'Check' media (failure) MESSAGE ON BOOT

Similar Questions

• Wandering failure messages

  Hello-

  I have a few projects that I've done recently and which seem to work fine when I play them back in Captivate.  I publish to swf files and download them on a LMS called Blackboard for my students to be able to read them.

  I find that when I go to test it online, casual check of failure messages until the user has clicked. Then he disappears and is always available if a wrong click occurs. It seems intermittent.

  Any ideas on what would cause an error message to appear with no trigger user?

  Betsy

  Hello Betsy,

  OK, it seems to be the same technique that I use in simulations (here students prefer simulations for events that I create only when the time pressure is forcing me to): I teaching and slides of the legends of text on the other slides to get smaller instructions. If there is not an action should be performed by the user (you know the simulations) makes a film break, especially since I'm also hide the legend text with a click as a trigger box to continue. But I never use a caption for the click box as you do.  You have kept the legend of failure for the click box, in order to have a way to notify users blocked on this slide, isn't it?  I'm especially by limiting the failure 2 here or do you cover the entire slide with click aovid box having to use the legends related to the click box. Regret not to be able to give you a tip right away, needing some time to see the question myself. Have you tried to push the box click on the timeline for begins a little later than the text of the legend?  Just a thought, not test it, because I would first see the question myself.

  Lilybiri

• Qosmio F60/05-PXE-E61 Media failure, check the cable of

  Hi, I have a new laptop Qosmio F60/05 which is now having problems starting.
  I bought on 29/12/2010 and used again except for the internet.
  On a couple of occasions, an error has popped up saying that the computer has detected movements of hard drive...

  I don't remember the rest of the message, but it's usually after I took the laptop on the coffee table for sofa etc.
  Only now do I think it's a problem because portable computers are designed for portability and should be able to deal with this kind of movement.

  Perhaps this error and the following are connected?
  This morning I turned on my laptop and it took a while to start. Then the error messages came up saying that she had to restart and to restart the "Media Failure-check cable PXE - E61" error message "PXE - M0F outgoing PXE ROM" "Insert system disk in drive."

  I'm not tech savvy and don't know what to do now that no system disk provided with the laptop.

  I have read other forums on other sites that say it is a hard drive problem. Is this true and can I consider warranty return?
  I can't believe, I get questions on a laptop the week old and I'm pretty bored...

  Help, please

  Lauren

  Hello

  Message PXE means that laptop would not boot from other sources, but tried to boot from LAN. But LAN startup was not possible and that's why you have received this message.

  In most cases the HARD drive was not found and so the laptop going at the start of LAN. In your case, I would recommend accessing the BIOS and check the status of the HARD drive.

  But if you start windows in safe mode or in other modes, this means that the HARD drive is ok.

• Faced with a failure of OSD task sequence. The failure messages in the end are: failure to file WIM mount (0 x 80070002) & Failed to create media (0 x 80070002)

  Hello

  Faced with a failure of OSD task sequence.

  The failure messages in the end are:

  --------------------------------------------------

  Has no file WIM mount 0 x 80070002

  Cannot create media 0 x 80070002

  CreatTSMedia failed with error 0 x 80070002 details MediaGenerator

  --------------------------------------------------------------------------------------------

  It comes via SCCM 2007 R3 and a version of Windows XP.

  I think 0 x 80070002 means "the system cannot find the file specified."

  But what file?

  How do you determine what the media Wizard is missing to generate this error?

  Is this a driver problem?

  Thank you

  John

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/configmgrosd/threads

  Hope this information helps.

• Satellite C855-1TD begins with the message "checking media [Fail].

  My Toshiba laptop has suddenly refused to work well, does not start. When loading from the initial loading of toshiba screen, a black screen will appear saying "Checking media [fail]" I tried everything I saw online that do not opening my laptop. It won't let me access the Bios and I tried all the combinations available.

  My laptop is a Toshiba Satellite C855 1TD and works on the windows 8.1 software.

  Any ideas? Thank you!

  Hello

  Usually, you should be able to access the BIOS by pressing F2 when starting the unit.
  I can't say for sure, but it seems to me like a serious equipment malfunction if you are not able to access the BIOS.
  Such a material problem serious may be related to motherboard problems, but also modules of memory RAM.

  In case you are able to access the BIOS, check if the HARD drive is still visible on the first page of the BIOS.
  If the disk HARD isn't visible, then the laptop cannot find a bootable device and therefore no error checking media is displayed.

