CISCO RV180 - limited VPN access

Similar Questions

• Issue of Cisco AnyConnect VPN access

  We have configured a Cisco ASA 5505 with access AnyConnect.  It works very well.  However, these users can't ping on the private network devices.  We have configured all devices on the network with an address 10.10.10.0/24 space.  The inside interface of the ASA I 10.10.10.1/24 and the VPN return addresses are 10.10.10.50 - 10.10.10.65/24.

  They users can use SSH and Oracle or MySQL calls but can't ping.   Obviously, I'm looking for something.

  Thank you.

  Dwane

  Hi Sylvie,.

  Most likely, your ASA missing no. - nat between inside the interface and remote vpn-pool address range.

  Quick Trobule shooting, thanks for posting your config and do not forget to remove the config security information.

  What version of your ASA?

  Thank you

  Rizwan James

• CISCO RV180 - basic steps for Site to Site

  Nice day!

  Can I ask about the basic steps of creating a VPN tunnel between two routers CISCO RV180. I'm trying to connect two remote local networks located in two different cities. A network has a Web server that could be accessed only at the local level. I would like to B network users access to this server. The RV180 router located on network B might be a RV180 VPN clinet located at the network has? Or both must be gateways? If network B has no external IP address is that a problem? I need to create users for this connection or only IKE and VPN strategy?

  Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

  It is a question of comon. Here is a document that should help you to configure the tunnel.

  For best results, I would use both routers as an access point, and both must have external IP addresses. If you make a VPN between the two RV180s tunnel, you don't have to create users. Just policies.

  Please let me know how you do.

  Thank you

  Eric Moyers. : | :. : | :.

  Cisco Small Business U.S. STAC Advanced Support Engineer

  Expert on wireless

  CCNA, CCNA-wireless

  * Please rate the Post so other will know when an answer has been found.

• Pass Cisco 871 and VPN to the SBS 2008 Server

  to precede the questions below, I'm responsible for COMPUTING internal with several years of site / offsite support. I also have very limited knowledge of the inner workings of a Cisco device. That said, I've beaten my head against a wall, trying to configure my router Cisco 871 to allow access to our internal server of SBS 2008 VPN hosting services. I think I, and properly configured the SBS 2008 Server.

  I use advanced IP services, version 12.4 (4) T7

  Here is the \windows\system32\conifg\system running

  Building configuration...

  Current configuration: 9414 bytes
  !
  version 12.4
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  encryption password service
  sequence numbers service
  !
  hostname yourname
  !
  boot-start-marker
  boot-end-marker
  !
  Security of authentication failure rate 3 log
  Passwords security min-length 6
  logging buffered debugging 51200
  recording console critical
  enable secret 5 *.

