Cisco's C series server using direct connect to UCSM ping

Similar Questions

• See Security Server and direct connection

  I have a security server for my connections from the Internet. It works very well, accept when I activate "direct connection on the desktop. I found the following statement on this:

  If you bypass the secure connection, the client must establish a direct communication of RDP to the virtual machine desktop RDP (port 3389).

  That means I have to open 3389 (RDP) to the Internet if I want to use direct connections?

  If I disable the direct connections to get my security server doesn't work, I have to turn off on my login server. It is I understand that this means that if I reboot my connection to the server, all disconnected mode clients. Is there a way I can disable "Direct connections" to the Security Server, allowing access from the LAN?

  TIA.

  For a long time I had to face the problem then I hope I'm he transmit correctly.   Because you don't want to open 3389 to the internet, you must use indirect connections to the broker for users of security server connections.   This means that all connections made outside the LAN will be handled by the Security server.   If you need to restart the Security server that these connections were removed.   If you need to restart the broker to connect to security services server should not drop all connections, the external web page would become unavailable unless you also have internal customers using this broker for connections to how it would be mandated by the broker for connections and would be deleted.

  Simple solution is to have a dedicated connection, broker for the Security server that is configured in indirect mode and then have one or two brokers connection for internal users who are configured in direct connection mode.   As I have said for a long time I had to deal with this so please forgive me if I have nothing hidden.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• have 2 laptops, HP & Gateway, network, Comcast, completely wireless HP must use direct connect to the router? What has happened, how to fix.

  have a Comcast wireless connection. 2 laptop HP & Gateway, HP, leaving work wireless, must connect directly with a wire to the router, what happened? How to fix? Colleen

  Hi ColleenMiller,

  1. you receive messages or error codes when you connect?

  2 Windows operating system you are using?

  You can view the following items and see if it helps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• HTTPS connection to the server using the connection

  Hello! It is a part of my code to connect to a secure server.

  However, it is not show me if the connection has been connected. Is there something wrong with my code?

  ' Public Sub validateUser (String usernamelogin, String passwordlogin) throws IOException {}

  HttpsConnection httpConn = null;
  String url = "https://myserverpage/login?";
  InputStream is = null;
  OutputStream os = null;
      
  Cookie string ="";
  Params string;
  params = 'name =' + usernamelogin;
  params += "& password =" + passwordlogin.replace (' ', '+');

  try {}
  Open an HTTPs connection object
  httpConn = (HttpsConnection) Connector.open (url + params);
  Setup HTTP POST request
  httpConn.setRequestMethod (HttpsConnection.POST);

  httpConn.setRequestProperty ("Cookie", cookie);
  httpConn.setRequestProperty ("Accept_Language", "en-US");
  Content-Type is essential to pass parameters in a POST request
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
        
        
        
  httpConn.setRequestProperty ("name", usernamelogin);
  httpConn.setRequestProperty ("password", passwordlogin);
        
  secure https
  If SecurityInfo = httpConn.getSecurityInfo ();
  Certificate c = si.getServerCertificate ();
  Object String = c.getSubject ();

  This function retrieves this connection information
  getConnectionInformation (httpConn);

  OS = httpConn.openOutputStream ();

  OS. Write (params. GetBytes());

  / * ATTENTION: os.flush () is controversial. It can create unexpected behavior
  on some mobile devices. Try it for your mobile device * /.

  OS. Flush();

  Read the response from the server

  StringBuffer sb = new StringBuffer();
  is = httpConn.openDataInputStream ();
  int chr;
  While ((chr = is.read (())! = - 1).
  SB. Append ((Char) chr);

  Web server returns only
  System.out.println (usernamelogin + "is connected" + sb.toString ());

  } {Finally
  If (is! = null)
  is. Close();
  If (OS! = null)
  OS. Close();
  If (httpConn! = null)
  httpConn.close ();
  }

  }

  The fact of this aid.

  http://supportforums.BlackBerry.com/T5/Java-development/implement-basic-HTTP-authentication/Ta-p/445...

• How to store messages on my computer and at the same time to delete them on the server using IMAP connection?

  I have 100 MB space on the server. I have 1 TB of space on my computer. I want to delete the messages from the server while keeping a copy on my computer. Please tell me that this is possible and instruct me on how to do it. I am using IMAP.

  Thanks for your help.

  You use unified folders view? One of the reasons that I do not use it is that it can count.

• C3160 Direct connect support?

  Hi, I have trouble finding anywhere that will give me a confirmed answer on this.

  I would like to know if a server with Vic 1227 C3160 supports direct connect mode in the fi.

  Thank you very much

  Hi Anthony,.

  If you refer to the data sheet below:

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c/HW/C3160/in...