• Satellite M30-704 slow start and IDE #2 0203 failure message after replace it

  Hello

  two problems:
  first after replacing the cd/dvd drive, my computer does not start now automatically and displays a "IDE #2 0203 failure" message. I can start then it but all of that takes time?

  second problem: until I can access any program, a message will appear: "apdproxy.exe - Application error - the application failed to initialize properly (0xc0000006)" appears twice before so I can continue and then the computer is very slow.

  Can anyone offer solutions? (ps - these two problems are not related that they occurred the month apart).

  Thank you, Gardiner

  (1.) I would say that the BIOS can't handle the new drive correctly because wrong settings master/slave/c-salt but he s strange the player is running.
  I think you should check in the Device Manager, the primary and secondary IDE channels.
  The transfer mode must be on DMA if available and the type of automatic detection device

  2.), it seems the ' apdproxy.exe is a part of the Adobe Photoshop or a similar application.
  This software may cause an error. So just try reinstalling this program

• Satellite Pro 6100 - invalid boot.ini file message at boot

  Hello

  Don't know where to start.
  I want to just run Office 2003 from my Satellite Pro. Had problems with the HDD so I decided to format using the recovery discs.

  Now, when I start the machine initially I get the following message: * invalid boot.ini file. Starting from c:\windows.*
  After a minute or so, the following message appears. * missing or corrupted system32.hal.dll file *.

  Any ideas how to fix this please?

  Hello

  Looks like the laptop cannot start the Windows operating system and a few files damaged or are missing.
  In your case, I would try to reinstall new OS.
  Format the whole HARD drive and try again.

  If the second installation does not help, then a HARD drive should be checked may be that you need a replacement.

  Welcome them

• Satellite C850-B991 cannot start - check Media [Fail]

  Hello

  I have a problem with my laptop C850-B991 Satellite, I can't start Windows and get the message "Check Media [Fail]" on a black screen, I can not also start for the installation of windows media, or install a new version of windows.

  How can I fix this please? I do not have the recovery media (DVD)

  For some reason your HARD drive is not accessible.
  You can enter the BIOS settings?

  If Yes, set it please to the default settings and try again.
  Check please if the HARD drive is recognized correctly in the BIOS settings.

• Sporadic fan starting failure message. This speaks to the need to replace the fan?

  Sometimes when I restart my desktop computer after being absent for a day or two, I get a message of fan failure.  I immediately turned off the computer. I wait a few minutes and try to restart.  The reboot is going well.  Has anyone else had this type of message?  What I need to check that the fan is a failure?  If this is the case, where you can hold a replacement fan?

  Yes, this is indicative of a faulty fan. I was getting messages from 'System fan failure' sporadic on my HP a1632x. I first removed all dust and dirt, then decided to put one or two drops of oil on the bearings and 'exercise' the fan to work the oil in the compressed air. Two years later, and not once fan failure message.

  According to the fan being a system fan or CPU fan may affect where you can hold a replacement. To start, try Newegg.com. Take the measurements of the existing fan. Check the BIOS for the fan RPM speed and buy the one that is at least this fast if it is 10% faster. Make sure that it is a three lead with tachometer coonector.

• I get the message "No. Boot Device Detected" in Vista

  I changed the battery in Dell Dimension e521 my mother.  Then when booting I get the message "No boot device found". I can continue and boot from the CD.  I tried to Dothe StartRepair bt he indicated there is no problems.  How can I fant6mes the startup problem?

  Hello

  Installation/configuration (BIOS/CMOS) often F2 as you boot then watch the screen - make sure that the hard drive is set
  first of all in the boot order.

  Check with Support from Dell, their online documentation, diagnosis and ask in their forums on any
  known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Failure messages can not be updated KB971029 Win Vista on YOUR site only showed 8007371C error Code is 80073712

  I was make failure messages can not be updated Win Vista only indicated on YOUR site 8007371C error Code is 80073712

  Benn has been trying for a few months. July 12 last day to support. Sent me him to all sorts of places to read things, nothing helps.

  Update fails: kb971029

  Error code: 8007371C NOT 80073712

  Hi ChuckEva,

  Check to see if this article helps you.

  You cannot install some programs or updates

• ORA-04031: unable to allocate 32 bytes of shared memory ('shared pool'.  Check your error messages for the cause of the error. (= &lt; POINTER &gt;)

  Dear team,

  We have for instance R12.

  DB - 11.2.0.3

  12.1.2 - application

  in this concurrent instance depressed frequently when checking of log file showing the error as

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic FDPCRQ met an ORACLE error. ORA-04031: unable to

  allocate 32 bytes of shared memory ('shared pool'.

