Choppy playback video then freezes, sounds good

Similar Questions

• freezing of .mts files choppy playback and consistent

  I recently bought the Sony NX3 to add to my arsenal. Unfortunately, when I import the first .mts files starts compliant video files and it takes some time. Not only that, but when I click on a file which is supposed to be consistent, the video plays back jerky and then freezes. The audio will continue to play but video just hangs. I edited before with NP .mts files even though they were HDV Files not 1920 x 1080 24 p. Mounting on a HP600 with Xeon E5520.  What are my options? I'd hate to have to transcode the files whenever I use the camera. Does anyone else have this problem?

  Bingo... it's this USB connection. Guaranteed that will b e ch o pp see.

  On the Page of the Tweaker (found on the forum hardware assets), they have a chart flow supported various internal and external connections by car & types. USB3 is much better than USB2 say... but still not fast enough for sustained Read/write speeds to be used for playback. Basically, for external, eSATA disks II or III or Thunderbolt are the only ones who can really carry the load.

  Neil

• Why some youtube videos run for a while and then freeze in firefox

  HI I have a problem with the firefox browser lasted. You see when I go on this site to watch a video witch is through video youtubthe will play for a little bit, then it will freeze but will continue to play the audio from the video, but the video is still frozen. I went in firefox and I went to tools and under privacy where it says clear recent history and I put a check mark to clear wrestled, cookies, Web site preferences and press the button continue. Then I went back to the site and yet once again, I did try and watch the video of youtube with the same problem, as described above. So I uninstall Adobe flash player and shockwave player and re downloaded times flash player and shockwave player and reinstalled them again. It doesn't help that the youtube video keeps freezing and the audio keeps time even when the video freezes in firefox.
  Edit: I was wondering your antivirus cause videos to youtube to freeze.

  Help would be appreciated please.
  some info that may be useful
  Firefox 36.0
  8.1 Windows 64-bit operating system
  Free avast 2015.10.0.2208

  Hello

  Try these tools that can help solve your problem. Sometimes the video loads slowly according to your subscription from your network provider network speed.

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have spend on them... Same video works fine on Chrome?

  When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have to go over it. I use Wuindows 7. The video will restart when I pass this pointer/mouse.
  The same video (s) works correctly when you use Chrome?

  This issue may be caused by malicious software.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

  I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

  It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

  How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Video call freezes and falls on Skype 4.3.0.7 Linux

  Hello

  I'm very happy to have an update to version 4.3.0.7. However, unfortunately, the video is freezing in each call and then the call is stalled.

  Symptoms:

  -Video freezes in Skype call.

  -L' call falls at about 10 seconds later.

  -Reproductible 100%

  System information:

  Distribution: ubuntu LTS 14.04

  OS type: 64-bit

  Graphics card: Gallium 0.4 on NV92

  Version of Skype: 4.3.0.7

  Change before that happens the symptom:

  -Uninstalled Skype version 4.2 (complete uninstall including parameters)

  -Installed Skype version 4.3 (in opening package multiarch in ubuntu Software Center)

  I could not find this problem already posted. I'm alone on this? If I can help by providing more information? Any help would be appreciated?

  I solved the problem by removing the account (. / Skype).

  And install the latest version 4.3.

  Happy now with the version 4.3.0.37 (instead of 4.3.0.7).

  Everything now works welll.

  Good luck.

• Satellite P20-761: Windows will not start - it loads agp.sys then freezes

  When I pass my laptop it starts with the Toshiba logo as if commissioning, but then the screen goes black with the following message:

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware of software change might have caused this... etc etc.

  Then I have a list of options to choose from:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good known Configuration
  Start windows normally

  If I have the choice between the options of safe mode the screen goes through a list of files ending with: multi (0) disk (0) partition (1) \WINDOWS\System32\DRIVE.sys, then freezes.

  If I have the choice between the last two options simply, the screen goes black and nothing happens.

  Of I'm desperate is not to lose all the data that I have accumulated on the laptop. Stupid me not a not bother with backups.

  Discs only can I find supplied with the laptop are 'tools and utilities' and 'product recovery dvd - rom '. Seeing that I am not a technical interest, I'm afraid to try just in case I lose all my most important files.

  Help, please! Answers must be plain English as like I said I'm not really technical. Thank you. I cross my fingers.

  Sounds like something wrong with the graphics card or with the graphics driver.

  I think that you have no other choice than to use the Toshiba Recovery CD and attempt to reinstall the OS. I hope that the graphics card doesn t malfunctions.