  "Currently, the Cisco UCS C3160 server runs in stand-alone mode only. Integration of Cisco's UCS is not supported. »

  This means that the C-series server cannot be connected to the interconnection of fabric. Here is a guide on the integration of the server of the C series:

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/c-series_inte...

  "Cisco UCS Manager 2.2 supports an option to connect the CSeries Rack - Mount Server directly on the fabric of interconnections. You don't need fabric Extenders. This option allows to Cisco UCS Manager to manage servers mounted in series Rack C using a single cable for management traffic and data traffic. "

  Given that integration is not supported this feature will be unavailable.

  I hope this helps, please check the answers as well as others may find useful messages accurately.

  Qiese Sa'di

• Direct Connect with GPS or other active data

  I'm testing the possibility of using the functionality of direct connection to and from a phone while accessing other critical mission for my work tasks. We require the use of a tracking application that captures and sends GPS coordinates to a server via a data connection and also to connect to work through tasks via a web browser application. Direct connection cannot be launched on the phone while the user has any running application that uses data, it seems. It will work when the tracking application is closed and that the browser is slow and not loading pages, but doesn't if the browser will load a new page, the GPS application is running or even just Google maps. Can you get it someone please let me know if the i1 should be able to use Direct Connect when using other services that use data? I have been informed by Sprint that it is possible (two other applications can run on the data at the same time). The phone lacks a voice, only data plan.

  No, you can't. If something is using data on an iDEN connection, that's all. That's all it will do. It's just the nature of identity. If you want a phone that will have voice and data communications at the same time, you need to use CDMA or GSM.

• "Direct connection to the desktop" and external clients

  Hi all

  I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

  I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

  my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

  When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

  TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

  any ideas?

  Thank you

  Ming

  In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Connecting two cisco ESW 500 series switches.

  Hi Experts,

  I have a basic knowledge of the network and need help.

  I have two switches cisco ESW 500 series and I want to connect with each other.

  Q1 # what type of cable should I use to connect these two CrossOver switches or fiber... What is the advantage of the use of fiber on CrossOver. ?

  Q2 # what are the ports marked in the image used to...?

  

  Hi tech spec.

  You can use copper or fiber. You can use directly through crossover is not necessary. Fiber is generally more reliable, can offer a higher flow and distances much longer if needed. You will need to buy SFP modules to connect the fiber switches, which is an added expense.

  The ports on the right are shared. If you plug a FPS in the far-right for the fiber port, then the port to the left of it becomes idle. Only port copper or SFP port can be used at the same time. In addition, these ports are usually used for the uplink to another switch or router.

  Please mark this thread as answer or reply if you have any additional questions.

  -Marty

• HP OfficeJet 200 series Mobile: 3 Surface Pro WIndows 10 - can't re eastablish wi - fi direct connection

  Hello

  We managed to connect our Surface Pro 3 Windows 10 running on a mobile printers HP OfficeJet 200 series using a Wi - Fi Direct connection not wireless. The problem is that whenever we turn the printer off or go to sleep Surface pro cannot re esatablish of connection with the printer again after on. In the device and printers OfficeJet 200 is still there but greyed out and has a status to be offline even if the printer has been for a while.

  The only way to connect it must make the entire process of reconnection to the Wi - Fi direct connection, for example by typing in the code and wait to see the device is connected. It should not this printer to establish a connection with the surface pro automatically after power on, yet the pro Surface shows that the printer is offline and I know that I had direct Wi - Fi together to establish the connection automatically. Is there a solution for this.

  The problem only occurs when the printer stops and he must turn it off to save battery because what get out us them for field work.

  We discovered that the Wi - Fi Direct is not fully supported in Windows 10. The only way you can reconnect to Wi - Fi direct is if you connect to the printer that you connect to an access point Wi - Fi. If you do this your Wi - Fi direct printer connection will be reset. The downside is that your Surface Pro 3 will lose the internet connection.

  For us, that our solution is not to use Wi - Fi direct and use the Wi - Fi function. We connected the mobile series HP OfficeJet 200 to our iPhone hot spot and we also connected the Surface Pro iPhone hotspot. Whenever we connect our tablet to the hotspot, we can use the printer because the printer is always connected to the HotSpot.

• Update Windows using the two direct connection to proxy nd

  Use the two nd direct net connection by proxy, more time via proxy, is there a way I can configure update without changing the settings?

  am on windows 7 Home premium

  Please correct me if wrong, using "netsh winhttp import proxy IE" it says you can update via proxy, passing 'autamatically detected settings' proxy servers, will be here all the problems and errors in its conclusion/search for updates (does not search for updates error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000")?

  Asked me to do this update of proxy (windows security essentials)

  The open command prompt window. [In Vista and Windows 7 you need to open the prompt as Administrator]

  2. type of this syntax: NETSH WINHTTP PROXY DEFINED (Insert here the number and proxy server) and press ENTER.

