Cheesy screen with the ATI graphics card

Similar Questions

• Problem with the ATI graphics card in 200 M in a Satellite A110-334

  The computer is used both for the office and home (games, music, etc.)
  One issue after 6 months of use, but I can't get around it.
  When I start Quake 3, everything is good I can play for us Let's say 10-20 minutes.
  After that, I got a Blue Screen of Death, saying it was a mistake of memory connected with the graphics card.
  Windows "tells me" to change the graphics card (it isn't is not something I can do with a laptop ;)) or to contact the producer of material to change the bios because that something could be wrong.

  Well just thinking I could do on my own was to change the drivers (I found a few compatible with my card) but that did not help. I also tried to change the memory embedded amount used by the card (it uses x amount of available RAM), but does not

  Hello

  what you´re to help drivers?

  Already checked these drivers:

  http://www.OmegaDrivers.NET/

  Maybe it helps. Otherwise, you must send your machine to a service partner chartered for a checkup of material given that your machine is still in warranty and it won´t costs you nothing.

  Here´s a link to find the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Concerning

• I have a problem with the ATI graphics driver.

  My laptop has rebooted, twice so far, as I was watching an episode of a series, and in the center of the action it is said that: a problem with ATI Graphics Driver and the ATI graphics card has stopeed working 2 times, last occurring on the 11.06.2014 13:36.Steps are available to solve this problem... .but when I click on it it says that;

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  ... and I searched the internet on the microsoft.com site, and the page is like this:

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

  What can I do?

  You should go to this site and make sure you have the latest drivers for your video card.

  http://support.AMD.com/en-us/download

• Pavilion p6 - 2120t: Windows will not start with the new graphics card

  Installed a Zotac GT 740 profile down in my desktop PC graphics card HP Pavilion p6 - 2120t and now the PC does not start.

  HP Pavilion p6 - 2120t CTO desktop PC

  Configuration:
  Intel Pentium CPU [email protected]
  4.0 GB RAM
  Intel HD Graphics Driver version Family: 8.15.10.2291 dated 27/01/2011
  Motherboard: IPISB-CU (Carmel2) (1 open PCI Express 16 expansion slot pins)

  BIOS to Version 7.18

  Running:
  Windows 7 Home premium 64-bit w/service pack 1
  Two monitors (VGA, 1 digital port 1)

  Before installing the new graphics card, I replaced the power supply original 300w with a 400w power supply.

  For starters, I disabled the onboard graphics in Device Manager. Then, I opened the case and installed the GT-740 in the open PCI Express slot. I made sure that the card was fully engaged in the slot.

  I plugged both monitors to their connections voted on the new map.

  When I tried to boot the PC, the digital monitor displays the screen HP (the one that indicates which key support to achieve the start menu) and then frozen. No other entries of key or mouse have been accepted.

  The PC then sounds 4 short beeps (about 10 seconds between each beep) and then a long beep before turning off the signal to the screen.

  Then, I removed the new graphics card on the PC that starts then. I have reactivated the original graphics drivers and the PC then worked normally.

  Tried the above process two more times with the same results.

  I then went into the start menu to look at the BIOS. The menu of the BIOS shows two options:

  > Sources of boot UEFI

  Windows Boot Manager

  > Sources of boot legacy

  ATAP I CD/DVD player

  SATA2

  Hard drive

  SATA0

  Network controller (Realtek PXE B06 D00)

  PC using UEFI Boot Manager Windows boots normally

  I have not tried Legacy Boot Sources because I don't know which one to choose.

  I went to the HP site and looked for an update to the newest BIOS, but updating them is a rev version 7.16 while my PC shows my BIOS to version 7.18

  I know that others have had a similar problem but I have not seen a solution that works for my PC.

  Any advice would be welcome.
  Thanks for your time.

  Hello

  Your PC isn't spec'd to run Windows 7 using the Windows Boot Manager.  I expect to a UEFI-based graphics card likely to work on an HP PC that does not have a BIOS version 8.

  The below listed OEM HP, graphics cards should work in your PC using a normal non - UEFI W7 and W8 installation.

  

• Does not start with the new graphics card

  Hello. I have a P7-1058uk Pavilion Cleveland-GL8 motherboard with integrated graphics.

  I bought a new monitor that has resolution 2560 x 1440, equal the integrated graphics card can face if tried to to level with a Gigabyte GT630 card.

  When I start, I have now the chance to the blue HP screen but not more details. If I start with F10 or ESC key, I get a black screen instead. Whatever it is, I am asked to press ESC to enter in the start, but by pressing on the button has no effect and the computer just hangs. There is a cycle repeated very quiet click that sounds like the disk drive HARD trying to start then stop

  If I remove the graphics card and connect the monitor to the integrated graphics card then all's well again (but limited to the resolution 1920 x 1080).