  It's very sad, because in this case, you will lose the data on the HARD drive.
  Optionally, you can remove the HARD drive and then to connect to little via the USB port on the other computer, then you can make a backup of your data.

• Sudden, Audio choppy playback unusable

  Now, I've been recording a podcast for a year, and all of a sudden my "totally-dial-in process" has ceased to exist. Sounds very well during recording. His property outside the hearing individual .wav files, but hearing audio is totally useless. The change is impossible. The sound quality is jerky, staccato, clicking, ticking, almost like fast cuts in and out - don't know how else to describe it. The strange thing is, I used a model with the same parameters for a year, and all of a sudden it began to arrive. I wouldn't change anything.

  Since then, I have tried:

  1. switching interfaces: Focusrite Saffire Pro with Focusrite Clarett

  2. hard drive cleanup, move temp adobe on external hard drive files. Currently using 200 500 GB on the main computer where the application is installed.

  3. update all the drivers and software.

  4. recording on ZOOM H6, with the same microphones - audio is perfectly clear and has been changed successfully by another hearing on an older Mac user. Same .wav files are useless when opened in hearing on my machine.

  Here is my configuration:

  -MacBook Pro 2012, OS X Yosemite, 2.7 GHz Intel Core i7, 16GB 1600 MHz DDR3, using 200 GB to 500 GB hard disk

  -Adobe Audition CC 8.0.0.192

  -Device class: CoreAudio

  -Heil PR40 microphones (4)

  -mic'd for Skype, Shure sm58 calls iPad (1)

  -Interface Focusrite Saffire Pro (worked fine for a year)

  -Focusrite Clarett interface, up to now, no difference in quality.

  Someone please H E L P!

  bdrobbin wrote:

  N ° not solved! It worked fine for an hour when I have updated software, but now (8 hours later) the problem is back. It's not as bad, but it is the same attack - almost staticky - rough with the song. How could a software update HALF-fix of the problem?

  I can't say what caused your problem, but I can assure you the update had nothing to do with his jerky! Usually, this kind of problem relates to the parameters of the memory buffer, and the first thing I would look at is the size of latency you use. If it is too small, then you will get choppy playback, as the buffer may empty more quickly is to fill - the degree to which this occurs depends on other processes on your computer at the same time, that generally, the effect is quite compatible. As in your case it starts after a certain time, then it's almost certainly something else in your computer where he, I'm afraid.

  Anyway, your first stop is Edit > Preferences > Audio hardware and experience with latency setting.

• Another question about choppy playback

  Hi, I use a new laptop from 64-bit Windows with processor i7-720QM Quad Core (1.6 GHz - up to 2.8 with turbo boost). I have a 6 GB ddr3 video card with memory and nVidia GeForce GT 230 M 1 GB dedicated graphics. I use a camcorder AVCHD (Canon VIXIA HF20). I get choppy playback. It is considerably improved when I changed my screen resolution of that recommend the EP 8, but playback is not quite there yet. All my AVCHD clips will play back fine with Windows Media Player. Firstly, my computer must be able to handle this, right? If so, so what exactly should I do to get the turbo boost to kick for this extra processing power? Any other advice would be greatly appreciated.

  -Patrick

  With a single HARD drive, even if a disk RPM 72 K, will fight to get there - the operating system, program, Page file, media files and make files. Things will be slow.

  Good luck

  Hunt

• Solution: CD - RW / DVD Rom stutters or has choppy playback

  My computer specs

  Labtop model: Dell Inspiron 5150

  DVD ROM: Samsung CDRW / DVD SN - 324B

  Problem

  After reformatting my hard drive, my DVD-Rom is more play DVD smoothly. I had the playback choppy or stuttering. I use Intervideo WinDVD. Thinking that WinDVD could be the problem I went to Windows Media Player 10, but instead of reading who stutters, the film played too fast.

  The reading was also weird, if I rebooted my computer and used WinDVD immediately, he would run smoothly, but eventually he would return to stuttering. Due to the eccentricity of this work and does not, it was difficult to identify a solution that has worked permanently (this is also the reason why I had edited this post so many times). So, I've listed all of my conclusions and solutions below.

  Solutions

  Difficulty 1

  Download the last update of the BIOS from Dell downloads.

  Here are the direct links for the Dell Inspiron 5150, I posted the update of WinDVD so. Since April 18. 2008:

  Update to the BIOS: ftp://ftp.dell.com/bios/I5150A38.exe

  Update of WinDVD: ftp://ftp.us.dell.com/app/R62171.EXE

  I guess this would work with the other laptop Dell with their respective BIOS updates.