  !
  No aaa new-model
  !
  resources policy
  !
  PCTime-5 timezone clock
  PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
  IP subnet zero
  no ip source route
  IP cef
  !
  !
  !
  !
  synwait-time of tcp IP 10
  no ip bootp Server
  "yourdomain.com" of the IP domain name
  name of the IP-server 65.24.0.168
  name of the IP-server 65.24.0.196
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  inspect the IP name DEFAULT100 appfw DEFAULT100
  inspect the IP name DEFAULT100 cuseeme
  inspect the IP name DEFAULT100 ftp
  inspect the IP h323 DEFAULT100 name
  inspect the IP icmp DEFAULT100 name
  inspect the IP name DEFAULT100 netshow
  inspect the IP rcmd DEFAULT100 name
  inspect the IP name DEFAULT100 realaudio
  inspect the name DEFAULT100 rtsp IP
  inspect the IP name DEFAULT100 sqlnet
  inspect the name DEFAULT100 streamworks IP
  inspect the name DEFAULT100 tftp IP
  inspect the IP udp DEFAULT100 name
  inspect the name DEFAULT100 vdolive IP
  inspect the name DEFAULT100 http urlfilter IP
  inspect the IP router-traffic tcp name DEFAULT100
  inspect the IP name DEFAULT100 https
  inspect the IP dns DEFAULT100 name
  urlfilter IP interface-source FastEthernet4
  property intellectual urlfilter allow mode on
  urlfilter exclusive-area IP Deny. Facebook.com
  refuse the urlfilter exclusive-domain IP. spicetv.com
  refuse the urlfilter exclusive-domain IP. AddictingGames.com
  urlfilter exclusive-area IP Deny. Disney.com
  urlfilter exclusive-area IP Deny. Fest
  refuse the urlfilter exclusive-domain IP. freeonlinegames.com
  refuse the urlfilter exclusive-domain IP. hallpass.com
  urlfilter exclusive-area IP Deny. CollegeHumor.com
  refuse the urlfilter exclusive-domain IP. benmaller.com
  refuse the urlfilter exclusive-domain IP. gamegecko.com
  refuse the urlfilter exclusive-domain IP. ArmorGames.com
  urlfilter exclusive-area IP Deny. MySpace.com
  refuse the urlfilter exclusive-domain IP. Webkinz.com
  refuse the urlfilter exclusive-domain IP. playnow3dgames.com
  refuse the urlfilter exclusive-domain IP. ringtonemecca.com
  refuse the urlfilter exclusive-domain IP. smashingames.com
  urlfilter exclusive-area IP Deny. Playboy.com
  refuse the urlfilter exclusive-domain IP. pokemoncrater.com
  refuse the urlfilter exclusive-domain IP. freshnewgames.com
  refuse the urlfilter exclusive-domain IP. Toontown.com
  urlfilter exclusive-area IP Deny .online-Funny - Games.com
  urlfilter exclusive-area IP Deny. ClubPenguin.com
  refuse the urlfilter exclusive-domain IP. hollywoodtuna.com
  refuse the urlfilter exclusive-domain IP. andkon.com
  urlfilter exclusive-area IP Deny. rivals.com
  refuse the urlfilter exclusive-domain IP. moregamers.com
  !
  policy-name appfw DEFAULT100
  http request
  port-bad use p2p action reset alarm
  port-abuse im action reset alarm
  Yahoo im application
  default action reset service
  service-chat action reset
  Server deny name scs.msg.yahoo.com
  Server deny name scsa.msg.yahoo.com
  Server deny name scsb.msg.yahoo.com
  Server deny name scsc.msg.yahoo.com
  Server deny name scsd.msg.yahoo.com
  Server deny name messenger.yahoo.com
  Server deny name cs16.msg.dcn.yahoo.com
  Server deny name cs19.msg.dcn.yahoo.com
  Server deny name cs42.msg.dcn.yahoo.com
  Server deny name cs53.msg.dcn.yahoo.com
  Server deny name cs54.msg.dcn.yahoo.com
  Server deny name ads1.vip.scd.yahoo.com
  Server deny name radio1.launch.vip.dal.yahoo.com
  Server deny name in1.msg.vip.re2.yahoo.com
  Server deny name data1.my.vip.sc5.yahoo.com
  Server deny name address1.pim.vip.mud.yahoo.com
  Server deny name edit.messenger.yahoo.com
  Server deny name http.pager.yahoo.com
  Server deny name privacy.yahoo.com
  Server deny name csa.yahoo.com
  Server deny name csb.yahoo.com
  Server deny name csc.yahoo.com
  audit stop trail
  aol im application
  default action reset service
  service-chat action reset
  Server deny name login.oscar.aol.com
  Server deny name toc.oscar.aol.com
  Server deny name oam - d09a.blue.aol.com
  audit stop trail
  !
  !
  Crypto pki trustpoint TP-self-signed-1955428496
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1955428496
  revocation checking no
  rsakeypair TP-self-signed-1955428496
  !
  !
  TP-self-signed-1955428496 crypto pki certificate chain
  certificate self-signed 01
  308201B 8 A0030201 02020101 3082024F 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
  69666963 31393535 34323834 6174652D 3936301E 170 3032 30333031 30303035
  33315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 39353534 65642D
  32383439 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
  8100CB6B E980F044 5FFD1DAE CBD35DE8 E3BE2592 DF0B2882 2F522195 4583FA03
  40F4DAC6 CEAD479F A92607D4 1 B 033714 51C3A84D EA837959 F5FC6508 4D71F8E6
  5B124BB3 31F0499F B0E871DB AF354991 7D45F180 5D8EE435 77C8455D 2E46DE46
  67791F49 44407497 DD911CB7 593E121A 0892DF33 3234CF19 B2AE0FFD 36A640DC
  2 010001 HAS 3 990203 AND 77307530 1 130101 FF040530 030101FF 30220603 0F060355 D
  1104 1B 301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D 551D
  301F0603 C 551 2304 18301680 145566 4581F9CD 7 5F1A49FB 49AC9EC4 678908FF
  2A301D06 04160414 5566 745 81F9CD5F 1A49FB49 AC9EC467 8908FF2A 03551D0E
  300 D 0609 2A 864886 818100B 3 04050003 903F5FF8 A2199E9E EA8CDA5D F70D0101
  60B2E125 AA3E511A C312CC4F 0130563F 28D3C813 99022966 664D52FA AB1AA0EE
  9A5C4823 6B19EAB1 7ACDA55F 6CEC4F83 5292 HAS 867 BFC65DAD A2391400 DA12860B
  5A 523033 E6128892 B9BE68E9 73BF159A 28D47EA7 76E19CC9 59576CF0 AF3DDFD1
  3CCF96FF EB5EB4C9 08366F8F FEC944CA 248AC7
  quit smoking
  secret of username admin privilege 15 5 *.

