Re: Apex 3.0 insert function works, but the trace is not found

Similar Questions

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

  I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

  Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

  Ed

• I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed] is valid but the product was not found on this computer HELP!

  I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed by Mod] is valid but the product was not found on this calculation? Help!

  More information about this error is also available onhttp://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html who can refer you to contact support if necessary.

  Concerning

  Stéphane

• Creative cloud says that I have installed Premiere Pro, but the application is not found.

  I bought creative cloud and the App LightRoom and Photoshop App appear fine, but Premier Pro is not found. It is said that it is installed.

  

  But, the app does not appear on the app page or even if I pick up the computer.

  

  I use Windows 10 and tried to uninstall and reinstall.  Where is he?  It is part of a different application?

  If you see this situation on a 64-bit computer, you can consult this document: App shows up-to-date when it is not installed

• Speakers work, but the microphone does not after OS reinstalled (dv6)

  Sound is played through the speakers, but the Bay internal microphone and external microphone device receive no signal. Windows recognizes these devices, but the volume on the sound Panel Monitor is inactive. In addition, the webcam works fine.

  I just reinstalled the operating system and everything worked fine before this date. I installed the driver IDT High Definition CODEC (same driver as before) and the Device Manager indicates that it is up-to-date and functioning normally. I am running the same OS as soon as before reformatting (Windows 7 64-bit).

  Yes, these devices are turned on and yes I have checked the noise levels of these devices.

  Laptop model: HP Pavilion dv6t-6100 CTO Quad Edition Entertainment Notebook PC LM720AV

  Thanks in advance!

  Update: when I try to run Sound Recorder I get an error message: could not find an audio recording device.

  Solved! I ran HP Support Assistant, and he recommended that I have install a BIOS update, I did. After you restart, audio input is recognized.

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Charger works, but the battery is not charging upward

  Hello!

  My Macbook Pro end of 2013 is connected to a charger, and the charger provides power to the computer, but the isn´t of battery to charge up. It remains on the same percentage of power, or even go downstairs when you use energy-consuming applications. When I click on the symbol of the battery on the top of the screen, it says in the tab that opens: "Battery not charging" (I have a non-English version, but I'm guessing that this TI something like this)

  Is there anything I can try to fix it?

  I managed to fix it, I just had to clean my charger port and it started working again!

• My email ePrint works but the printer is not visible from my account management

  I have not used the management related to my Photosmart B110a recently. When I need to adjust the settings today my connection attempt was intercepted and I was moved to the 'new' system. I was asked to create a new password that allows me to connect, but my printer is not related to the account.

  This means that I can't manage it. The e-mail address accepts documents for printing and prints on the printer, but I now need to add new addresses of e-mail senders.

  How can I regain control of the management of my printer?

  I deleted my print printer wireless settings and added. Disappointed but time is too important. In general a superstar HP - thank you.

• TouchPad Driver installed, but the synaptic ClickPad not found

  I have a problem with my touchpad. I already install the synaptic Touch pad. The touchpad is not more intelligent (can not perform gestures / sensitivity adjustment).

  When will 'Control Panel' > 'Mouse', the "Synatic Clickpad" tab isn't there.

  Please answer as soon as POSSIBLE. TQ.

  Hello:

  See if you install the most recent driver directly from synaptics works.

  http://www.Synaptics.com/resources/drivers

• I changed the batteries in the keyboard. Mouse works but the keyboard does not work.

  I changed the batteries in the keyboard (wireless laser 4000 desktop computer), the mouse works fine but cannot type on the keyboard. Any ideas? Thank you

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

  It will be useful.

• View heavy client work - but the HTML is not - using security server

  However, I better start a new thread after the marathon to get the heavy customer talk via security DMZ server... everything works fine now.

  I am now test HTML experience via the same security server... and get quite like I was getting with the thick client.  I cross any authentication, it says connection to the office and that's it.  Later says that the server has taken too long to respond.

  I now have a complete list of the rules of the firewall in any way.

  Clearly port 8443 is open from the Internet to the DMZ security server.

  I checked the rules and scanned, and apparently they let all ports open between the DMZ and internal both directions in our network...   I checked and 22443 is open on the desktop...

  Can someone tell me what I should look for the next please?

  Thank you

  Bill

  Make sure you go through all the steps exactly - config http://www.vmware.com/pdf/horizon-view/horizon-view-html-access-document.pdf

• exe version works, but the program is not

  I create an exe file, everything went well. I opened the exe file and want to start the program through 'In '. Then I get the attached message. This is an old Version of Labview (2009), which I converted in 2014. I miss smth, I have to add to get a program managed by exe?

  
  

• my internet connection is available but the web page not found

  I have vodafone internet connection but these days this internet succusfully connect but I do not find the web page.

  Hello

  1. what browser do you use?

  If you use Internet Explorer, then try following these steps and check if that helps.

  Method 1:
  Try to run Internet Explorer mode without modules and check to see if the same problem happens:
  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  Method 2:
  Try to optimize Internet Explorer and check to see if it helps:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  It will be useful.

• Hi, I searched the forums, but the site has not found an answer... How to "disable another computer" for lightroom 6 (not the version of cloud).

  Hi, I keep getting the message that I've exceeded the number of computers permit.

  Now, I disable lightroom on another computer... How do I do that?

  I asked the same question in the forum search... but has not obtained a great success in return...

  Thanks Michel

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server