  My results: Windows Media Player was playing much too fast, this corrects the problem DVD. However, regarding the choppy playback, I still had some problems.

  Difficulty 2

  Change your power settings.

  1. Open Control Panel
  2. Double-click Power Options
  3. Under the systems tab, select laptop

  My results: Combined with the update of the A38 BIOS, it seems to work ok.

  Difficulty 3

  It is recommended to make your IDE controllers are in DMA not PIO mode.

  Here is a useful link on the Dell Forum, he speaks of the PIO to DMA:

  http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=144385&query.ID=285841#M144385

  PIO DMA another link:

  http://winhlp.com/node/10

  My results: System has already been set to Ultra DMA Mode 2, so this fix did not work for me.

  Level 4:

  During choppy playback, I fiddled with the settings of DVD players and was able to play the DVD without problem.

  For Intervideo WinDVD:

  1. Right click on the area of the screen, select Setup
  2. On the Video tab, uncheck the "Use hardware decode acceleration" and uncheck the box "use acceleration hardware color."

  I don't remember the exact settings uncheck Windows Media Player 10. But if you want to try this solution with this drive, I can point you in the right direction.

  1. Go to tools > Options
  2. Then click on the performance tab
  3. Under video acceleration, tap Advanced Options

  There are options for the video acceleration and DVD video below. "Use Video Mixing Renderer", might be what I unchecked, you'll have to fiddle around for yourself.

  My results: Best solution for me, never had a problem since. I use Intervideo WinDVD. The colours become slightly darker; I think they look better. (Note: I installed the new BIOS before that)

  Message edited by jabberwocky2k on 03/05/2008 12:34 AM
  
  

• How to record video with no sound on the iphone 6?

  I would like to record videos with no sound, and then add the audio later.  Is this possible with the iPhone 6?

  I would say.  I want to just record the video on my iPhone 6 with no audio.  Is this possible?

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help the sims2 double deluxe loading and then freeze it!

  Recently I bought sims3 that plays very well, so I decided to get the sims2 double deluxe it will load but then freezes and the screen black, then tell does not.  I have Windows vista and the back of the box, it is said that it is running in windows vista.  Help, please.  I read one of the solutions was to delete your temporary files.  I'm not a computer person, so I'm afraid to remove or change anything.  I've updated drivers, changed to admin user and it compatible to windows xp pack 2.  HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Hello

  Welcome to Windows Vista community responses.

  What are the minimum requirements required by the game.

  Windows Vista, XP, Me, 2000, or 98

  1.0 GHz or faster processor

  256 MB or more RAM (512 MB required for Windows Vista or running with several expansion packs installed)

  At least 5.5 GB of free space on the hard disk

  DirectX 9 compatible .0c map video with 32 MB or more memory (64 MB for Windows Vista) and one able to t & following chipsets: ATI Radeon 8500 or greater (9600 or greater required for Vista); NVIDIA GeForce 2GTS or more (GeForce 6200 or greater required for Vista)

  Card compatible DirectX 9 .0c.

  Make sure you have the graphics card that meets the above requirement.

  Uninstall and reinstall the updated drivers for your graphics card from the computer manufacturer's website or graphics card manufacturer's Web site.

  Uninstall the game and reinstall it back and check if you still face the same problem.

  Put your computer in a clean boot the game game and check if you are still having the same problem.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Search for previous issues. If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796 .

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer

  I suggest also that contact the publishers of games for patches and updates on the game.

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

  My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

  Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

  The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

• erratic cursor and then freeze it

  How can I get my cursor to STOP jumping around on the screen and then freeze it?

  It is on a desktop or laptop?... What kind of mouse is used?

  Can you confirm if the problem is occurring in a particular program?

  If you use a mouse running on battery, then please replace the batteries to see if that solves the problem.

  Also check the underside of the batttery for signs of debris (lint/dust) which could interfere with the infrared light... (kick across the box to remove dust)

  If you are using a laptop, that this problem can occur by accidentally touching the 'touchpad' area while typing?

  If you use a laptop go to the Control Panel on theStart menu and select mouse ... make changes to the sensitivity etc to see if that helps... you can use the icon for the "touchpad" found in the notification area to the bottom of the clock (lower right corner of the screen) often software called Synaptics is used... double-click on the icon to access the options and settings where some adjustments might help.

  It is possible that the video drivers must be updated and some kind of malware is the cause then be sure to check your pc with your AV program possible.