  !
  !
  Policy-map sdmappfwp2p_DEFAULT100
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  Description $$$ FW_OUTSIDE$ $ES_WAN$ ETH - WAN
  address IP dhcp client id FastEthernet4
  IP access-group 101 in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  inspect the DEFAULT100 over IP
  IP virtual-reassembly
  route IP cache flow
  automatic duplex
  automatic speed
  sdmappfwp2p_DEFAULT100 of service-policy input
  out of service-policy sdmappfwp2p_DEFAULT100
  !
  interface Vlan1
  Description $ETH - SW - LAUNCH$ $INTF - INFO - HWIC-$4ESW $ES_LAN$ $FW_INSIDE$
  the IP 192.168.0.1 255.255.255.0
  IP access-group 100 to
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP nat inside
  IP virtual-reassembly
  route IP cache flow
  IP tcp adjust-mss 1452
  !
  IP classless
  !
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  the IP nat inside source 1 list the interface FastEthernet4 overload
  IP nat inside source static tcp 192.168.0.100 1723 1723 interface FastEthernet4
  IP nat inside source static tcp 192.168.0.100 25 25 FastEthernet4 interface
  IP nat inside source static tcp interface 192.168.0.100 80 80 FastEthernet4
  IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 443 443
  IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 987 987
  !
  recording of debug trap
  Note access-list 1 INSIDE_IF = Vlan1
  Remark SDM_ACL category of access list 1 = 2
  access-list 1 permit 192.168.0.0 0.0.0.255
  access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
  Access-list 100 = 1 SDM_ACL category note
  access-list 100 deny ip 255.255.255.255 host everything
  access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
  access ip-list 100 permit a whole
  access list 101 remark self-generated by the configuration of the firewall Cisco SDM Express
  Note access-list 101 = 1 SDM_ACL category
  access-list 101 permit tcp any any eq 1723
  access-list 101 permit tcp any any eq 987
  access-list 101 permit tcp any any eq 443
  access-list 101 permit tcp any any eq www
  access-list 101 permit tcp any any eq smtp
  access-list 101 permit udp host 65.24.0.169 eq field all
  access-list 101 permit udp host 65.24.0.168 eq field all
  access-list 101 permit udp host 24.29.1.219 eq field all
  access-list 101 permit udp host 24.29.1.218 eq field all
  access-list 101 permit udp any eq bootps any eq bootpc
  access-list 101 deny ip 192.168.0.0 0.0.0.255 any
  access-list 101 permit icmp any any echo response
  access-list 101 permit icmp any one time exceed
  access-list 101 permit everything all unreachable icmp
  access-list 101 deny ip 10.0.0.0 0.255.255.255 everything
  access-list 101 deny ip 172.16.0.0 0.15.255.255 all
  access-list 101 deny ip 192.168.0.0 0.0.255.255 everything
  access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
  access-list 101 deny ip 255.255.255.255 host everything
  access-list 101 deny ip any one
  not run cdp
  !
  !
  control plan
  !
  connection of the banner ^ CCCCCAuthorized access only!
  Unplug IMMEDIATELY if you are not an authorized user. ^ C
  !
  Line con 0
  local connection
  no activation of the modem
  telnet output transport
  line to 0
  local connection
  telnet output transport
  line vty 0 4
  privilege level 15
  local connection
  transport input telnet ssh
  !
  max-task-time 5000 Planner
  Scheduler allocate 4000 1000
  Scheduler interval 500
  end

  All that top has been configured with the SDM interface. I hope someone here can take a look at this and see what my question is, and why I can't connect through the router.

  All thanks in advance to help me with this.

  Jason

  Based on your description, I am assuming that you are trying the traffic PPTP passthrough via the router 871, and the PPTP Protocol ends on your SBS 2008 Server.

  If this is the correct assumption, PPTP uses 2 protocols: TCP/1723 and GRE. Your configuration only allow TCP/1723, but not the GRE protocol.

  On 101 ACL, you must add "allow accord any any" before the declarations of refusal:

  101 extended IP access list

  1 allow any one

  I guess that the PPTP control connection works fine? Are you able to telnet to the router outside the ip address of the interface on port 1723?

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• Cisco and Checkpoint VPN clients on a single PC

  Hello

  I'm in the following fix:

  I had used customer Checkpoint SecuRemote 4.1 SP - 5 VPN in the past.

  Now, I have installed the Cisco VPN client version 4.0.4 on my PC to access IPSec VPN for the PIX in our headquarters.

  According to Cisco VPN release notes http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/rel404/404clnt.htm#wp1346340 , it should be possible to have clients both Cisco and Checkpoint VPN installed on the same machine.

  But I am not able to connect to my PIX, I receive the following error message:

  "Secure the complete VPN connection locally by the Client.

  Reason 403: failed to contact the security gateway. »

  When I'm looking for signs of PC control-> system-> hardware-> device Administration-> network cards, I can see Cisco Systems VPN Adapter disabled.

  After you activate manually, I always get the same error when you try to connect to the Cisco VPN client.

