the CMF.

  You can capture packets on FMC cli and check if traffic reaches here.

  > tcpdump-i eth0 port 3306

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Where is the Position of the Horizontal slider?

  I use more CC2015 after the last update, I hate it! One thing that I use a lot in the control bar is the Horizontal cursor Position indicator. Where is he now? I tried to turn off things because of BIG how freakin ' everything is now, but I can't show him.

  Roll back to 11.3.

  I explain how do it in post 132 of the https://forums.adobe.com/message/8880541?tstart=0#8880541