  Perhaps foolishly, I assumed it was a problem with the residual power (300W) and not enough punch power to run the HARD drive. But who, after having upgraded to 650W it makes no difference. I also tried to download the NVidia drivers but it won't let me install because I can't get the computer to work without the graphics card and Nvidia install it because it cannot detect the hardware.

  Any ideas/help would be appreciated.

  Andrew

  You can have one of these motherboards that are not happy with NVIDIA graphics cards.

  This may sound a little weird, but it happens.

  The other possibility is that you have damaged your home x - 16 PCI Express by installing a map requiring more that the installed power supply has been able to provide.

  Kind regards

  ERICO

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• Help with the new graphics card on old pc

  I have a dell dimension 3000 'ya I know sad' I would like to add a graphics card and a new soft power since the wife won't let me buy a new PC GRRRR

  I have a GeForce 6200 PCI 256 MB dcr2 it will work in this pc

  I also bought a power electric double w 480 SATAs is large enough to run the new card and the pc?

  Thank you

  You can add the 6200 PCI if you wish.  It does not require an upgrade of the power supply however.  It will work fine on your PSU 250 watts.  I have the 6200 circulating in a Dell with a 250W unit just to get the higher resolutions than the integrated graphic card has been able to provide in support of a monitor.

• How to manually switch the ATI graphics card?

  My laptop is new Pavilion DV6T Quad edition. I want to switch manually between the graphics card Intel inbuild and ATI graphics card. When I check on the internet I have marine I can do this using the switchable graphics option in catalyst control center. But my catalyst control center has only the ability to assign graphic drivers for the application. Also, I've found I can by tyoing ccc ccc advanced on the start menu. But when I typed ccc in that I don't see Advanced ccc all search results I ccc's search results. Please guide me in manual switching graphics

  Hello, I believe that the answer lies in another thread that they keep as a «sticky' at the top of this section "Display/video"

  so here's the link to that thread, that you shows how to download the right driver BIOS and graphics, then how you set it manually in the BIOS for fixed, if that's what you want.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/official-HP-statement-on-switchable-graphics-and-Open-GL/TD-p/766285

  I hope that I understand your request, please let me know if this helps or not.

  Thank you.

• Lenovo M91p desktop does not boot with the new graphics card (Blank don't screen no BIOS)

  Hi all

  I recently bought a Lenovo M91p thinkcenter Desktop as an upgrade to my old PC i3.

  Old Spec is as follows:

  • Coolermaster Thunder 600W power supply
  • Card mother Intel DH55HC
  • Processor i3
  • Graphics HIS HD Radeon 7950
  • 8 GB RAM
  • HARD DRIVE 500 GB

  I transferred my HD supply and Power 500 GB old to new Lenovo desktop and everything starts very well.

  Then I installed 2 x 2 GB extra in the Lenovo M91p (which in fact 8GB) and updated the disk of 500 GB to 1 TB.

  So my new spec is as follows:

  • Coolermaster Thunder 600W power supply
  • Card mother Lenovo Q67
  • I7 2600 3.4 Ghz CPU
  • 8 GB RAM
  • 1 to and 500 GB HARD drive

  Everything Booted fine. Then I tried to install my old graphics (HIS 7950 graphics Radeon HD card) card. I got was a blank screen, no beeps, no BIOS... Nothing.

  At first, I thought that my diet was not enough... So I tested a 750W power supply in the pc. Still nothing.

  Then I thought that the motherboards BIOS was outdated... Updated... Still nothing. I even tried to update the firmware of the graphics card. Nothing.

  The graphics card works because I tested it in my old machine and it worked 100%.

  However, I took my graphics card to my provider and he tests it on another of his pieces... Did not work there either.

  My PC BIOS is not supported for secure boot, in case anyone wants to know.

  I am out of ideas now... Anyone able to help?

  There is a white list of graphics cards that will recognize the BIOS. The 7950 HD is a map of 180w, well beyond what the power plant can provide (and case/sufficient cooling fans for) and not a single one is that Lenovo would provide support for the BIOS.

  Use the search engine above to see what cards other owners have used successfully in their M91p.

• Workstation XW4300: xw4300 will not work with the recommended graphics card (Nvidia Quadro FX 3400)

  I installed a graphics card hoping to update my computer.  The Nvidia Quadro FX 3400 was the highest assigned

  graphics card recommended for the workstation xw4300 system HP specifications page.  My system

  has a 460W power supply and I connected the cable 6-pin on the map and the map pins in the PCIe x 16 slot where

  the old card was.

  When I turned on the machine, I don't have even get a bios message or welcome screen.  All black.  But on all 10

  seconds, the power would cycle off and then come back.  HP says that this map is supposed to work with my machine!

  This card appears, making it non-functional.

  Any ideas?