  After PC restart the Cisco VPN adapter is disabled later.

  I tried to uncheck Check Point SecuRemote form my Dial-up connection (bypassing CSCea31192 of bug, but the bug does not affect NAT - T connection which I use).

  I noticed the same situation on three different computers, one running Windows XP, both running Windows 2000.

  After uninstalling the client Checkpoint completely (including Windows registry manual removal), the Cisco VPN client works very well.

  It seems to me, therefore, that there is a profound mismatch between Cisco and Checkpoint VPN clients.

  Does anyone know of a workaround?

  Thank you

  Milan

  We had the same problem with some of our users who need to use the two clients to connect to customer sites.

  If I remember the cisco client does not start automatically, but the client of checkpoint 4.1 don't.

  We by-passed by deleting the registry entry point control that starts the client at startup. fwenc.exe is the entrance and it is in

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  After that make a shortcut to the executable file that is stored in the directory \bin to relevant checkpoint on the client (it is different from NT & 9 client x) and then only start when it is necessary.

  Hope that's a help

• WebVPN and remote VPN access

  Hello

  Is there a difference between WebVPN and remote VPN access or they are the same.

  Thank you.

  access remote vpn consists of

  -IPSEC VPN remote access. It is part of the ASA, no permit required, requires pre-installed Client from Cisco VPN IPSEC on PC

  -with AnyConnect SSL VPN remote access. It requires licensing of SSL VPN on SAA. AnyConnect client can be installed automatically on the PC with the launch of web.

  -with Essentials AnyConnect SSL VPN remote access. Beginning with ASA 8.2 (1), almost license $ 0. It's the same AnyConnect client as in the previous article, but it cannot be installed automatically with the launch of web. It must be previously installed as of Cisco IPSEC VPN client.

  -webvpn aka clientless vpn. It is a portal HTTPS which allows HTTP connections, file sharing, telnet, RDP and much more (with smart tunnels) resources without having to install a real client on the PC. It requires licensing of SSL VPN on SAA. It cannot be used if "AnyConnect Essentials" license is activated on SAA after 8.2 (1)

  Kind regards

  Roman

• SRP526W to transmit or provide VPN access to clients

  Hello

  We have a SRP526W here, which replaced a cheap, simple router. Now, we would like to set up VPN access for outside clients again. So far, this was done by sending PPTP (TCP 1723 and GRE) for the Routing and Windows 2000 RAS server within the network.

  According to this post SRP521W, and therefore I guess so the SRP526W, are not able to pass the GRE: https://supportforums.cisco.com/thread/2093204

  Is it possible to provide external client VPN access with this router? Perhaps with L2TP (but then you should transmit ESP) or IPSec (ESP and AH as far as I know)?

  If there is no solution, we need to replace this device again once with a cheap, simple, router that is able to convey the Grateful - as you can imagine, we would like to save this shame Cisco.

  Kind regards

  Dominik

  Hello Dominik,

  The SRP520 only supports IPSec site-to-site at this time.

  Advancements are made, please check in the new year.

  Andy

• Remote VPN access - add new internal IP address

  Hello

  I have an existing configuration of Cisco VPN client in ASA 5510 for remote access.

  -------------------------------------

  Name of the Group: ISETANLOT10

  Group password: xxxx
   
  IP pool: lot10ippool, 172.27.17.240 - 172.27.17.245
   
  enycrption: 3DES
  authentication: SHA
  ------------------------------------
  the connection was successful, and I was able to ping to the internal server 172.47.1.10.
  Now, there is demand for remote access VPN even can do a ping to access a new server within LAN, 172.57.1.10 & 172.57.1.20
  But with the same VPN access, I was unable to ping the two new IP.
  How can I add both IP in order to make a ping by using the same configuration of remote access VPN?
  I have attached below existing config (edited version)
   