  Example: NETSH WINHTTP SET PROXY 1.1.1.1:8080
                         OR: NETSH WINHTTP SET MYPROXY .NET PROXY: 8080

  If his point is it normal that windows update as well as the WSE update fails with direct connection?

  happened with me with error msg error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000"

  If the details of my proxy are 192.168.0.1 port 3128, which is the entrance to the command line...

  I had to reset the connection parameters using winhttp reset to retrieve the update in direct connection to the network

  Please give me a good solution with this

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072ee20x80072EE7; 0xC80003FA 0X8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?

  Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?

  I have (2) AIR-SAP2602I-A-K9, configured the same way.

  on two different remote LANs.

  They don't seem to be handing out addresses via DHCP.

  {If I connect to a local network with another DHCP server}

  wireless devices can obtain addresses

  This another DHCP server on the LAN through the access point.}

  I followed 12.4.25d. JA.cg.pdf

  Configuration of the Access Point to provide the Service DHCP 5-22

  ---------|---------|---------|

  e.g. 3444-RCS1-AN #show running-config

  Building configuration...

  version 15.2

  3444-RCS1-YEAR host name

  no ip Routing

  USH - DM IP domain name

  DHCP excluded-address IP 192.168.29.89

  IP dhcp RCS1 pool

  network 192.168.29.88 255.255.255.248

  router by default - 192.168.28.1

  Rental 1 0

  interface BVI1

  IP 192.168.28.211 255.255.254.0

  no ip route cache

  default IP gateway - 192.168.28.1

  ---------|---------|---------|

  ---------|---------|---------|

  e.g. 3444-RCS2-AN #show running-config

  Building configuration...

  version 15.2

  3444-RCS2-YEAR host name

  no ip Routing

  USH - DM IP domain name

  DHCP excluded-address IP 192.168.129.81

  IP dhcp RCS2 pool

  network 192.168.129.80 255.255.255.248

  router by default - 192.168.128.1

  Rental 2 0

  interface BVI1

  IP 192.168.128.171 255.255.254.0

  no ip route cache

  default IP gateway - 192.168.128.1

  ---------|---------|---------|

  Thats the DHCP Pool range 192.168.29.88 through 192.168.28.95

  Well this will confuse your customers.

  And this is NOT how to set up your "range".   See below:

  DHCP excluded-address IP 192.168.29.1 192.168.29.87

  DHCP excluded-address IP 192.168.29.96 192.168.29.254

  IP dhcp RCS1 pool

  network 192.168.28.211 255.255.254.0

  router by default - 192.168.28.1

  Rental 1 0

• The request to connect to the Cisco Unified CCX application server has expired.

  Hello community Cisco!

  We currently have some question about the CAD. Several officers receive a timed mistake when they connect in CAD. The scenario is like this:

  1. agent tried to connect and receive an error message:

  "The request to connect to the server to application Cisco Unified CCX timed out. Please make sure your system is online and try again.

  2 agent hit retry and an error message is displayed:

  "Another agent has connected with the same extension. Your agent's office will sign, and then the application closes. »

  3. agent hit the OK and try to connect again, another error message appears:

  "The specified ID is already connected to an extension. You want to disconnect the ID so you can connect? »

  After continuing to try, agent is properly connected. However, the problem is intermittent and occurs on most of the agents. Please see accessories picture for reference.

  In addition, there was once the CUCM GUI is unresponsive to access (intermittent), although the ping on the server is ok.

  The system version and other info:

  * 9.1.1.20000 - 5 CUCM

  * UCCX 9.0.2.11003 - 44

  * LDAP is NOT used to connect to the CAD and the phone.

  Hope you can help me. Thank you!

  -Kenneth

  There was also, once the CUCM GUI is unresponsive to access (intermittent)

  This is the main reason for questions that your agents are faced to the it. If access to CUCM GUI is still slow, then restart the tomcat service using the service utils restart Tomcat Cisco of CLI and check whether or not it solves the problem.

  Preferably, I restart tomcat service on all servers of CM and then check.

  Concerning

  Deepak

• to reach a server on a VLAN that is not directly connected to the inside interface

  scénarion

  PIX 515

  6506 core with VLAN A, B, c. (intervlan routing is ok)

  vlanC is directly connected to the inside interface of the fw

  question

  How a crowd outside could reach a server ServerA on vlanA.

  Hello

  Concerning Point 1, Yes if the roads required for networks connected inside the network is done on pix.

  Concerning Point 2, if the IP address that you use within the network is routable (public IP), the command you gave will work. The command indicates that when 10.10.1.10 inside the network host wants to go outside the network, use the same IP address. Because NAT does not occur, the actual address of the server presents itself as the visible address and the address of the host. So if the IP address you specify is not a public IP address, outside world can't access.