  Check your error messages for the cause of the error. (= < POINTER >)

  .............................................................................

  APP-FND-01388: cannot read the value for the profile FND_MGR_STRTUP_THRES_TIME option in the routine, and routine.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  
  

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  Post: WARNING: mail_queue_enter: create file maildrop / 379309.437: permission denied

  Please guide me to solve this problem.

  Concerning

  Kumar V

  Dear Kumar,

  I suggest you to check the FND_NODES table

  1) connect to SQLPLUS as the APPS user and execute the following statement:

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  (2) If you have found that FND_NODES table with entries incorrect node (old node from the Source Instance), and then run the query to clean below

  EXEC FND_CONC_CLONE. SETUP_CLEAN;
  COMMIT;

  (3) then run AutoConfig on all stages, firstly on the DB layer then APPS and webtiers levels to repopulate the necessary system tables,

  and make sure that you are now able to see the correct entries in the FND_NODES table and start the application services.

  Kind regards

  S27

• Cannot automatically download new messages and auto answer with out-of-Office message must manually check for new messages, so he can do

  I use Mozilla Thunderbird 31.3.0. I know how to create a message filter, to implement a response message automatic, but impossible to get Mozilla to automatically download new message and auto reply with the message in the filter, unless I have manually check for new messages, this is the only way to make it work. I looked online and can't seem to find an answer to that particular question. According to everything I found, I have the right boxes checked in the server settings: automatically check for new messages at startup, check new messages, check for new messages every x amount of minutes. It's one thing to have leave my computer and open Thunderbird for this works, but having to manually check for new messages get the AutoReply to work defeats the whole purpose of having an automatic response, because I use them for vacations, holidays, etc. I wondered if there are security settings that cause this problem, but if so, I don't know what changes to do to them. Thanks in advance for any help. It drives me crazy.

  I find it a little odd that Thunderbird does not mail on the calendar, you may have an add-on or antivirus program that prevents this.

  Now shift while you start Thunderbird will begin with disabled modules to check if the messages are automatically.

  By air is to the right, use the autoresponder Verizons. This link might help with this http://www.verizon.com/support/residential/internet/highspeed/account+tools/email+tools/questionsone/85621.htm#
  You say that not having is not such a context in Thunderbird is something that needs fixing. This idea comes across because Outlook has such an option. what most people don't know of it only works with Exchange server. There is no "vacation response" in the specifications of the mail server so every server implements differently.

  As all cars have a radiator, you can't take any radiator, and simply put, they are subtly different even if they perform the same purpose. Goes same for stakeholders of vacation, they perform the same function, but they differ between brands of e-mail server software.

  Thunderbird leaves the server end to expose the feature, because they are really the only ones who understand what they were doing. Outlook exposes the option and especially greys out.

• Continue to receive the KB928365 when I try to start it I get a failure message.

  OT: How can I get them to stop sending me KB928365?.

  Microsoft keeps clogging my phone with this update line.  It's for .net Framework v2, but my computer has only v4.  I get the update, and when I try to start it I get a failure message.  How can I get Microsoft to stop giving this gift?

  Hide it.

  1. click on start, point to all programs, and then click Windows Update or Microsoft Update.
  2. click on customize.
  3. Click to uncheck the box next to the update you want to hide.
  4. expand the update you want to hide, and then click the checkbox "don't show me this update again".
  5. click on review and install the updates.

  Information about the update: https://support2.microsoft.com/kb/928365/en-au

  Known issues that may occur during the installation of the update

  • You receive a Windows Update '0 x 643' error code or an error code Windows install "1603" when you try to install an update for .NET Framework 1.0, 1.1 or 2.0
    For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
    923100

    (http://support.microsoft.com/kb/923100/)

    When you try to install an update for .NET Framework 1.0, 1.1 or 2.0, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  • You receive an error message "the folder 'Program Files' contains an invalid character" when you try to install an update to security for .NET 2.0 Framework
    For more information about this problem when you install an update to security on 64 bit versions of Windows Server 2003, click on the number below to view the article in the Microsoft Knowledge Base:
    923101

    (http://support.microsoft.com/kb/923101/)

    Error message when you try to install an update to security for .NET Framework 2.0 on a computer that is running Windows Server 2003 x 64 Edition: "Error 1324. The folder 'Program Files' contains an invalid character.

• scanner failure message

  My printer will not make copies or scan.  I get the scanner failure message.  Any options?

  With a scanner failure message there is no much you can do. The document below will take you through all the steps. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax:
  http://goo.GL/MCuNG