  ===

  : Saved
  :
  ASA Version 8.0 (4)
  !
  hostname asalot10
  names of
  name 172.17.100.22 NAVNew
  name 172.27.17.215 NECUser
  172.47.1.10 NarayaServer description Naraya server name
  name 62.80.122.172 NarayaTelco1
  name 62.80.122.178 NarayaTelco2
  name 172.57.1.10 IPVSSvr IPVSSvr description
  name 122.152.181.147 Japan01
  name 122.152.181.0 Japan02
  name 175.139.156.174 Outside_Int
  name 178.248.228.121 NarayaTelco3
  name 172.67.1.0 VCGroup
  name 172.57.1.20 IPVSSvr2
  !
  object-group service NECareService
  Description NECareService remote
  the eq https tcp service object
  EQ-ssh tcp service object
  response to echo icmp service object
  inside_access_in deny ip extended access list all Japan02 255.255.255.0
  inside_access_in ip VCGroup 255.255.255.0 allowed extended access list all
  inside_access_in list extended access deny tcp object-group PermitInternet any object-group torrent1
  inside_access_in list extended access allowed object-group ip PermitInternet any newspaper disable
  inside_access_in list any newspaper disable extended access allowed host ip NarayaServer
  inside_access_in list extended access permit ip host IPVSSvr all
  inside_access_in list any newspaper disable extended access allowed host ip NAVNew
  inside_access_in list extended access permit ip host 172.17.100.30 all
  outside_access_in list extended access allow object-group objects NECare a NECareService-group
  outside_access_in list extended access allowed host ip DM_INLINE_NETWORK_1 NarayaServer object-group
  outsidein list extended access permit tcp any host Outside_Int eq https
  outsidein list extended access allowed object-group rdp any host Outside_Int debug log
  outsidein list extended access allowed host tcp object-group DM_INLINE_NETWORK_2 eq Outside_Int 8080
  outsidein list extended access allowed host ip DM_INLINE_NETWORK_3 IPVSSvr object-group
  inside_mpc list extended access allowed object-group TCPUDP any any eq www
  inside_mpc list extended access permit tcp any any eq www
  inside_nat0_outbound list of allowed ip extended access all 172.27.17.240 255.255.255.248
  inside_nat0_outbound list extended access permit ip host NarayaServer Nry_Png object-group
  inside_nat0_outbound list extended access allowed host ip IPVSSvr2 172.27.17.240 255.255.255.248
  outside_cryptomap list extended access permitted ip object-group Naraya_Png-group of objects Nry_Png

  Global interface 10 (external)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 10 0.0.0.0 0.0.0.0
  static (inside, outside) interface tcp 8080 8080 NarayaServer netmask 255.255.255.255
  static (inside, outside) tcp 3389 3389 NAVNew netmask 255.255.255.255 interface
  public static tcp (indoor, outdoor) interface ssh IPVSSvr2 ssh netmask 255.255.255.255
  Access-group outsidein in external interface
  inside_access_in access to the interface inside group
  Route outside 0.0.0.0 0.0.0.0 175.139.156.173 1
  Route inside 172.17.100.20 255.255.255.255 172.27.17.100 1
  Route inside NAVNew 255.255.255.255 172.27.17.100 1
  Route inside 172.17.100.30 255.255.255.255 172.27.17.100 1
  Route inside NarayaServer 255.255.255.255 172.27.17.100 1
  Route inside 172.47.1.11 255.255.255.255 172.27.17.100 1

  
  Route inside VCGroup 255.255.255.0 172.27.17.100 1

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
  cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set 218.x.x.105 counterpart
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  outside_map map 1 lifetime of security association set seconds 28800 crypto
  card crypto outside_map 1 set security-association life kilobytes 4608000
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400

  internal ISETANLOT10 group policy
  ISETANLOT10 group policy attributes
  value of server DNS 172.27.17.100
  Protocol-tunnel-VPN IPSec l2tp ipsec
  username, password nectier3 dPFBFnrViJi/LGbT encrypted privilege 0
  username nectier3 attributes
  VPN-group-policy ISETANLOT10
  username password necare encrypted BkPn6VQ0VwTy7MY7 privilege 0
  necare attributes username
  VPN-group-policy ISETANLOT10
  naraya pcGKDau9jtKgFWSc encrypted password username
  naraya attribute username
  VPN-group-policy ISETANLOT10
  type of nas-prompt service
  type tunnel-group ISETANLOT10 remote access
  attributes global-tunnel-group ISETANLOT10
  address lot10ippool pool
  Group Policy - by default-ISETANLOT10
  IPSec-attributes tunnel-group ISETANLOT10
  pre-shared-key *.
  tunnel-group 218.x.x.105 type ipsec-l2l
  218.x.x.105 group of tunnel ipsec-attributes
  pre-shared-key *.
  type tunnel-group ivmstunnel remote access
  tunnel-group ivmstunnel General-attributes
  address lot10ippool pool
  ivmstunnel group of tunnel ipsec-attributes
  pre-shared-key *.
  !

  =====

  Remote VPN access must allow the connection, but I'm guessing that your ASA does not know how to get to the two new destinations.

  You have a name and a static route to the job to 172.47.1.10 Server:

  name 172.47.1.10 NarayaServer description Naraya Server

  route inside NarayaServer 255.255.255.255 172.27.17.100 1

  .. but no equivalent for the two new hosts. As a result, all traffic of ASA destiny for them will attempt to use the default route (via the external interface).

  If you add:

  route inside 172.57.1.10 255.255.255.255 172.27.17.100

  route inside 172.57.1.20 255.255.255.255 172.27.17.100

  (assuming this is your correct entry), it should work.

• Cisco AnyConnect SSL VPN

  Hi guys,.

  I am currently ut setting for the first time on a Cisco ASA 5505 Cisco AnyConnect SSL VPN.

  I enclose my topology.

  I ran the wizard of the ASDM on the ASA2 I want to use for my VPN connections.