  I ended up going with the Nvidia Quadro FX 1400 card.  He is listed as 75W and the map of 'medium' recommended for this xw4300 system.  I paid 10 dollars for it on eBay and it works great.  Do not use the Quadro FX 3400 map even if it is recommended by HP for this machine.  Food can't support.

  A witch hunt.  Equipment old and new software don't always play nice.  My machine has a new installation of Windows 7 Pro 64 bit on it, and running Windows Experience Index gives me the blue screen of death.  I put a meter on the power during the test problems... No..  It's a kind of driver incompatibility.  Win 7 says that the driver is the last, but he chokes on the

  test the index.  Funny irony is that I ran other tests which include benchmarking 3D rendering and nothing, but the Microsoft Windows Experience Index test stifles this card.  How about you do not run the Microsoft test to improve my Windows experience.  :/  Go figure.

  This card is older hardware, and because of that I don't have hope than Nvidia or Microsoft to make Windows experience test runs correctly with win7 64 OS.  Sounds like HP.

  Here's the kudo: the guy on eBay who I bought the card quickly refunded my money when he learned about the Blue error screen of death in Windows performance index test, so I did a free card.  I'll send her money

  Back to him.  I've never met anyone so accommodating.  These companies could take a lesson from that on what customer service means.  That's how you get regular customers.

• Satellite L650-11F - cannot install driver page of the ATI graphics card

  I just bought a Satellite L650-11f and tried to update the drivers for my Ati hd5650.
  The problem is the control of catalyst can I install without problem but when I try to install the site display drivers driver ati I get this error:
  ATI catalyst mobility can t be downloaded due to the incompatibility of hardware/software on your computer. The version of your driver card is not supported. for an update of the graphics driver, contact the manufacturer of your laptop.

  How should I update with the latest display drivers cause the manufacturer are 6 months old?

  Hello

  You have a few problems with the Toshiba display driver?
  Graphics drivers from Toshiba are modified for mobile use, this means that the Toshiba drivers support for GPU overheating protection.
  ATI drivers don t support this protection and this is the reason why you get this message.
  Generally, you have to take the driver of Toshiba page

  Of course, it is possible to install the ATI drivers also.
  But you would need to install the driver in Device Manager.
  To use the Advanced installation procedure that would allow to choose the driver downloaded from the ATI page you simply forcing windows to choose such driver

  But note; You can use these drivers ONLY at your own risk

• Hello. I have some problems with my ATI graphics card

  I have a 4540 s HP's Probook. Whenever I open my laptop, it says this:

  WARNING: The Catalyst Control Center is not supported by the version of the graphics adapter driver you activated. If you please update your ATI graphics driver or enable your ATI card using the display manager.

  

  I tried to update the driver but it will not work. In addition, - sleep mode doesn't work for me. I don't know why.

  It has worked well so far.

  

  Some help would be really nice. Thank you for your time!

  Dark salvation,

  At this point, the best way is to go to:

  http://support.AMD.com/en-us/download/auto-detect-tool

  Download and run auto detect tool, it will install the best drivers for you directly from AMD support page, so you will solve your problem.

  A few clicks and the work is done!

  I wish you all the best, report it please if you have any problems!

  < < <-*.
  * Click on the star of CONGRATULATIONS on the left to say 'Thank you'*.
  
  Make it easier for others to find solutions by checking a response to "Accept as Solution" if it solves your problem.

• Need help with the new graphics card

  So my trusty GTX 555 is finally dying after 4 years and 10 000 + hours so I looked in an upgrade and heard the GTX 960 would be a good upgrade for an Alienware x 51 R1. So I got a PNY GeForce GTX 960 Amazon and installed but when I turn on my system it passes to the BIOS screen and is there for about a minute and a half and it beeps every 30 seconds after the screen came. After the minute and a half or two then goes to a black screen and says the brand and model of graphics card in the upper left corner for about 5 seconds, then he sits on a black screen. I did something wrong?

  If necessary system specs:
  330W POWER SUPPLY
  Intel Core i7 2600
  8 GB RAM
  Windows 7

  Have you updated the BIOS?

• With the new graphics card failure

  I tried to put a graphics card in my desire to 700-210xt, there graphocs of the motherboard and I need the output HDMI and DVI, which he did not.  I added an ASUS silent 210.  Power on or monitor the work and the computer beeps six times.  Monitor never works, not isolation, or duplicate, even if the computer doesn't seem to not be starting.

  Remove the graphics card returns the system operation.

  Suggestions?

  Hello

  See the HP document on the following link.

  http://support.HP.com/us-en/document/c03653200

  Kind regards

  DP - K

• (Redirected) upgrade my studio 9100 with the new graphics card and a more powerful power supply

  I have a studio 9100 with 525 usual w PSU. I need a processor amd or NVidia card and MI those watching amd r9 x 280 and 780 NVidia gtx need system in order to get a 750 w power supply. should I buy the card and the power supply through dell, or somewhere else?

  Hi michaelwilson73,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/