  Everything works fine except that I can't access any internal computer servers on my network.

  I do a specific configuration because my servers have a different default gateway of the ASA that I use for my VPN?

  I have since the ASA2 the 192.168.10.0 network.

  my remote ip address of the pool is 10.0.0.1-10.0.0.10/24

  config (I've included what, in my view, is necessary, please let me know if you need to see more):

  ASA 2.0000 Version 8

  Sysopt connection permit VPN

  tunnel of splitting allowed access list standard 192.168.10.0 255.255.255.0

  network of the NETWORK_OBJ_10.0.0.0 object

  10.0.0.0 subnet 255.255.255.0

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.0.0.0 NETWORK_OBJ_10.0.0.0 non-proxy-arp-search to itinerary

  internal GroupPolicy_vpn group strategy

  attributes of Group Policy GroupPolicy_vpn

  value of 192.168.10.20 WINS server

  value of server DNS 192.168.10.15

  client ssl-VPN-tunnel-Protocol ikev2

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunnel

  domain.local value by default-field

  WebVPN

  User PROFILE of value type profiles AnyConnect

  type tunnel-group tunnel_vpn remote access

  tunnel-group tunnel_vpn General-attributes

  address ra_vpn_pool pool

  Group Policy - by default-GroupPolicy_vpn

  tunnel-group tunnel_vpn webvpn-attributes

  activation of the Group tunnel_vpn alias

  !

  Thanks in advance!

  Hello

  The unit behind your ASAs on the internal LAN should really be a router switch or L3 and not a basic L2 switch.

  You now have an asymmetric routing on your network, and this is the reason why the connection of the VPN device will not work.

  The problem comes from the fact that internal devices use the ASA1 for the default gateway. When trying to connect to the VPN Client, the following happens

  • Client VPN armed sends TCP SYN that happens by the VPN with the ASA2
  • ASA2 passes the TCP SYN to the server
  • Server responds with TCP SYN ACK for the VPN Client and sends this information to the ASA1 as the destination host is in another network (vpn pool)
  • ASA1 sees the TCP SYN ACK, but never saw the TCP SYN so he abandoned the connection.

  To work around the problem, you need to essentially configure TCP State Bypass on the ASA1 although I wouldn't really say that, but rather to change the configuration of the network so that traffic makes this way to start.

  An option, even if not the best, would be to set the LAN of the ASA2 to ASA1 on some physical ports and set up a new network connection between them (not the same 192.168.10.x/yy). In this way the ASA1 would see the entire conversation between servers and VPN Clients and there are no problems with the flow of traffic.

  But as I said it probably still isn't the best solution, but in my opinion better than having recourse to special configurations ASA1.

  There could be a 'special' configuration on the ASA2 that you could use to make the Client VPN connections operate in their current configuration, without changing anything in the physical topology.

  You can change the NAT for VPN Clients configuration so that the VPN ALL users would actually PATed to 192.168.10.4 IP address when they connect to your internal network. Given that the server would see the connection coming from the same network segment, they would know to forward traffic back with the ASA2 rather than ASA1 like her today.

  If this is not an ideal solution.

  No source (indoor, outdoor) nat static any any static destination NETWORK_OBJ_10.0.0.0 NETWORK_OBJ_10.0.0.0 non-proxy-arp-search to itinerary

  the object of the LAN network

  192.168.10.0 subnet 255.255.255.0

  NAT (exterior, Interior) 1 dynamic source NETWORK_OBJ_10.0.0.0 destination static LAN LAN interface

  Hope this helps

  -Jouni

• Wacky VPN access problem of ASA

  Hi people,

  I am currenty a situation, and I am in real need of advice...

  The situation is that, if ASA helps my remote branches to access my home network and its allowing people to visit Internet inside, its not allowing the remote VPN client VPN access... R V to aid VPN client version of Cisco 4.6...

  See a presentation of basic network that illustrates our network and configuration of the ASA...

  Advice to solve this problem will be greatly appreciated...

  Kind regards

  Noman Bari

  I see what rou are... Please see my attchement...

  Please rate if it helps!

• Cisco ASA 5510 VPN Site to Site with Sonicwall

  I am trying to configure a tunnel between a Cisco ASA 5510 VPN (Version 8.2 (2)) and TZ200 Sonicwall. I rose tunnel and go and I am able to ping the internal IP address of Cisco ASA of the Sonicwall LAN but nothing work. When I try to ping a host behind the Cisco ASA of the Sonicwall LAN I get the following message "rules asymmetrical NAT matched for flows forward and backward; Connection for tcp src outside:10.20.10.x/xxxx dst inside:10.20.2.x/xxxx refused due to failure of reverse path of NAT"on the SAA

  Googling the error above shows the problems with version 8.3 or later that resembled the nat commands have been changed SAA, train is still on 8.2 but I another common question does not add an exemption of NAT I have double-triple checked that I did add an exception rule of NAT of the hosts on the network from cisco for the guests of the Sonicwall network. Looks like I hit a road block so any help would be appreciated. Thank you

  Here are a few excertps of the config file (10.20.2.0 behind the cisco) and 10.20.10.0 behind the sonicwall

  NAT (inside) 0 access-list sheep

  ..

  IP 10.20.2.0 allow Access-list extended sheep 255.255.255.0 10.20.10.0 255.255.255.0

  access extensive list ip 10.20.2.0 outside_1_cryptomap allow 255.255.255.0 10.20.10.0 255.255.255.0

  ..

  card crypto outside_map 1 match address outside_1_cryptomap

  card crypto outside_map 1 set counterpart x.x.x.x

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  ..

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  lifetime 28800

  ..

  internal SiteToSitePolicy group strategy

  attributes of Group Policy SiteToSitePolicy

  VPN-idle-timeout no

  Protocol-tunnel-VPN IPSec

  Split-tunnel-network-list no

  ..

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group x.x.x.x General attributes

  Group Policy - by default-SiteToSitePolicy

  tunnel-group ipsec-attributes x.x.x.x

  pre-shared key *.

  ..

  Added some excerpts from the configuration file

  Hello Manjitriat,

  Okay, detected IPSEC parody is normal, that means you are trying to send unencrypted on a line of encrypted packets.

  Now, if you see on the plotter of package that traffic will hollow the VPN channel all its fine in your site.

  Now the packet tracer must be something like this:

  entrance to Packet-trace inside private_ip_lan destination_private_ip_lan 1025 tcp 80

  Please provide us with the result of the following instructions after you run the packet tracer.

  See the crypto Isakamp SA

  See the crypto Ipsec SA

  Kind regards

  Julio

• Only way ASA Vpn access

  Hello:

  I have configured ASA 5505 to acept Cisco VPN Clients on IP-SEC and access internal subnet of tuneling (added a rule exempt NAT too) and the VPN Clients can connect and work without problems.

  But no internal network or the ASA I can ping or conect to the VPN Clients.

  My configuration:

  Internal network: 172.26.1.0 255.255.255.0

  The VPN Clients network 172.26.2.0 255.255.255.0

  Can you help me?

  Here is my configuration:

  : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name ftf.es enable password xxxxxxx encrypted passwd xxxxx encrypted names name 217.125.44.23 IP_publica name 172.26.1.100 Servidor name 192.168.1.3 IP_externa name 192.168.2.3 IP_Externa2 name 172.26.2.0 VPN_Clients ! interface Vlan1 nameif inside security-level 100 ip address 172.26.1.89 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address IP_externa 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 switchport access vlan 12 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 13 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name ftf.es same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group service terminal-server tcp port-object eq 3389 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list FTFVPN_splitTunnelAcl standard permit 172.26.1.0 255.255.255.0 access-list FTFVPN_Group_splitTunnelAcl standard permit 172.26.1.0 255.255.255.0 access-list outside_access_in extended permit tcp any host IP_externa eq 3389 access-list outside_access_in extended permit object-group TCPUDP any host IP_externa eq www access-list FTF_ADSL2_splitTunnelAcl standard permit any access-list inside_nat0_outbound extended permit ip 172.26.1.0 255.255.255.0 VPN_Clients 255.255.255.0 access-list inside_nat0_outbound extended permit ip 172.26.1.0 255.255.255.0 host 172.26.1.199 access-list outside_nat0_outbound extended permit ip VPN_Clients 255.255.255.0 172.26.1.0 255.255.255.0 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool vpn 172.26.1.180-172.26.1.200 mask 255.255.255.0 ip local pool vpn2 172.26.2.100-172.26.2.200 mask 255.255.255.0 ip local pool vpn3 172.26.3.100-172.26.4.150 mask 255.255.255.0 ip local pool vpn4 172.26.1.240-172.26.1.250 mask 255.255.255.0 ip local pool FTFVPN_Pool 176.26.1.150-176.26.1.170 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 3389 Servidor 3389 netmask 255.255.255.255 static (inside,outside) tcp interface www Servidor www netmask 255.255.255.255 access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 172.26.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 40 set pfs group1 crypto dynamic-map outside_dyn_map 40 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 60 set pfs group1 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 80 set pfs group1 crypto dynamic-map outside_dyn_map 80 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 100 set pfs group1 crypto dynamic-map outside_dyn_map 100 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 120 set pfs group1 crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal  20 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 172.26.1.90-172.26.1.217 inside ! webvpn enable outside url-list FTFVLC "DYNAMICS" cifs://172.26.1.100 1 port-forward TEST 3389 172.26.1.100 3389 Terminal Server group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes banner value Bienvenido a la red de FTF dns-server value 172.26.1.100 80.58.32.97 vpn-tunnel-protocol IPSec l2tp-ipsec webvpn split-tunnel-policy tunnelall default-domain value ftf.es group-policy DfltGrpPolicy attributes banner none wins-server none dns-server none dhcp-network-scope none vpn-access-hours none vpn-simultaneous-logins 3 vpn-idle-timeout 30 vpn-session-timeout none vpn-filter none vpn-tunnel-protocol IPSec l2tp-ipsec webvpn password-storage disable ip-comp disable re-xauth disable group-lock none pfs disable ipsec-udp disable ipsec-udp-port 10000 split-tunnel-policy tunnelall split-tunnel-network-list none default-domain none split-dns none intercept-dhcp 255.255.255.255 disable secure-unit-authentication disable user-authentication disable user-authentication-idle-timeout 30 ip-phone-bypass disable leap-bypass disable nem disable backup-servers keep-client-config msie-proxy server none msie-proxy method no-modify msie-proxy except-list none msie-proxy local-bypass disable nac disable nac-sq-period 300 nac-reval-period 36000 nac-default-acl none address-pools value vpn2 smartcard-removal-disconnect enable client-firewall none client-access-rule none webvpn   functions url-entry   html-content-filter none   homepage none   keep-alive-ignore 4   http-comp gzip   filter none   url-list none   customization value DfltCustomization   port-forward value TEST   port-forward-name value Acceso a aplicaciones   sso-server none   deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information   svc none   svc keep-installer installed   svc keepalive none   svc rekey time none   svc rekey method none   svc dpd-interval client none   svc dpd-interval gateway none   svc compression deflate group-policy FTFVPN_Group internal group-policy FTFVPN_Group attributes dns-server value 172.26.1.100 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value FTFVPN_Group_splitTunnelAcl default-domain value ftf.es address-pools value vpn2 group-policy VPNSSL internal group-policy VPNSSL attributes vpn-tunnel-protocol IPSec l2tp-ipsec webvpn webvpn   functions url-entry file-access file-entry file-browsing mapi port-forward filter http-proxy auto-download citrix username raul password xxxxxx encrypted privilege 0 username raul attributes vpn-group-policy FTFVPN_Group tunnel-group DefaultRAGroup general-attributes address-pool vpn2 default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultWEBVPNGroup general-attributes default-group-policy VPNSSL tunnel-group DefaultWEBVPNGroup webvpn-attributes nbns-server Servidor master timeout 5 retry 3 tunnel-group FTFVPN_Group type ipsec-ra tunnel-group FTFVPN_Group general-attributes address-pool vpn2 default-group-policy FTFVPN_Group tunnel-group FTFVPN_Group ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect esmtp   inspect sqlnet   inspect skinny   inspect sunrpc   inspect xdmcp   inspect sip   inspect netbios   inspect tftp ! service-policy global_policy global prompt hostname context Cryptochecksum:f5e713652d4a2e2623248d7e49086105 : end asdm image disk0:/asdm-524.bin asdm location Servidor 255.255.255.255 inside asdm location IP_publica 255.255.255.255 inside asdm location IP_externa 255.255.255.255 inside asdm location IP_Externa2 255.255.255.255 inside asdm location VPN_Clients 255.255.255.0 inside no asdm history enable 

  Raul,

  I don't see to apply ACLs inside the interface or as vpn-filter that will prevent the PING of the SAA within the intellectual property to the VPN client.

  Are you sure that the VPN client does not have the Windows Firewall on or antivirus software that prevents to respond to PING?

  Federico.

• kb2726233 update is blocking my vpn access

  kb2736233 update is blocking my vpn access, the question of the activex control, Microsoft is there anything I can do other than do not take into account this update, or do not allow this update. Is a daily problem, have to remove every day.

  Hi mesbit8851,

  If the suggestions here have not solved the problem you are having, I suggest you to send your request in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Remote RDP client VPN access on ASA 5510

  Hello.

  We have configured the VPN tunnel from site of offshore to the location of the customer using ASA5510 and access to RDP to the location of the customer. Also been configured remote VPN access in offshore location. But using the remote VPN client, we are able to get the RDP of officeshore location but not able to access to the location of the RDP client. Are there any additional changes required?

  Thank you

  Hi Salsrinivas,

  so to summarize:

  the VPN client connects to the ASA offshore

  the VPN client can successfully RDP on a server at the offshore location

  the VPN client cannot NOT RDP on a server at the location of the customer

  offshore and the location of the customer are connected by a tunnel L2L

  (and between the 2 sites RDP works very well)

  is that correct?

  Things to check:

  -the vpn in the ACL crypto pool?

  -you're exemption nat for traffic between the vpn pool and 'customer' LAN? is the exemption outside (vpn clients are coming from the outside)?

  -you have "same-security-traffic permitted intra-interface" enabled (traffic will appear outside and go back outside)?

  If you need help more could you put a config (sterilized) Please?

  HTH
  Herbert